Foil-to-foil lamination and electrical interconnection of printed components on flexible substrates

This paper describes and compares two integration methods to structurally laminate and interconnect foil-based components with flexible polymeric substrates. The first method uses isotropic conductive adhesives (ICA) confined in laser-ablated through foil vias (TFV), while the second one uses an anisotropic conductive adhesive (ACA). Both procedures were successfully demonstrated by interconnecting silver-based inkjet printed and gold-sputtered interdigitated capacitive humidity sensors onto flexible PEN carrier substrates, showing functionality, high process yield and low-complexity. The robustness of the assemblies was tested and compared for adhesion, bending, high humidity and temperature cycling. Confined ICA vias show higher mechanical robustness to bending, while both methods remained functional after more than 900h of environmental ageing. Finally, the interconnections were fully validated at different levels of relative humidity (RH) by comparing the sensor response to that of a commercial sensor.

[1]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[2]  Francisco Molina-Lopez,et al.  All additive inkjet printed humidity sensors on plastic substrate , 2012 .

[3]  N. Bârsan,et al.  Making environmental sensors on plastic foil , 2011 .

[4]  I. Papautsky,et al.  Polymer flip-chip bonding of pressure sensors on a flexible Kapton film for neonatal catheters , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[5]  David J. Williams,et al.  Anisotropic conducting adhesives for electronic assembly , 1997 .

[6]  Tianhong Cui,et al.  Fabrication of polymer via holes by a combination of hot embossing and indentation processes , 2011 .

[7]  Laura Frisk,et al.  Effects of Cycling Humidity on the Performance of RFID Tags With ACA Joints , 2012, IEEE Transactions on Reliability.

[8]  F. P. Wieringa,et al.  Systems in Foil — Opening new Perspectives in Medical Technology , 2009 .

[9]  Percolation constraints in the use of conductor-filled polymers for interconnects , 1992, 1992 Proceedings 42nd Electronic Components & Technology Conference.

[10]  Andrés Vásquez Quintero,et al.  Effect of low‐temperature processing on dry film photoresist properties for flexible electronics , 2013 .

[11]  Yung-Ming Cheng,et al.  Fabrication and Characterization of a Three-Dimensional Flexible Thermopile , 2008 .

[12]  Hon Tat Hui,et al.  Fabrication of wireless sensors on flexible film using screen printing and via filling , 2011, DTIP 2011.

[13]  Xitao Wang,et al.  Quantitative estimate of the characteristics of conductive particles in ACA by using nano indenter , 1997 .

[14]  Andrea Scorzoni,et al.  Flexible tag microlab development: Gas sensors integration in RFID flexible tags for food logistic , 2007 .

[15]  Y. C. Chan,et al.  Adhesion strength and contact resistance of flip chip on flex packages--effect of curing degree of anisotropic conductive film , 2004, Microelectron. Reliab..

[16]  Roel Kusters,et al.  Flipchip bonding of ultrahin Si dies onto PEN/PET substrates with low cost circuitry , 2010, 3rd Electronics System Integration Technology Conference ESTC.

[17]  Frank G. Shi,et al.  Electrical conduction of anisotropic conductive adhesives: effect of size distribution of conducting filler particles , 1999 .

[18]  T. Unander,et al.  System Integration of Electronic Functions in Smart Packaging Applications , 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[19]  Chao-Ming Lin,et al.  The prediction of failure probability in anisotropic conductive adhesive (ACA) , 2005 .

[20]  Li Yang,et al.  RFID Tag and RF Structures on a Paper Substrate Using Inkjet-Printing Technology , 2007, IEEE Transactions on Microwave Theory and Techniques.

[21]  Li Yang,et al.  Inkjet Printed, Self Powered, Wireless Sensors for Environmental, Gas, and Authentication-Based Sensing , 2011, IEEE Sensors Journal.

[22]  Andreas Dietzel,et al.  Systems-in-foil - Devices, fabrication processes and reliability issues , 2008, Microelectron. Reliab..

[23]  M. Cauwe,et al.  Novel interconnect methodologies for ultra-thin chips on foils , 2012, 2012 IEEE 62nd Electronic Components and Technology Conference.

[24]  Eveliina Koski,et al.  Inkjet-printed passive UHF RFID tags: review and performance evaluation , 2012 .

[25]  Marco Barink,et al.  Novel lamination and interconnection technologies demonstrated in a flexible modular optical sensor array for wound monitoring , 2010 .

[26]  Zhenan Bao,et al.  Fabrication of low-cost electronic biosensors , 2009 .

[27]  S.J. Hu,et al.  A Multiple Particle Model for the Prediction of Electrical Contact Resistance in Anisotropic Conductive Adhesive Assemblies , 2007, IEEE Transactions on Components and Packaging Technologies.