Integral backstepping control of servo actuators with LuGre model-based friction compensation

This paper concerns high-accuracy tracking control for servo actuators with nonlinear friction compensation. Friction is a major factor that affects the performance of the servo system, in order to express the characteristics of nonlinear friction more accurately and improve the control performance of the system, the LuGre dynamic friction model is applied, it can more fully described the friction phenomena. Firstly, a nonlinear observer is designed to estimate the internal state of the LuGre model. Then, based on the estimated friction state, the unknown friction and load torque compensation are realized by the integral backstepping adaptive controller, and the stability of the closed loop system is proved by the Lyapunov function. The simulation results show that this algorithm improves the control performance of the system.

[1]  Zongxia Jiao,et al.  Adaptive Control of Hydraulic Actuators With LuGre Model-Based Friction Compensation , 2015, IEEE Transactions on Industrial Electronics.

[2]  Hualin Tan,et al.  Adaptive backstepping control and friction compensation for AC servo with inertia and load uncertainties , 2003, IEEE Trans. Ind. Electron..

[3]  Wen-Fang Xie,et al.  Sliding-Mode Observer Based Adaptive Control for Servo Actuator with Friction , 2007, 2007 International Conference on Mechatronics and Automation.

[4]  Brian Armstrong-Hélouvry,et al.  Control of machines with friction , 1991, The Kluwer international series in engineering and computer science.

[5]  Zongxia Jiao,et al.  Adaptive Robust Motion Control of Direct-Drive DC Motors with Continuous Friction Compensation , 2013 .

[6]  Leonid B. Freidovich,et al.  LuGre-Model-Based Friction Compensation , 2010, IEEE Transactions on Control Systems Technology.

[7]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[8]  Li-Chen Fu,et al.  Adaptive Approach to Motion Controller of Linear Induction Motor with Friction Compensation , 2007, IEEE/ASME Transactions on Mechatronics.

[9]  Kok Kiong Tan,et al.  Adaptive friction compensation using neural network approximations , 2000, IEEE Trans. Syst. Man Cybern. Part C.

[10]  Li Xu,et al.  Adaptive robust control of mechanical systems with non-linear dynamic friction compensation , 2008, Int. J. Control.

[11]  Huang Jin,et al.  Effect and compensation for servo systems using LuGre friction model , 2008 .

[12]  Li Xu,et al.  Adaptive robust precision motion control of linear motors with negligible electrical dynamics: theory and experiments , 2001 .

[13]  Pascal Bigras,et al.  A Multistage Position/Force Control for Constrained Robotic Systems With Friction: Joint-Space Decomposition, Linearization, and Multiobjective Observer/Controller Synthesis Using LMI Formalism , 2006, IEEE Transactions on Industrial Electronics.

[14]  R. Johansson,et al.  Friction compensation based on LuGre model , 2006, Proceedings of the 45th IEEE Conference on Decision and Control.

[15]  Li Xu,et al.  Adaptive robust control of mechanical systems with nonlinear dynamic friction compensation , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[16]  Pierre E. Dupont,et al.  Friction Modeling and PD Compensation at Very Low Velocities , 1995 .

[17]  Bin Yao,et al.  Adaptive robust control of linear motors with dynamic friction compensation using modified LuGre model , 2009, Autom..

[18]  I. Kanellakopoulos,et al.  Integral-Action Nonlinear Control of Induction Motors 1 , 1993 .

[19]  Carlos Canudas de Wit,et al.  A new model for control of systems with friction , 1995, IEEE Trans. Autom. Control..

[20]  Carlos Canudas de Wit,et al.  Adaptive friction compensation with partially known dynamic friction model , 1997 .

[21]  Li Xu,et al.  Adaptive robust precision motion control of linear motors with negligible electrical dynamics: theory and experiments , 2001, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).