A Generalized Mesh-Based Thermal Network Model for SPM Machines Combining Coupled Winding Solution
暂无分享,去创建一个
Linsen Huang | Wenxiang Zhao | Tong Liu | Jinghua Ji | Donghui Cao | Wenxiang Zhao | J. Ji | Linsen Huang | Donghui Cao | Tong Liu
[1] Ronghai Qu,et al. A Dynamic Multilayer Winding Thermal Model for Electrical Machines With Concentrated Windings , 2019, IEEE Transactions on Industrial Electronics.
[2] Luca Papini,et al. Analytical Thermal Model for Fast Stator Winding Temperature Prediction , 2017, IEEE Transactions on Industrial Electronics.
[3] Marco Cossale,et al. Electrical Machines Thermal Model: Advanced Calibration Techniques , 2019, IEEE Transactions on Industry Applications.
[4] Guohai Liu,et al. A Novel Spoke-Type PM Motor With Auxiliary Salient Poles for Low Torque Pulsation , 2020, IEEE Transactions on Industrial Electronics.
[5] Guohai Liu,et al. Modular Reluctance Network Simulation of a Linear Permanent-Magnet Vernier Machine Using New Mesh Generation Methods , 2017, IEEE Transactions on Industrial Electronics.
[6] Enrico Carpaneto,et al. Stator-Winding Thermal Models for Short-Time Thermal Transients: Definition and Validation , 2016, IEEE Transactions on Industrial Electronics.
[7] F. Bellina,et al. A Lumped Network Approach to a Coupled Electromagnetic-Thermal Analysis of Cable-in-Conduit Conductors , 2017, IEEE Transactions on Applied Superconductivity.
[8] Rafal Wrobel,et al. Estimation of Equivalent Thermal Parameters of Impregnated Electrical Windings , 2013, IEEE Transactions on Industry Applications.
[9] David A. Lowther,et al. Comparison of Different Demagnetization Models of Permanent Magnet in Machines for Electric Vehicle Application , 2016, IEEE Transactions on Magnetics.
[10] Thomas M. Jahns,et al. Analytical Modeling of Interturn Short Circuit for Multiphase Fault-Tolerant PM Machines With Fractional Slot Concentrated Windings , 2017, IEEE Transactions on Industry Applications.
[11] Charles R. Sullivan,et al. Thermal Modeling of Inductor and Transformer Windings Including Litz Wire , 2020, IEEE Transactions on Power Electronics.
[12] A. Boglietti,et al. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors , 2005, IEEE Transactions on Energy Conversion.
[13] Michael Jaritz,et al. General Analytical Model for the Thermal Resistance of Windings Made of Solid or Litz Wire , 2019, IEEE Transactions on Power Electronics.
[14] Qingxin Yang,et al. Eddy Current Loss Effect in Foil Winding of Transformer Based on Magneto-Fluid-Thermal Simulation , 2019, IEEE Transactions on Magnetics.
[15] Jianguo Zhu,et al. Double-Circulatory Thermal Analyses of a Water-Cooled Permanent Magnet Motor Based on a Modified Model , 2018, IEEE Transactions on Magnetics.
[16] Ronghai Qu,et al. Ventilation and Thermal Improvement of Radial Forced Air-Cooled FSCW Permanent Magnet Synchronous Wind Generators , 2017, IEEE Transactions on Industry Applications.
[17] M. Cheng,et al. Direct Coupling Method for Coupled Field-Circuit Thermal Model of Electrical Machines , 2018, IEEE Transactions on Energy Conversion.
[18] Li Quan,et al. Temperature Rise Calculation of a Flux-Switching Permanent-Magnet Double-Rotor Machine Using Electromagnetic-Thermal Coupling Analysis , 2018, IEEE Transactions on Magnetics.
[19] Iñigo Kortabarria,et al. PM-Assisted Synchronous Reluctance Machine Flux Weakening Control for EV and HEV Applications , 2018, IEEE Transactions on Industrial Electronics.
[20] Jinghua Ji,et al. A Generalized Equivalent Magnetic Network Modeling Method for Vehicular Dual-Permanent-Magnet Vernier Machines , 2019, IEEE Transactions on Energy Conversion.
[21] Wenxiang Zhao,et al. Analysis of PM Eddy Current Loss in Four-Phase Fault-Tolerant Flux-Switching Permanent-Magnet Machines by Air-Gap Magnetic Field Modulation Theory , 2020, IEEE Transactions on Industrial Electronics.
[22] Z. Zhu,et al. A New Iron Loss Model for Temperature Dependencies of Hysteresis and Eddy Current Losses in Electrical Machines , 2018, IEEE Transactions on Magnetics.
[23] Dengxu Zhang,et al. Thermal Identification, Model, and Experimental Validation of a Toroidally Wound Mover Linear-Switched Reluctance Machine , 2018, IEEE Transactions on Magnetics.
[24] Shuang Zhao,et al. Thermal Analysis of a PMaSRM Using Partial FEA and Lumped Parameter Modeling , 2012, IEEE Transactions on Energy Conversion.
[25] Ming Cheng,et al. Thermal Modeling of Flux-Switching Permanent-Magnet Machines Considering Anisotropic Conductivity and Thermal Contact Resistance , 2016, IEEE Transactions on Industrial Electronics.
[26] Martin P. Foster,et al. Combined Multiphysics Model of Switched Flux PM Machines Under Fault Operations , 2019, IEEE Transactions on Industrial Electronics.
[27] Andries Johannes Grobler,et al. Empirical Parameter Identification for a Hybrid Thermal Model of a High-Speed Permanent Magnet Synchronous Machine , 2018, IEEE Transactions on Industrial Electronics.
[28] Joachim Bocker,et al. Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors , 2016, IEEE Transactions on Energy Conversion.
[29] Li Yu,et al. Efficiency Improvement and Thermal Analysis of a Totally Enclosed Self-Cooling Doubly Salient Generator With Optimized Stator Yoke , 2016, IEEE Transactions on Magnetics.
[30] George van Schoor,et al. A Two-Dimensional Analytic Thermal Model for a High-Speed PMSM Magnet , 2015, IEEE Transactions on Industrial Electronics.
[31] Wenxiang Zhao,et al. Design Considerations of Fault-Tolerant Permanent Magnet Vernier Machine , 2020, IEEE Transactions on Industrial Electronics.
[32] Fengge Zhang,et al. A Novel Thermal Network Model Used for Temperature Calculation and Analysis on Brushless Doubly-Fed Generator With Winding Encapsulating Structure , 2019, IEEE Transactions on Industry Applications.
[33] Enrico Carpaneto,et al. Stator winding thermal conductivity evaluation: An industrial production assessment , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).
[34] Narayan C. Kar,et al. Analysis of End-Winding Thermal Effects in a Totally Enclosed Fan-Cooled Induction Motor With a Die Cast Copper Rotor , 2017, IEEE Transactions on Industry Applications.