Mechanical and ablation properties of a C/C-HfB2-SiC composite prepared by high-solid-loading slurry impregnation combined with precursor infiltration and pyrolysis

[1]  Yicheng Ge,et al.  Effects of silanization of C/C composites and grafting of h-BN fillers on the microstructure and interfacial properties of CVI-based C/C-BN composites , 2020 .

[2]  D. Sciti,et al.  Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs , 2020 .

[3]  J. Binner,et al.  Development of a slurry injection technique for continuous fibre ultra-high temperature ceramic matrix composites , 2019, Journal of the European Ceramic Society.

[4]  Fei Rao,et al.  Preparation and properties of C/C−ZrB2−SiC composites by high-solid-loading slurry impregnation and polymer infiltration and pyrolysis (PIP) , 2019, Transactions of Nonferrous Metals Society of China.

[5]  Yicheng Ge,et al.  Microstructure and ablation behaviour of a carbon/carbon-ZrC-Cu composite prepared by adding Ti to Zr/Cu powder mixture , 2019, Corrosion Science.

[6]  Q. Fu,et al.  Ablation behavior of nose-shaped HfB2-SiC modified carbon/carbon composites exposed to oxyacetylene torch , 2019, Corrosion Science.

[7]  J. Binner,et al.  Materials characterisation and mechanical properties of Cf-UHTC powder composites , 2019, Journal of the European Ceramic Society.

[8]  Wei Sun,et al.  Microstructure, thermophysical properties, and ablation resistance of C/HfC-ZrC-SiC composites , 2019, Ceramics International.

[9]  M. De Stefano Fumo,et al.  Oxidation response of a SiCf/SiC CMC with a HfB2-based coating in an arc jet test , 2018, Advances in Applied Ceramics.

[10]  Yuan Cheng,et al.  Architectural engineering inspired method of preparing Cf /ZrC-SiC with graceful mechanical responses , 2018, Journal of the American Ceramic Society.

[11]  Tie-jun Wang,et al.  Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites , 2018 .

[12]  H. Baharvandi,et al.  Effects of SiC or MoSi2 second phase on the oxide layers structure of HfB2-based composites , 2017 .

[13]  Lai-fei Cheng,et al.  Effect of B4C on the microstructure and properties of B4C modified three-dimensional needled C/C-SiC composites , 2017 .

[14]  Q. Fu,et al.  Preparation, ablation behavior and thermal retardant ability of C/C-HfB2-SiC composites , 2017 .

[15]  Hejun Li,et al.  Effect of ZrC particle size on the ablation resistance of C/C-ZrC-SiC composites , 2017 .

[16]  P. Withers,et al.  Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C , 2017, Nature Communications.

[17]  Yanfei Wang,et al.  Effects of SiC/HfC ratios on the ablation and mechanical properties of 3D Cf/HfC-SiC composites , 2017 .

[18]  Xiaohong Shi,et al.  Effects of SiC interphase on the mechanical and ablation properties of C/C-ZrC-ZrB2-SiC composites prepared by precursor infiltration and pyrolysis , 2017 .

[19]  J. Binner,et al.  Evaluation of the high temperature performance of HfB2 UHTC particulate filled Cf/C composites , 2017 .

[20]  Hejun Li,et al.  SiC/ZrB2–SiC–ZrC multilayer coating for carbon/carbon composites against ablation , 2016 .

[21]  Jianfeng Huang,et al.  Fabrication of gradient C/C-SiC-MoSi2 composites with enhanced ablation performance , 2016 .

[22]  Hejun Li,et al.  Ablation resistance of SiC–HfC–ZrC multiphase modified carbon/carbon composites , 2016 .

[23]  C. Ren,et al.  Single fiber push-out characterization of interfacial mechanical properties in unidirectional CVI-C/SiC composites by the nano-indentation technique , 2015 .

[24]  Qizhong Huang,et al.  Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis , 2015 .

[25]  Rongjun Liu,et al.  Zirconium carbide, hafnium carbide and their ternary carbide nanoparticles by an in situ polymerization route , 2015 .

[26]  Bala Vaidhyanathan,et al.  UHTC composites for hypersonic applications , 2014 .

[27]  Rongjun Liu,et al.  Fabrication and properties of PIP 3D Cf/ZrC–SiC composites , 2014 .

[28]  Wei Sun,et al.  Effect of fiber architecture and density on the ablation behavior of carbon/carbon composites modified by Zr–Ti–C , 2013 .

[29]  Hejun Li,et al.  Effect of heat flux on ablation behaviour and mechanism of C/C–ZrB2–SiC composite under oxyacetylene torch flame , 2013 .

[30]  S. Dong,et al.  Properties of Cf/SiC composites modified by a boron- containing phase , 2013 .

[31]  Lai-fei Cheng,et al.  Microstructure and tribological behaviors of C/C–BN composites fabricated by chemical vapor infiltration , 2012 .

[32]  Song Wang,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of Cf/SiC composites using polycarbosilane , 2011 .

[33]  Lai-fei Cheng,et al.  Fracture behavior and mechanism of 2D C/SiC–BCx composite at room temperature , 2011 .

[34]  Xu Yongdong,et al.  Effects of TaC addition on the ablation resistance of C/SiC , 2010 .

[35]  V. Medri,et al.  Oxidation behaviour of HfB2–15 vol.% TaSi2 at low, intermediate and high temperatures , 2010 .

[36]  Erica L. Corral,et al.  Improved ablation resistance of C–C composites using zirconium diboride and boron carbide , 2010 .

[37]  J. Halloran,et al.  Formation of Oxide Films on ZrB2–15 vol% SiC Composites During Oxidation: Evolution with Time and Temperature , 2009 .

[38]  J. Halloran,et al.  Formation of Oxide Scales on Zirconium Diboride–Silicon Carbide Composites During Oxidation: Relation of Subscale Recession to Liquid Oxide Flow , 2008 .

[39]  M. Pavese,et al.  HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties , 2008 .

[40]  M. Weinmann,et al.  Fabrication of Fiber‐Reinforced Ceramic Composites by the Modified Slurry Infiltration Technique , 2007 .

[41]  William G. Fahrenholtz,et al.  Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC‐Depleted Region , 2007 .

[42]  F. Monteverde.  Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2–SiC composite , 2005 .

[43]  A. Bellosi,et al.  The resistance to oxidation of an HfB2–SiC composite , 2005 .

[44]  Donald T. Ellerby,et al.  Processing, properties and arc jet oxidation of hafnium diboride/silicon carbide ultra high temperature ceramics , 2004 .

[45]  R. Naslain.  Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview , 2004 .

[46]  Shanyi Du,et al.  Oxidation and ablation of 3D carbon-carbon composite at up to 3000 °C , 1995 .

[47]  M. L. Lieberman,et al.  Effect of gas phase conditions on resultant matrix pyrocarbons in carbon/carbon composites , 1973 .