Design of Length-Saving Multiway Wilkinson Power Dividers

A conventional multiway Wilkinson power divider must include transmission lines with a quarter of the wavelength. The prior miniaturized versions can further shorten the quarter-wave lines by adopting synthesized transmission lines, but the resulted shrunk operation bandwidth has not been considered as part of design. This paper introduces a method of designing the proposed length-saving multiway power divider to achieve targeted bandwidth performance with the minimum required total length. The proposed multiway power divider, including transmission lines with flexible lengths and additional matching capacitors, has the adjustable total length that can be set to the optimum value according to the generated plot mapping the corresponding bandwidths to the selected total lengths. The background principle, the theoretical analyses, and the design procedure of the proposed idea are addressed in detail. The design examples of the four-way, eight-way, and 32-way power dividers are provided. A 1-GHz eight-way power divider prototype based on the proposed design method is fabricated. The measurements, decently matching with simulations and the theoretical prediction, show an expected 51% operation bandwidth with the total length reduced to 72% of the conventional value.

[1]  Huei Wang,et al.  A Modified Wilkinson Power Divider With Isolation Bandwidth Improvement , 2012, IEEE Transactions on Microwave Theory and Techniques.

[2]  A. Abdipour,et al.  Compact Microstrip Wilkinson Power Dividers With Harmonic Suppression and Arbitrary Power Division Ratios , 2013, IEEE Transactions on Microwave Theory and Techniques.

[3]  Yu-Ta Chen,et al.  New Wilkinson Power Dividers and Their Integration Applications to Four-Way and Filtering Dividers , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[4]  S. Cohn.  A Class of Broadband Three-Port TEM-Mode Hybrids , 1968 .

[5]  Yongle Wu,et al.  Unequal dual-frequency Wilkinson power divider including series resistor-inductor-capacitor isolation structure , 2009 .

[6]  Jiafeng Zhou,et al.  General Design of Multiway Multisection Power Dividers by Interconnecting Two-Way Dividers , 2007, IEEE Transactions on Microwave Theory and Techniques.

[7]  Tadashi Kawai,et al.  Design method of lumped-element dual-band Wilkinson power dividers based on frequency transformation , 2010, 2010 Asia-Pacific Microwave Conference.

[8]  Xiaolong Wang,et al.  Wilkinson Power Divider With Complex Isolation Component and Its Miniaturization , 2014, IEEE Transactions on Microwave Theory and Techniques.

[9]  Wonseok Choe,et al.  $N$-Way Unequal Wilkinson Power Divider With Physical Output Port Separation , 2016, IEEE Microwave and Wireless Components Letters.

[10]  Dimitrios Peroulis,et al.  Reconfigurable Single/Multi-Band Filtering Power Divider Based on Quasi-Bandpass Sections , 2016, IEEE Microwave and Wireless Components Letters.

[11]  Renato G. Bosisio,et al.  Design of wideband six‐ and eight‐way Wilkinson planar power dividers using stepped impedance transformers , 2016 .

[12]  Ching-Wen Tang,et al.  Design of a Planar Dual-Band Power Divider With Arbitrary Power Division and a Wide Isolated Frequency Band , 2016, IEEE Transactions on Microwave Theory and Techniques.

[13]  Jun-Fa Mao,et al.  A Four-Way Microstrip Filtering Power Divider With Frequency-Dependent Couplings , 2015, IEEE Transactions on Microwave Theory and Techniques.

[14]  Jiafeng Zhou,et al.  Effects of interconnecting transmission lines on four‐way Wilkinson power divider , 2009 .

[15]  Tadashi Kawai,et al.  Wideband lumped-element Wilkinson power dividers using LC-ladder circuits , 2015, 2015 European Microwave Conference (EuMC).

[16]  Fan Zhang,et al.  Novel Four-Way Multilayer SIW Power Divider With Slot Coupling Structure , 2015, IEEE Microwave and Wireless Components Letters.

[17]  Yansheng Xu,et al.  Design of Multiway Power Divider by Using Stepped-Impedance Transformers , 2012, IEEE Transactions on Microwave Theory and Techniques.

[18]  R. Weigel,et al.  Compact 2–28 GHz planar multi-octave bandwidth Wilkinson power dividers , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[19]  Kai Xu,et al.  An Approach to 1-to- $2^{n}$ Way Microstrip Balanced Power Divider , 2016, IEEE Transactions on Microwave Theory and Techniques.

[20]  Yong-Xin Guo,et al.  Miniaturized Microstrip Wilkinson Power Divider With Harmonic Suppression , 2009, IEEE Microwave and Wireless Components Letters.

[21]  Aly E. Fathy,et al.  Design of a wideband eight-way single ridge substrate integrated waveguide power divider , 2014 .

[22]  Tianyu Zhang,et al.  A Compact Four-way Dual-band Power Divider Using Lumped Elements , 2015, IEEE Microwave and Wireless Components Letters.

[23]  G. Ponchak,et al.  Miniaturized Wilkinson power dividers utilizing capacitive loading , 2002, IEEE Microwave and Wireless Components Letters.

[24]  Zabih Ghassemlooy,et al.  Generalized Dual-Band Unequal Filtering Power Divider With Independently Controllable Bandwidth , 2017, IEEE Transactions on Microwave Theory and Techniques.

[25]  Kwok-Keung M Cheng,et al.  A Novel Power Divider Design With Enhanced Spurious Suppression and Simple Structure , 2010, IEEE Transactions on Microwave Theory and Techniques.

[26]  Yongle Wu,et al.  Analytical Design Method of Multiway Dual-Band Planar Power Dividers With Arbitrary Power Division , 2010, IEEE Transactions on Microwave Theory and Techniques.

[27]  H. Oraizi,et al.  Design and optimization of broadband asymmetrical multisection wilkinson power divider , 2006, IEEE Transactions on Microwave Theory and Techniques.

[28]  E. J. Wilkinson.  An N-Way Hybrid Power Divider , 1960 .

[29]  Xiaolong Wang,et al.  A Generalized Dual-Band Wilkinson Power Divider With Parallel $L, C,$ and $R$ Components , 2012, IEEE Transactions on Microwave Theory and Techniques.