Study on Squeeze Casting Metal-zirconium Composite Die Material by Hot Press Sintering

[1]  Yu Chen,et al.  Oxidation behavior of Ni–Mo–Si alloy coatings fabricated on carbon steel by laser cladding , 2019, Surface and Coatings Technology.

[2]  C. Deng,et al.  Effect of partial crystallization of an amorphous layer on the mechanical properties of ceramic/metal-glass coating by thermal spraying , 2019, Ceramics International.

[3]  Xue-jian Liu,et al.  Densification of C/SiC composite surface by the hybrid process of laser cladding and subsequent heat treatment , 2019, Ceramics International.

[4]  S. Masuzaki,et al.  Heat loading behavior and thermomechanical analyses on plasma spray tungsten coated reduced-activation ferritic/martensitic steel , 2018, Fusion Engineering and Design.

[5]  Yu-Lin Shen,et al.  Parametric computational analysis of indentation-induced shear band formation in metal-ceramic multilayer coatings , 2018, Surface and Coatings Technology.

[6]  H. Hong,et al.  Preparation of nickel coating on ZTA particles by electroless plating , 2018, Ceramics International.

[7]  Kai-Ts'ung Yang,et al.  Non‐isothermal crystallization kinetics of Al2O3‐YAG amorphous ceramic coating deposited via plasma spraying , 2018 .

[8]  Baopeng Zhang,et al.  Microstructural evolution of plasma spray physical vapor deposited thermal barrier coatings at 1150 °C studied by impedance spectroscopy , 2018, Ceramics International.

[9]  A. V. Krasikov,et al.  Formation of Protective Ceramic-Metal Coatings on Steel Surfaces by Microarc Oxidation with Electro-Chemical Deposition of Nickel , 2018, Refractories and Industrial Ceramics.

[10]  A. Fomin,et al.  Composition, structure and mechanical properties of metal oxide coatings produced on titanium using plasma spraying and modified by micro-arc oxidation , 2018 .

[11]  Lei Jiang,et al.  Fabrication of diamond-structured composite materials with Ni-P-diamond particles by electroless plating , 2018 .

[12]  D. Leonard,et al.  Microstructural Analysis and Transport Properties of Thermally Sprayed Multiple-Layer Ceramic Coatings , 2018, Journal of Thermal Spray Technology.

[13]  Yufeng Zheng,et al.  Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface. , 2016, ACS applied materials & interfaces.

[14]  Ruirun Chen,et al.  Microstructure and mechanical properties of Al–6Zn–2.5Mg–1.8Cu alloy prepared by squeeze casting and solid hot extrusion , 2015 .

[15]  P. Senthil,et al.  Experimental Study and Squeeze Casting Process Optimization for High Quality AC2A Aluminium Alloy Castings , 2014 .

[16]  Chuanzhen Huang,et al.  A study on in-situ synthesis of TiB2–SiC ceramic composites by reactive hot pressing , 2014 .

[17]  V. S. Kumar,et al.  Squeeze Casting of Aluminium Metal Matrix Composites-An Overview , 2014 .

[18]  Yu-Hsaun Lin,et al.  Preparation of Cu , 2013 .

[19]  C. Xu,et al.  Research on the Hot Pressing Parameters of Ti (C,N)/Al2O3 Nanocomposite Ceramic Die Material and the Material Fabrication , 2013 .

[20]  L. A. Sosnovskii,et al.  The structure and phase composition of boride coatings on sintered powder steels , 2013, Powder Metallurgy and Metal Ceramics.

[21]  H. Sun,et al.  The preparation of Cu-coated Al2O3 composite powders by electroless plating , 2011 .

[22]  Ahmed Rassili,et al.  A review on steel thixoforming , 2010 .

[23]  Wei He,et al.  Effects of the casting temperature on microstructure and mechanical properties of the squeeze-cast Al–Zn–Mg–Cu alloy , 2010 .

[24]  W. Kim,et al.  Micro-forming of Zr65Al10Ni10Cu15 metallic glasses under superplastic condition , 2009 .

[25]  L. Barrallier,et al.  Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al-Si powder , 2008 .

[26]  Yanchun Zhou,et al.  Physical and Mechanical Properties of Bulk Ta4AlC3 Ceramic Prepared by an In Situ Reaction Synthesis/Hot‐Pressing Method , 2007 .

[27]  B. Niroumand,et al.  Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy , 2006 .

[28]  Z. Fan,et al.  In situ Al 3 Ti–Al 2 O 3 intermetallic matrix composite: Synthesis, microstructure, and compressive behavior , 2000 .

[29]  M. R. Ghomashchi,et al.  Squeeze casting: an overview , 2000 .