Experimental determination of the lower flammability limit and limiting oxygen concentration of propanal/air mixtures under elevated temperatures and pressures

[1]  C. Shu,et al.  Effects of initial temperature and pressure on explosion characteristics of propane–diluent–air mixtures , 2021 .

[2]  Pengliang Li,et al.  Investigation on the limiting oxygen concentration of combustible gas at high pressures and temperatures during oil recovery process , 2021 .

[3]  J. Jeon,et al.  Improved prediction model for H2/CO combustion risk using a calculated non-adiabatic flame temperature model , 2020 .

[4]  Zhuo Wang,et al.  Lower flammability limit of H2/CO/air mixtures with N2 and CO2 dilution at elevated temperatures , 2020 .

[5]  Pengliang Li,et al.  Experimental study on the flammability limits of natural gas/air mixtures at elevated pressures and temperatures , 2019, Fuel.

[6]  E. Askar,et al.  Explosion regions of acetone and alcohol/inert gas/air mixtures at high temperatures and atmospheric pressure , 2019, Journal of Loss Prevention in the Process Industries.

[7]  G. Cui,et al.  Effect of elevated pressure on the explosion and flammability limits of methane-air mixtures , 2019, Energy.

[8]  Xingqing Yan,et al.  A research on flammability limits of the refrigerant HCFC-22/air mixtures at elevated pressures , 2019, Journal of Loss Prevention in the Process Industries.

[9]  Shufeng Pei,et al.  Assessment of flammability and explosion risks of natural gas-air mixtures at high pressure and high temperature , 2019, Fuel.

[10]  Xingqing Yan,et al.  Effect of super-ambient conditions on the upper explosion limit of ethane/oxygen and ethylene/oxygen mixtures , 2019, Journal of Loss Prevention in the Process Industries.

[11]  P. Dagaut,et al.  New insights into propanal oxidation at low temperatures: An experimental and kinetic modeling study , 2019, Proceedings of the Combustion Institute.

[12]  A. Konnov,et al.  An experimental and kinetic study of propanal oxidation , 2018, Combustion and Flame.

[13]  V. McDonell,et al.  Lean Flammability Limits of Syngas/Air Mixtures at Elevated Temperatures and Pressures , 2018, Energy & Fuels.

[14]  G. Shu,et al.  A new model based on adiabatic flame temperature for evaluation of the upper flammable limit of alkane-air-CO2 mixtures. , 2018, Journal of hazardous materials.

[15]  Elisabeth Brandes,et al.  Influence of pressure, temperature and vessel volume on explosion characteristics of ethanol/air mixtures in closed spherical vessels , 2017 .

[16]  Chao Yang,et al.  Experimental study of flammability limits of methane/air mixtures at low temperatures and elevated pressures , 2016 .

[17]  A. Konnov,et al.  Experimental and modelling study of 1CH2 in premixed very rich methane flames , 2016 .

[18]  M. A. Hassan,et al.  Explosion regions of propane, isopropanol, acetone, and methyl acetate/inert gas/air mixtures , 2016 .

[19]  H. Liaw,et al.  A model for predicting temperature effect on flammability limits , 2016 .

[20]  Gan Cui,et al.  Experimental study of minimum ignition energy of methane/air mixtures at elevated temperatures and pressures , 2016 .

[21]  Zuo-hua Huang,et al.  Shock Tube Study on Propanal Ignition and the Comparison to Propane, n-Propanol, and i-Propanol , 2016 .

[22]  Zuo-hua Huang,et al.  Laminar flame speeds and ignition delay times of methane–air mixtures at elevated temperatures and pressures , 2015 .

[23]  H. Curran,et al.  An experimental and kinetic modeling study of the pyrolysis and oxidation of n- C3–C5 aldehydes in shock tube , 2018 .

[24]  Christopher J. Welch,et al.  Experimental Limiting Oxygen Concentrations for Nine Organic Solvents at Temperatures and Pressures Relevant to Aerobic Oxidations in the Pharmaceutical Industry , 2014, Organic process research & development.

[25]  Zuo-hua Huang,et al.  A comparative study of n-propanol, propanal, acetone, and propane combustion in laminar flames , 2015 .

[26]  Bo Zhang,et al.  Explosion characteristics of argon/nitrogen diluted natural gas–air mixtures , 2014 .

[27]  S. M. Sarathy,et al.  Jet-stirred reactor and flame studies of propanal oxidation , 2013 .

[28]  Christian J R Coronado,et al.  Flammability limits: a review with emphasis on ethanol for aeronautical applications and description of the experimental procedure. , 2012, Journal of hazardous materials.

[29]  Domnina Razus,et al.  Explosion of gaseous ethylene-air mixtures in closed cylindrical vessels with central ignition. , 2012, Journal of hazardous materials.

[30]  C. Law,et al.  Hierarchical and comparative kinetic modeling of laminar flame speeds of hydrocarbon and oxygenated fuels , 2012 .

[31]  J. Bergthorson,et al.  Ignition of C3 oxygenated hydrocarbons and chemical kinetic modeling of propanal oxidation , 2011 .

[32]  C. C. Liu,et al.  On interaction of centrally-ignited, outwardly-propagating premixed flames with fully-developed isotropic turbulence at elevated pressure , 2011 .

[33]  A. Konnov,et al.  Laminar burning velocities of three C3H6O isomers at atmospheric pressure , 2010 .

[34]  I. Zlochower,et al.  The limiting oxygen concentration and flammability limits of gases and gas mixtures , 2009 .

[35]  Hailong Li,et al.  Evaluating cubic equations of state for calculation of vapor–liquid equilibrium of CO2 and CO2-mixtures for CO2 capture and storage processes , 2009 .

[36]  E. V. D. Bulck,et al.  Flammability limits, limiting oxygen concentration and minimum inert gas/combustible ratio of H2/CO/N2/air mixtures , 2009 .

[37]  P. Oßwald,et al.  Structure of a stoichiometric propanal flame at low pressure , 2009 .

[38]  Ali M.A. Attia,et al.  Laminar burning velocity and explosion index of LPG-air and propane-air mixtures , 2008 .

[39]  Dong-Myeong Ha,et al.  Measurement and estimation of the lower flash points for the flammable binary systems using a Tag open cup tester , 2007 .

[40]  F. V. D. Schoor,et al.  Explosion limits of mixtures relevant to the production of 1,2 dichloroethane (ethylene dichloride) , 2007 .

[41]  Dumitru Oancea,et al.  The rate of pressure rise of gaseous propylene-air explosions in spherical and cylindrical enclosures. , 2007, Journal of hazardous materials.

[42]  M. Mannan,et al.  Evaluation of lower flammability limits of fuel-air-diluent mixtures using calculated adiabatic flame temperatures. , 2006, Journal of hazardous materials.

[43]  D. Razus,et al.  Estimation of LOC (limiting oxygen concentration) of fuel–air–inert mixtures at elevated temperatures by means of adiabatic flame temperatures , 2006 .

[44]  D. Razus,et al.  Limiting oxygen concentration evaluation in flammable gaseous mixtures by means of calculated adiabatic flame temperatures , 2004 .

[45]  L. G. Britton.  Using heats of oxidation to evaluate flammability hazards , 2002 .

[46]  Chad V. Mashuga,et al.  Flammability zone prediction using calculated adiabatic flame temperatures , 1999 .

[47]  S. Kondo,et al.  Fusing ignition of various metal wires for explosion limits measurement of methane/air mixture , 1998 .

[48]  G. Melhem.  A detailed method for estimating mixture flammability limits using chemical equilibrium , 1997 .

[49]  Yoshio Ogawa,et al.  Flame-extinguishing concentrations and peak concentrations of N2, Ar, CO2 and their mixtures for hydrocarbon fuels , 1996 .

[50]  E. U. Franck,et al.  High Pressure Combustion – Ignition Temperatures to 1000 bar , 1995 .

[51]  T. S. Norton,et al.  The flow reactor oxidation of C1−C4 alcohols and MTBE , 1991 .

[52]  Ali Danesh,et al.  Comparative study of cubic equations of state for predicting phase behaviour and volumetric properties of injection gas-reservoir oil systems , 1991 .

[53]  E. Mayer.  A theory of flame propagation limits due to heat loss , 1957 .