Study of Performance of Knitted Conductive Sleeves as Wearable Textile Strain Sensors for Joint Motion Tracking

Textile-based strain sensors combine wearability with strain sensing functionality by using only the tensile and electrical properties of the threads they are made of. In this study, two conductive sleeves were manufactured for the elbow and three for the knee using a Santoni circular machine with different combinations of elastomeric and non-elastomeric yarns. Linearity, repeatability and sensitivity of the sleeves resistance with strain were compared during 5 repetitive trials, each of them consisting of 4 sequences of 50 joint flexion-extension cycles. All knitted conductive sleeves registered motion over 1000 cycles, proving their suitability for joint motion tracking. In addition, sleeves whose inner layer was made only with nylon exhibited the highest sensitivity and predictability of changes (i.e. a linear trend of the non-elastic deformation). On the other hand, sleeves whose inner layer was made with lycra and polyester or lycra and nylon showed a more balanced performance in terms of linearity, sensitivity and repeatability either for low or high number of cycles. Based on requirements, knitted conductive sleeves show a potential for application in rehabilitation both in healthcare and sports.

[1]  Tapas Mondal,et al.  Wearable Sensors for Remote Health Monitoring , 2017, Sensors.

[2]  Bridget J. Munro,et al.  The intelligent knee sleeve: a wearable biofeedback device , 2008 .

[3]  David T. Branson,et al.  Effect of mechanical preconditioning on the electrical properties of knitted conductive textiles during cyclic loading , 2019 .

[4]  Rita Paradiso,et al.  WEALTHY – a wearable healthcare system: new frontier on e-textile , 2005, Journal of Telecommunications and Information Technology.

[5]  K. Hata,et al.  A stretchable carbon nanotube strain sensor for human-motion detection. , 2011, Nature nanotechnology.

[6]  Ozgur Atalay,et al.  Textile-Based Weft Knitted Strain Sensors: Effect of Fabric Parameters on Sensor Properties , 2013, Sensors.

[7]  L. Gao,et al.  A Stretchable and Highly Sensitive Graphene‐Based Fiber for Sensing Tensile Strain, Bending, and Torsion , 2015, Advanced materials.

[8]  Rafiu King Raji,et al.  Influence of Rib Structure and Elastic Yarn Type Variations on Textile Piezoresistive Strain Sensor Characteristics , 2018, Fibres and Textiles in Eastern Europe.

[9]  Tien-Wei Shyr,et al.  A Textile-Based Wearable Sensing Device Designed for Monitoring the Flexion Angle of Elbow and Knee Movements , 2014, Sensors.

[10]  Cristina Isaia.  Characterisation of knitted conductive textiles for wearable motion sensor applications , 2018 .

[11]  R. Holm.  Electric contacts; theory and application , 1967 .

[12]  Maryam Naebe,et al.  Textile strain sensors: a review of the fabrication technologies, performance evaluation and applications , 2019, Materials Horizons.