A Practical Robotic End-Effector for Grasping Postal Sacks

This article describes a new class of end-effectors that can be used with robotic and material handling devices for grabbing and holding deformable objects with undefined shapes such as sacks and bags. These end-effectors can grab and hold filled sacks from any point on the sack and regardless of the sack orientation and position. The first prototype end-effector, designed for the U.S. Postal Service, has two rollers. The rollers are pushed toward each other by the force of a spring. When the rollers are powered to spin, the inward spinning of the rollers causes the sack material to be dragged in between the rollers due to the friction between the surfaces of the rollers and the sack material. The spring pushes the rollers toward each other with sufficient force to hold the sack material in place between the rollers. The end-effector described here has been evaluated and proven to be exceedingly effective in grabbing and holding postal sacks. This article describes the underlying principles of the design, grasp conditions and control of the end-effector.

[1]  John Kenneth Salisbury,et al.  Augmentation of grasp robustness using intrinsic tactile sensing , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[2]  Gregory D. Hager,et al.  Preliminary results on grasping with vision and touch , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[3]  John Kenneth Salisbury,et al.  Contact Sensing from Force Measurements , 1990, Int. J. Robotics Res..

[4]  Ronald S. Fearing,et al.  Simplified Grasping and Manipulation with Dextrous Robot Hands , 1984, 1984 American Control Conference.

[5]  B. Mishra,et al.  Some discussion of static gripping and its stability , 1989, IEEE Trans. Syst. Man Cybern..

[6]  Van-Duc Nguyen,et al.  Constructing Stable Grasps , 1989, Int. J. Robotics Res..

[7]  Kenneth Y. Goldberg,et al.  Orienting polygonal parts without sensors , 1993, Algorithmica.

[8]  John F. Canny,et al.  Planning optimal grasps , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[9]  Hideaki Hashimoto,et al.  Development of a multi-fingered robot hand with fingertip tactile sensors , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[10]  Matthew T. Mason,et al.  Mechanics and Planning of Manipulator Pushing Operations , 1986 .

[11]  Van-Duc Nguyen,et al.  Constructing Force- Closure Grasps , 1988, Int. J. Robotics Res..

[12]  Bruno M. Jau,et al.  Man-equivalent telepresence through four fingered human-like hand system , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[13]  Allison M. Okamura,et al.  Haptic exploration of objects with rolling and sliding , 1997, Proceedings of International Conference on Robotics and Automation.

[14]  R. S. Fearing,et al.  Tactile Sensing Mechanisms , 1990, Int. J. Robotics Res..

[15]  Tomás Lozano-Pérez,et al.  Grasp stability and feasibility for an arm with an articulated hand , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[16]  Mark R. Cutkosky,et al.  Practical Force-Motion Models for Sliding Manipulation , 1996, Int. J. Robotics Res..

[17]  Jean Ponce,et al.  On Computing Two-Finger Force-Closure Grasps of Curved 2D Objects , 1993, Int. J. Robotics Res..

[18]  Jean Ponce,et al.  On computing three-finger force-closure grasps of polygonal objects , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[19]  Mark R. Cutkosky,et al.  Dynamic tactile sensing: perception of fine surface features with stress rate sensing , 1993, IEEE Trans. Robotics Autom..