Evaluation of the dual-feed rotor spinning unit based on airflow dynamics and blended yarn properties

Abstract In fiber processing on a rotor spinning machine, the fiber orientation gained in pre-processing stages like carding and drawing is mainly lost as the fibers enter the rotor interior for further processing. To improve fiber orientation and facilitate fiber blending, a new dual-feed rotor spinning unit is proposed. We present a comprehensive numerical evaluation of the airflow dynamics in the original and the proposed rotor spinning unit based on finite volume methods. The velocity profiles, pressure distribution, vortices, streamlines, and drag force in the two prototypes are evaluated. Results reveal that the velocity magnitude and pressure in the dual-feed unit adopt an even pattern and the total drag force reduction of up to 60–80% is achieved. Comparison of the yarn quality properties of the two systems showed that the dual-feed spun yarns possess superior quality compared to the conventional yarns.

[1]  Lingxue Kong,et al.  Fibre transportation in confined channel with recirculations , 2000 .

[2]  Ali Peyravi,et al.  Dual-feed rotor spinning of cotton fiber: trash separation and yarn properties , 2014 .

[3]  Jun Wang,et al.  Rotor spinning transfer channel design optimization via computational fluid dynamics , 2018 .

[4]  Albert Gilmutdinov,et al.  Three dimensional modeling of air flow, aerosol distribution and aerosol samplers for unsteady conditions. , 2008, Journal of environmental monitoring : JEM.

[5]  Yi Zhang,et al.  Research on flow in 90° curved duct with round section , 2012 .

[6]  Jun Wang,et al.  Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box , 2018 .

[7]  Wolfgang Rodi,et al.  Prediction of free shear flows: A comparison of the performance of six turbulence models , 1972 .

[8]  C. W. Yu,et al.  Numerical study of the function of the slotting-tube in air-jet spinning , 2010 .

[9]  Sumanta Acharya,et al.  Two-Equation Turbulence Modeling for Impeller Stirred Tanks , 2001 .

[10]  R. A. Platfoot,et al.  Two-Dimensional Simulation of Air Flow in the Transfer Channel of Open-End Rotor Spinning Machines , 1996 .

[11]  R. Alagirusamy,et al.  Fundamental principles of open end yarn spinning , 2010 .

[12]  Trevor T. Robinson,et al.  Defining Simulation Intent , 2011, Comput. Aided Des..

[13]  Safdar Eskandarnejad,et al.  Effect of two separate fibre feed systems in rotor spinning on yarn properties , 2007 .

[14]  Rotor spinning transfer channel design optimization via CFD , 2017 .

[15]  Nhan Phan-Thien,et al.  Simulation of fibre suspension flow with shear-induced migration , 2000 .

[16]  Jun Wang,et al.  Computational simulation of air flow in the rotor spinning unit , 2016 .

[17]  Nallamuthu Rajaratnam,et al.  Turbulence Characteristics in a Rock-Ramp-Type Fish Pass , 2015 .

[18]  R. A. Platfoot,et al.  Computational Two-Phase Air/Fiber Flow Within Transfer Channels of Rotor Spinning Machines , 1997 .

[19]  William Oxenham,et al.  Computer Modeling of Fiber Movements in High-Speed Airflow , 2005 .

[20]  Klaus-Jürgen Bathe,et al.  Finite element analysis of incompressible and compressible fluid flows with free surfaces and structural interactions , 1995 .

[21]  L. Biferale,et al.  Lagrangian structure functions in turbulence : a quantitative comparison between experiment and direct numerical simulation , 2007, 0708.0311.

[22]  Qingyan Chen,et al.  Assessment of various CFD models for predicting airflow and pressure drop through pleated filter system , 2014 .

[23]  Liang Chen,et al.  Numerical simulation of the internal flow field of a new main nozzle in an air-jet loom based on Fluent , 2015 .