Lightweight stiffened panels : mechanical characterization of emerging fabrication technologies

Tese de doutoramento. Engenharia Mecânica. Faculdade de Engenharia. Universidade do Porto. 2008

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  Herbert Wagner.  Structures of Thin Sheet Metal, Their Design and Construction , 1928 .

[3]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[4]  M. Holt.  Tests of Aluminum-alloy Stiffened-sheet Specimens Cut from an Airplane Wing , 1943 .

[5]  J. D. Eshelby.  The Continuum Theory of Lattice Defects , 1956 .

[6]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[7]  J. L. Sanders.  Effect of a stringer on the stress concentration due to a crack in a thin sheet , 1958 .

[8]  P. Paris.  A rational analytic theory of fatigue , 1961 .

[9]  M. K. Kassir,et al.  Three-Dimensional Stress Distribution Around an Elliptical Crack Under Arbitrary Loadings , 1966 .

[10]  John R. Rice,et al.  Mathematical analysis in the mechanics of fracture , 1968 .

[11]  G. C. Sih,et al.  The use of eigenfunction expansions in the general solution of three-dimensional crack problems , 1969 .

[12]  G. Sih,et al.  An approximate three-dimensional theory of plates with application to crack problems☆ , 1970 .

[13]  H. Vlieger,et al.  The residual strength characteristics of stiffened panels containing fatigue cracks , 1973 .

[14]  Satya N. Atluri,et al.  An assumed displacement hybrid finite element model for linear fracture mechanics , 1975 .

[15]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .

[16]  J. Benthem.  State of stress at the vertex of a quarter-infinite crack in a half-space , 1977 .

[17]  D. P. Wilhem,et al.  Influence of biaxial loading on analysis of cracked stiffened panels , 1979 .

[18]  Gary S. Schajer,et al.  Application of Finite Element Calculations to Residual Stress Measurements , 1981 .

[19]  Sergey V Shkarayev,et al.  Edge cracks in stiffened plates , 1987 .

[20]  Jian Lu,et al.  Measurement of residual-stress distribution by the incremental hole-drilling method , 1985 .

[21]  David M. Parks,et al.  Three-dimensional stress field near the crack front of a thin elastic plate , 1988 .

[22]  W. Zhu.  Singular stress field of three-dimensional crack , 1990 .

[23]  Kunigal N. Shivakumar,et al.  Treatment of singularities in cracked bodies , 1990 .

[24]  A. Blom,et al.  On the Semi-Elliptical Surface Crack Problem: Detailed Numerical Solutions for Complete Elastic Stress Fields , 1990 .

[25]  Ji-Liang Doong,et al.  Infrared temperature sensing of laser welding , 1991 .

[26]  M. Utukuri,et al.  Stress intensity factors for a crack near finite boundaries in multiply stiffened sheets , 1991 .

[27]  S. Suresh.  Fatigue of materials , 1991 .

[28]  J. Bokor,et al.  Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask , 1993 .

[29]  N. Dowling.  Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue , 1993 .

[30]  L. C. Davis,et al.  Residual stresses and their effects on deformation , 1993, Metallurgical and Materials Transactions A.

[31]  Øystein Grong,et al.  Metallurgical modelling of welding , 1994 .

[32]  H. Wern,et al.  Measurement of non-uniform residual stresses using the hole drilling method, a new integral formalism , 1995 .

[33]  P. C. Wang.  Fracture mechanics parameter for the fatigue resistance of laser welds , 1995 .

[34]  M. Aliabadi,et al.  The application of the dual boundary element method to the analysis of cracked stiffened panels , 1996 .

[35]  Murray W. Mahoney,et al.  Effects of friction stir welding on microstructure of 7075 aluminum , 1997 .

[36]  K. Behler,et al.  Laser beam welding of low weight materials and structures , 1997 .

[37]  Zhang Li,et al.  Laser welding techniques for titanium alloy sheet , 1997 .

[38]  R. Galatolo,et al.  Fatigue crack propagation in residual stress fields of welded plates , 1997 .

[39]  J. Onõro,et al.  Fatigue behaviour of laser welds of high-strength low-alloy steels , 1997 .

[40]  Lawrence E Murr,et al.  Microstructural aspects of the friction-stir welding of 6061-T6 aluminum , 1997 .

[41]  M. H. Davies,et al.  The prediction of the temperature distribution and weld pool geometry in the gas metal arc welding process , 1998 .

[42]  Lawrence E Murr,et al.  Microstructural issues in a friction-stir-welded aluminum alloy , 1998 .

[43]  G. Toselli,et al.  Transient finite element analysis of deep penetration laser welding process in a singlepass butt-welded thick steel plate , 1999 .

[44]  S. Fawzi,et al.  Influence of electrical Field on Pulsed Laser beam welding of Stainless Steel (304) , 1999 .

[45]  V. Hauk.  STRUCTURAL AND RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION ON POLYMERIC MATERIALS AND COMPOSITES , 1999 .

[46]  Stephan Kallee,et al.  Friction and Forge Welding Processes for the Automotive Industry , 1999 .

[47]  L. Murr,et al.  Low-Temperature Friction-Stir Welding of 2024 Aluminum , 1999 .

[48]  D. A. Scott,et al.  Finite element model of pulsed laser welding , 1999 .

[49]  J. Ion,et al.  Laser beam welding of wrought aluminium alloys , 2000 .

[50]  S. L. Semiatin,et al.  Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys , 2000 .

[51]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[52]  G. Biallas,et al.  Monotonic and Cyclic Strength of Friction Stir Welded Aluminium Joints , 2000 .

[53]  Duncan P. Hand,et al.  Optical focus control system for laser welding and direct casting , 2000 .

[54]  L. Svensson,et al.  Microstructure and mechanical properties of friction stir welded aluminium alloys with special reference to AA 5083 and AA 6082 , 2000 .

[55]  C. Donne,et al.  Laser beam welding and friction stir welding of 6013‐T6 aluminium alloy sheet , 2000 .

[56]  A. Mahrle,et al.  Comparison of experimental determined and numerical simulated temperature fields for quality assurance at laser beam welding of steels and aluminium alloyings , 2000 .

[57]  C. Sun,et al.  Characteristics of three-dimensional stress fields in plates with a through-the-thickness crack , 2000 .

[58]  Tarasankar DebRoy,et al.  Pore formation during laser beam welding of die-cast magnesium alloy AM60B: Mechanism and remedy controlled remelting of the fusion zone led to removal of gas bubbles, reducing porosity , 2001 .

[59]  E. Schubert,et al.  Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry , 2001 .

[60]  C. Dalle Donne,et al.  Investigations on Residual Stresses in Friction Stir Welds , 2001 .

[61]  Magnus Langseth,et al.  Stiffened aluminium panels subjected to axial compression , 2001 .

[62]  P. V. BY L. QUINTINO,et al.  Laser Beam Welding of Automobile Hinges , 2001 .

[63]  G. Oertelt,et al.  Effect of Thermal Cycling on Friction Stir Welds of 2195 Aluminum Alloy , 2001 .

[64]  H. Bhadeshia,et al.  Residual stress. Part 2 – Nature and origins , 2001 .

[65]  M. Prime.  Cross-sectional mapping of residual stresses by measuring the surface contour after a cut , 2001 .

[66]  Achim Mahrle,et al.  The influence of fluid flow phenomena on the laser beam welding process , 2002 .

[67]  P. Prevéy,et al.  Improving Corrosion Fatigue Performance of AA2219 Friction Stir Welds with Low Plasticity Burnishing , 2002 .

[68]  Patrick Ulysse,et al.  Three-dimensional modeling of the friction stir-welding process , 2002 .

[69]  R. J. Dexter,et al.  Crack propagation in welded stiffened panels , 2002 .

[70]  A. Wu,et al.  Microstructures and mechanical properties of Ti–24Al–17Nb (at.%) laser beam welding joints , 2002 .

[71]  Stewart Williams,et al.  Residual stresses in friction stir welded Al sheets , 2002 .

[72]  Robert L. Taylor,et al.  Microstructural studies of friction stir welds in 2024-T3 aluminum , 2002 .

[73]  S. Na,et al.  A study on the prediction of the laser weld shape with varying heat source equations and the thermal distortion of a small structure in micro-joining ☆ , 2002 .

[74]  G. Mathers.  The welding of aluminium and its alloys , 2002 .

[75]  T. Muroga,et al.  Metallurgical and mechanical properties of laser weldment for low activation V–4Cr–4Ti alloy , 2002 .

[76]  James C. Newman,et al.  Residual strength analyses of stiffened and unstiffened panels. Part II: wide panels , 2003 .

[77]  L. W. Tsay,et al.  Tensile properties of LBW welds in Ti–6Al–4V alloy at evaluated temperatures below 450 °C , 2003 .

[78]  Radovan Kovacevic,et al.  Finite element modeling of friction stir welding—thermal and thermomechanical analysis , 2003 .

[79]  Hugh Shercliff,et al.  Heat flow into friction stir welding tools , 2003 .

[80]  Michael A. Sutton,et al.  Mode I fracture and microstructure for 2024-T3 friction stir welds , 2003 .

[81]  Alfredo Güemes,et al.  Optical fibre sensors for monitoring of welding residual stresses , 2003 .

[82]  Michael A. Sutton,et al.  Mixed mode I/II fracture of 2024-T3 friction stir welds , 2003 .

[83]  P. Prevéy,et al.  Improved Fatigue Performance of Friction Stir Welds with Low Plasticity Burnishing: Residual Stress Design and Fatigue Performance Assessment , 2003 .

[84]  K. Sadananda,et al.  Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys , 2003 .

[85]  Phil E. Irving,et al.  The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints , 2003 .

[86]  Cetin Morris Sonsino,et al.  Fatigue assessment of laser welded thin sheet aluminium , 2003 .

[87]  Hussam Mahmoud,et al.  Analysis of crack propagation in welded stiffened panels , 2003 .

[88]  Hidetoshi Fujii,et al.  Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy , 2003 .

[89]  A. Costa,et al.  Laser beam welding hard metals to steel , 2003 .

[90]  Radovan Kovacevic,et al.  Thermal modeling of friction stir welding in a moving coordinate system and its validation , 2003 .

[91]  W. Thomas.  Friction Stir Welding - Recent Developments , 2003 .

[92]  M. Aliabadi,et al.  Fracture mechanics analysis of curved stiffened panels using BEM , 2003 .

[93]  Radovan Kovacevic,et al.  Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum , 2003 .

[94]  B. B. Grimmett,et al.  Friction stir welding studies on mild steel , 2003 .

[95]  Mats Ericsson,et al.  Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG , 2003 .

[96]  G. Verhaeghe,et al.  Achieving Low-Porosity Laser Welds in Aerospace Aluminium Alloy , 2003 .

[97]  Hugh Shercliff,et al.  A WELD MARKER TECHNIQUE FOR FLOW VISUALIZATION IN FRICTION STIR WELDING , 2003 .

[98]  S. Jung,et al.  The mechanical properties related to the dominant microstructure in the weld zone of dissimilar formed Al alloy joints by friction stir welding , 2003 .

[99]  P. Peyre,et al.  Reduction of porosity content generated during Nd:YAG laser welding of A356 and AA5083 aluminium alloys , 2003 .

[100]  W. Brocks,et al.  Numerical simulation of crack extension in aluminium welds , 2003 .

[101]  Seung-Boo Jung,et al.  The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials , 2003 .

[102]  T. Dickerson,et al.  Fatigue of friction stir welds in aluminium alloys that contain root flaws , 2003 .

[103]  Michael A. Sutton,et al.  Banded Microstructure in AA2024-T351 and AA2524-T351 Aluminum Friction Stir Welds: Part I. Metallurgical Studies , 2004 .

[104]  F. Caiazzo,et al.  Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterization , 2004 .

[105]  Giovanni Maria Carlomagno,et al.  REVIEW ARICLE: Recent advances in the use of infrared thermography , 2004 .

[106]  G. Haidemenopoulos,et al.  Aluminum and Aluminum Alloys , 2004 .

[107]  Fukuhisa Matsuda,et al.  Relationship between weld quality and optical emissions in underwater Nd: YAG laser welding , 2004 .

[108]  Yutaka S. Sato,et al.  Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding , 2004 .

[109]  P.M.S.T. de Castro,et al.  Dual boundary element analysis of cracked plates: post-processing implementation of the singularity subtraction technique , 2004 .

[110]  Lunji Hu,et al.  A study on the metal flow in full penetration laser beam welding for titanium alloy , 2004 .

[111]  R. M. Leal,et al.  Defects Formation in Friction Stir Welding of Aluminium Alloys , 2004 .

[112]  Yuh J. Chao,et al.  Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel , 2004 .

[113]  Cheng Liu,et al.  Tensile fracture behavior in CO2 laser beam welds of 7075-T6 aluminum alloy , 2004 .

[114]  Hussam Mahmoud,et al.  Propagation rate of large cracks in stiffened panels under tension loading , 2005 .

[115]  Mark Price,et al.  The computational post-buckling analysis of fuselage stiffened panels loaded in shear , 2005 .

[116]  J. T. Chen,et al.  The finite element simulation of the friction stir welding process , 2005 .

[117]  I. Sinclair,et al.  An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures , 2006 .

[118]  Zhili Feng,et al.  Texture analysis of a friction stir processed 6061-T6 aluminum alloy using neutron diffraction , 2006 .

[119]  K. Drechsler,et al.  Investigation of fatigue crack growth and crack turning on integral stiffened structures under mode I loading , 2006 .

[120]  Pierluigi Mollicone,et al.  Alternative simulation techniques for distortion of thin plate due to fillet-welded stiffeners , 2006 .

[121]  Sangshik Kim,et al.  Fatigue crack propagation behavior of friction stir welded Al–Mg–Si alloy , 2006 .

[122]  Philip J. Withers,et al.  Dissimilar friction stir welds in AA5083-AA6082: The effect of process parameters on residual stress , 2006 .

[123]  William J. Arbegast,et al.  Friction stir welding after a decade of development , 2006 .

[124]  Livan Fratini,et al.  An analysis of through-thickness residual stresses in aluminium FSW butt joints , 2006 .

[125]  Antonino Squillace,et al.  Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir welding , 2006 .

[126]  Ji-Ho Song,et al.  Estimation methods for strain-life fatigue properties from hardness , 2006 .

[127]  P. V. Venkitakrishnan,et al.  An assessment of stresses in thin walled welded tubes through hole drilling and sectioning methods , 2007 .

[128]  P. Moreira,et al.  An overview on fatigue analysis of aeronautical structural details: Open hole, single rivet lap-joint, and lap-joint panel , 2007 .

[129]  Nagesh R. Iyer,et al.  Remaining life prediction of cracked stiffened panels under constant and variable amplitude loading , 2007 .

[130]  A. Brot,et al.  THE DAMAGE-TOLERANCE BEHAVIOR OF INTEGRALLY STIFFENED METALLIC STRUCTURES , 2008 .

[131]  R. Miranda,et al.  Process Developments and Materials Characterization in FSW/P , 2022 .

[132]  Standard Test Methods for Tension Testing of Metallic Materials 1 , 2022 .