State of charge estimation for lithium-ion pouch batteries based on stress measurement

Abstract State of charge (SOC) estimation is one of the important tasks of battery management system (BMS). Being different from other researches, a novel method of SOC estimation for pouch lithium-ion battery cells based on stress measurement is proposed. With a comprehensive experimental study, we find that, the stress of the battery during charge/discharge is composed of the static stress and the dynamic stress. The static stress, which is the measured stress in equilibrium state, corresponds to SOC, this phenomenon facilitates the design of our stress-based SOC estimation. The dynamic stress, on the other hand, is influenced by multiple factors including charge accumulation or depletion, current and historical operation, thus a multiple regression model of the dynamic stress is established. Based on the relationship between static stress and SOC, as well as the dynamic stress modeling, the SOC estimation method is founded. Experimental results show that the stress-based method performs well with a good accuracy, and this method offers a novel perspective for SOC estimation.

[1]  Yoshitsugu Sone,et al.  Understanding Volume Change in Lithium-Ion Cells during Charging and Discharging Using In Situ Measurements , 2007 .

[2]  Wei Sun,et al.  State of charge estimation of lithium-ion batteries based on an improved parameter identification method , 2015 .

[3]  Song-Yul Choe,et al.  Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery , 2013 .

[4]  Amartya Mukhopadhyay,et al.  Deformation and stress in electrode materials for Li-ion batteries , 2014 .

[5]  Robert J. Kee,et al.  A Computational Model of the Mechanical Behavior within Reconstructed LixCoO2 Li-ion Battery Cathode Particles , 2014 .

[6]  Ting Zhu,et al.  Stress generation during lithiation of high-capacity electrode particles in lithium ion batteries , 2013 .

[7]  Michael Pecht,et al.  Battery Management Systems in Electric and Hybrid Vehicles , 2011 .

[8]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[9]  John Newman,et al.  Stress generation and fracture in lithium insertion materials , 2005 .

[10]  Anna G. Stefanopoulou,et al.  Expansion of Lithium Ion Pouch Cell Batteries: Observations from Neutron Imaging , 2013 .

[11]  Andreas Gruhle,et al.  A new method for detecting lithium plating by measuring the cell thickness , 2014 .

[12]  Tsutomu Ohzuku,et al.  Direct evidence on anomalous expansion of graphite-negative electrodes on first charge by dilatometry , 2001 .

[13]  Gregory L. Plett,et al.  Sigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 1: Introduction and state estimation , 2006 .

[14]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 3. State and parameter estimation , 2004 .

[15]  Ningxin Zhang,et al.  Dissecting anode swelling in commercial lithium-ion batteries , 2012 .

[16]  Jae-Hyun Lee,et al.  Battery dimensional changes occurring during charge/discharge cycles—thin rectangular lithium ion and polymer cells , 2003 .

[17]  Craig B. Arnold,et al.  State of health and charge measurements in lithium-ion batteries using mechanical stress , 2014 .

[18]  Yoshitsugu Sone,et al.  In Situ Investigation of the Volume Change in Li-ion Cell with Charging and Discharging Satellite Power Applications , 2004 .

[19]  Xiaosong Hu,et al.  Adaptive unscented Kalman filtering for state of charge estimation of a lithium-ion battery for elec , 2011 .

[20]  Hongwen He,et al.  Online model-based estimation of state-of-charge and open-circuit voltage of lithium-ion batteries in electric vehicles , 2012 .

[21]  Hongwen He,et al.  A data-driven adaptive state of charge and power capability joint estimator of lithium-ion polymer battery used in electric vehicles , 2013 .