Topology optimization of thermal actuator and its support using the level set based multiple–type boundary method and sensitivity analysis based on constrained variational principle

Thermal actuator uses thermal expansion of an elastic body to produce motion at its output port. It needs to accumulate and amplify small local thermal expansion to ensure its output displacement is large enough. Also, its support should constrain the thermal expansion in irrelevant directions and steer the output displacement to a required direction. In the present paper, the task of designing a thermal actuator is formulated as a topology optimization problem. The design variables include two types of boundaries: the free boundary and the Dirichlet boundary. The optimization problem is solved by using a level set based multiple–type boundary method. Two level set functions are used to represent a thermal actuator and its two types of boundaries. Evolution of the two boundaries is modeled by two independent Hamilton–Jacobi equations. In order to analyze the shape derivatives of the two boundaries, the constrained variational principle is employed to explicitly include the Dirichlet boundary condition into the weak form equation of linear thermoelasticity. Numerical examples in two dimensions are investigated.

[1]  Ole Sigmund,et al.  Compliant thermal microactuators , 1999 .

[2]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[3]  M. Wang,et al.  Topology optimization of thermoelastic structures using level set method , 2008 .

[4]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[5]  Xiaoming Wang,et al.  Structural shape and topology optimization in a level-set-based framework of region representation , 2004 .

[6]  T. Shi,et al.  Topology optimization with pressure load through a level set method , 2015 .

[7]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[8]  Jian Zhang,et al.  A new topology optimization approach based on Moving Morphable Components (MMC) and the ersatz material model , 2016 .

[9]  Antonio Huerta,et al.  Imposing essential boundary conditions in mesh-free methods , 2004 .

[10]  T. Buhl.  Simultaneous topology optimization of structure and supports , 2002 .

[11]  Ole Sigmund,et al.  Topology optimized electrothermal polysilicon microgrippers , 2008 .

[12]  Gil Ho Yoon,et al.  Topological layout design of electro-fluid-thermal-compliant actuator , 2012 .

[13]  Jianhua Zhou,et al.  Structural Topology Optimization Through Explicit Boundary Evolution , 2017 .

[14]  Tielin Shi,et al.  Optimization of structures with thin-layer functional device on its surface through a level set based multiple-type boundary method , 2016 .

[15]  Zhu Jihong,et al.  Maximization of structural natural frequency with optimal support layout , 2006 .

[16]  Yoon Young Kim,et al.  Optimization of Support Locations of Beam and Plate Structures Under Self-Weight by Using a Sprung Structure Model , 2009 .

[17]  Noboru Kikuchi,et al.  Topology optimization of thermally actuated compliant mechanisms considering time-transient effect , 2004 .

[18]  Yoon Young Kim,et al.  Minimum scale controlled topology optimization and experimental test of a micro thermal actuator , 2008 .

[19]  G. Allaire,et al.  A level-set method for shape optimization , 2002 .

[20]  H. Rodrigues,et al.  A material based model for topology optimization of thermoelastic structures , 1995 .

[21]  Xu Guo,et al.  Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach , 2017, 1704.06060.

[22]  Tao Jiang,et al.  Topology design to improve HDD suspension dynamic characteristics , 2006 .

[23]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .

[24]  L. Tong,et al.  A level set method for shape and topology optimization of large‐displacement compliant mechanisms , 2008 .

[25]  W. Riethmuller,et al.  Thermally excited silicon microactuators , 1988 .

[26]  Victor M. Bright,et al.  Applications for surface-micromachined polysilicon thermal actuators and arrays , 1997 .

[27]  Ole Sigmund,et al.  Topology synthesis of large‐displacement compliant mechanisms , 2001 .

[28]  Weihong Zhang,et al.  Shape optimization of Dirichlet boundaries based on weighted B-spline finite cell method and level-set function , 2015 .

[29]  Xu Guo,et al.  Doing Topology Optimization Explicitly and Geometrically—A New Moving Morphable Components Based Framework , 2014 .

[30]  T. Shi,et al.  A level set method for shape and topology optimization of both structure and support of continuum structures , 2014 .

[31]  T. Shi,et al.  Topology optimization of compliant mechanism and its support through a level set method , 2016 .

[32]  Jihong Zhu,et al.  Integrated layout design of supports and structures , 2010 .

[33]  Weihong Zhang,et al.  Topology optimization involving thermo-elastic stress loads , 2010 .

[34]  Kyung K. Choi,et al.  Structural sensitivity analysis and optimization , 2005 .

[35]  Jack W. Judy,et al.  Surface micromachined linear thermal microactuator , 1990, International Technical Digest on Electron Devices.

[36]  T. Shi,et al.  A level set solution to the stress-based structural shape and topology optimization , 2012 .

[37]  Zhen Luo,et al.  Shape and topology optimization for electrothermomechanical microactuators using level set methods , 2009, J. Comput. Phys..