Large-stroke self-aligned vertical comb drive actuators for adaptive optics applications

A high-stroke micro-actuator array was designed, modeled, fabricated and tested. Each pixel in the 4x4 array consists of a self-aligned vertical comb drive actuator. This micro-actuator array was designed to become the foundation of a micro-mirror array that will be used as a deformable mirror for adaptive optics applications. Analytical models combined with CoventorWare(R) simulations were used to design actuators that would move up to 10 microns in piston motion with 100V applied. Devices were fabricated according to this design and testing of these devices demonstrated an actuator displacement of 1.4 microns with 200V applied. Further investigation revealed that fabrication process inaccuracy led to significantly stiffer mechanical springs in the fabricated devices. The increased stiffness of the springs was shown to account for the reduced displacement of the actuators relative to the design.

[1]  V. Bright,et al.  Flip-chip fabrication of advanced micromirror arrays , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[2]  William J. Kaiser,et al.  Fabrication and characterization of a micromachined deformable mirror for adaptive optics applications , 1993, Defense, Security, and Sensing.

[3]  Scot S. Olivier,et al.  MOEMS spatial light modulator development at the Center for Adaptive Optics , 2003, SPIE MOEMS-MEMS.

[4]  M.C. Wu,et al.  Monolithically cascaded micromirror pair driven by angular vertical combs for two-axis scanning , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[5]  Skandar Basrour,et al.  Deformable magnetic mirror for adaptive optics: technological aspects , 2001 .

[6]  D. McCormick,et al.  Gimbal-less monolithic silicon actuators for tip-tilt-piston micromirror applications , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[7]  Luke P. Lee,et al.  A novel microfabrication of a self-aligned vertical comb drive on a single SOI wafer for optical MEMS applications , 2005 .

[8]  R. Howe,et al.  Fluidic self-assembly of micromirrors onto microactuators using capillary forces , 2002 .

[9]  Robert K. Tyson,et al.  Adaptive Optics Engineering Handbook , 1999 .

[10]  Olav Solgaard,et al.  Single-crystalline silicon micromirrors actuated by self-aligned vertical electrostatic combdrives with piston-motion and rotation capability , 2004 .

[11]  Peter B. Catrysse,et al.  Silicon deformable mirrors and CMOS-based wavefront sensors , 2000, SPIE Optics + Photonics.

[12]  Ai Qun Liu,et al.  Fabrication technique for microelectromechanical systems vertical comb-drive actuators on a monolithic silicon substrate , 2005 .

[13]  V. Milanovic,et al.  Vertical combdrive based 2-D gimbaled micromirrors with large static rotation by backside island isolation , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[14]  Siyuan He,et al.  Large-stroke microelectrostatic actuators for vertical translation of micromirrors used in adaptive optics , 2005, IEEE Transactions on Industrial Electronics.

[15]  D R Williams,et al.  Supernormal vision and high-resolution retinal imaging through adaptive optics. , 1997, Journal of the Optical Society of America. A, Optics, image science, and vision.

[16]  Chi-Hoon Jun,et al.  A self-aligned vertical comb-drive actuator on an SOI wafer for a 2D scanning micromirror , 2004 .

[17]  O. Solgaard,et al.  Self-aligned vertical electrostatic combdrives for micromirror actuation , 2003 .

[18]  S. Middelhoek,et al.  Technology and applications of micromachined silicon adaptive mirrors , 1997 .

[19]  B. Levine,et al.  Adaptive optic correction using microelectromechanical deformable mirrors , 2002 .

[20]  Chingfu Tsou,et al.  A novel self-aligned vertical electrostatic combdrives actuator for scanning micromirrors , 2005 .