Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact

An analytical approach for stress analysis of gear drives with localized bearing contact based on the Hertz theory is proposed. The proposed approach provides a complete and effective solution of the contact problem but satisfaction of the hypotheses for application of the Hertz theory is its main drawback. On the other hand, a finite element model has been developed and validated in terms of the contact area, maximum contact pressure, pressure distribution, maximum Tresca stress, and Tresca stress distribution underneath the contacting surfaces. Validation of the finite element model is provided for those cases wherein the Hertz theory can be applied. The obtained results confirm the applicability of the proposed approach for gear drives with localized bearing contact wherein edge contact is avoided by surface modifications and whole crowning of tooth surfaces is provided.

[1]  Ahmet Kahraman,et al.  A load distribution model for hypoid gears using ease-off topography and shell theory , 2009 .

[2]  H WinkCarlos,et al.  Performance assessment of solution methods for load distribution problem of gear teeth , 2008 .

[3]  Faydor L. Litvin,et al.  Topology of modified surfaces of involute helical gears with line contact developed for improvement of bearing contact, reduction of transmission errors, and stress analysis , 2005, Math. Comput. Model..

[4]  Milton Abramowitz,et al.  Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables , 1964 .

[5]  Alfonso Fuentes,et al.  Computerized integrated approach for design and stress analysis of spiral bevel gears , 2002 .

[6]  Faydor L. Litvin,et al.  Modified involute helical gears: computerized design, simulation of meshing and stress analysis , 2003 .

[7]  Shyi-Jeng Tsai,et al.  Contact stress analysis of skew conical involute gear drives in approximate line contact , 2009 .

[8]  K Mao,et al.  An approach for powertrain gear transmission error prediction using the non-linear finite element method , 2006 .

[9]  F. Litvin,et al.  Gear geometry and applied theory , 1994 .

[10]  A Kawalec,et al.  Simulation of generation and tooth contact analysis of helical gears with crowned flanks , 2008 .

[11]  Faydor L. Litvin,et al.  Application and Investigation of Modified Helical Gears With Several Types of Geometry , 2007 .

[12]  Andrey Volkov,et al.  Algorithms for analysis of meshing and contact of spiral bevel gears , 2007 .