Modeling breakage rates in mills with impact energy spectra and ultra fast load cell data

Abstract A new era in modeling particle size distribution in grinding mills started at the beginning of 2000s. A direct estimation of breakage parameters became possible via computation of collision energy by discrete element method (DEM) and material breakage data. The material breakage data can be obtained for primary modes of breakage. In this study, impact and abrasion are assumed to be the primary modes of particle breakage, which are readily studied in the laboratory. The impact breakage mode is studied in a drop-weight apparatus and in a specialized device known as the ultra fast load cell. The abrasion mode of breakage is studied in a laboratory scale ball mill. Next, the particle breakage versus energy data is converted into breakage rates via impact energy spectra of the grinding mill computed by a DEM code. The fundamental material breakage information is converted into energy based breakage distribution function. The verification of the modeling concepts is shown for a 90 cm laboratory scale ball mill. In the batch mill, approximately a 10 kg mass of limestone in the 30 mm size is ground with around 100 kg of 50 mm steel ball charge. The breakage rate and the breakage distribution functions constitute the parameters of the energy based batch population balance model. It is shown that accurate particle size distribution predictions are possible with this modeling approach for different grinding regimes.