论文信息 - Vehicle-Hardware-In-The-Loop system for ADAS prototyping and validation

Vehicle-Hardware-In-The-Loop system for ADAS prototyping and validation

This paper introduces an innovative system easing prototyping and validation of Advanced Driver Assistance Systems (ADAS) for automotive applications. This system, based on a chassis-dynamometer and a multi-sensor simulation software, act as a virtual reality platform for intelligent vehicle. This system allows to test and validate complex ADAS systems under various simulated environmental conditions and scenario without the cost, complexity and hazard associated with test-drives. It can also be used early in the design process to test and validate the integration of multiple ADAS in a vehicle. This system is being used for the Virtual Testing applications in the DESERVE1 project.

Xavier Savatier | Romain Rossi | Clement Galko

[1] Nicolas Hiblot,et al. Pro-SiVIC and ROADS, a software suite for sensors simulation and virtual prototyping of ADAS , 2010 .

[2] Ieee Staff. 2014 International Conference on Embedded Computer Systemsarchitectures, Modeling, and Simulation (Samos Xiv) , 2014 .

[3] Amnon Shashua,et al. A Monocular Vision Advance Warning System for the Automotive Aftermarket , 2005 .

[4] Fawzi Nashashibi,et al. /sup RT/m@ps: a framework for prototyping automotive multi-sensor applications , 2000, Proceedings of the IEEE Intelligent Vehicles Symposium 2000 (Cat. No.00TH8511).

[5] Michel Verhaegen,et al. Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations , 2006 .

[6] Bruno Steux,et al. RTM@PS: A FRAMEWORK FOR PROTOTYPING AUTOMOTIVE MULTI-SENSOR APPLICATIONS , 2000 .