Fixture Layout Optimization for Large Metal Sheets Using Genetic Algorithm

The geometric errors in the manufacturing process can be reduced by optimal positioning of the fixture elements in the fixture to make the workpiece stiff. We propose a new fixture layout optimization method N-3-2-1 for large metal sheets in this paper that combines the genetic algorithm and finite element analysis. The objective function in this method is to minimize the sum of the nodal deflection normal to the surface of the workpiece. Two different kinds of case studies are presented, and optimal position of the fixturing element is obtained for different cases. Keywords—Fixture layout, optimization, fixturing element, genetic algorithm.

[1]  Frank W. Liou,et al.  Fixture analysis under dynamic machining , 1997 .

[2]  Y.J.Gene Liao,et al.  Flexible multibody dynamics based fixture-workpiece analysis model for fixturing stability , 2000 .

[3]  Bing Li,et al.  Principle and Simulation of Fixture Configuration Design for Sheet Metal Assembly with Laser Welding, Part 2: Optimal Configuration Design with Genetic Algorithm , 2001 .

[4]  Warren R. DeVries,et al.  Optimization Methods Applied to Selecting Support Positions in Fixture Design , 1991 .

[5]  UTPAL ROY,et al.  Geometric reasoning for re-allocation of supporting and clamping positions in the automated fixture design system , 1999 .

[6]  Jie Ma,et al.  Compliant fixture layout design using topology optimization method , 2011, 2011 IEEE International Conference on Robotics and Automation.

[7]  Andrew Y. C. Nee,et al.  A computational geometry approach to optimum clamping synthesis of machining fixtures , 1999 .

[8]  张开富,et al.  Optimization method of fixture layout for aeronautical thin-walled structures with automated riveting , 2012 .

[9]  Shreyes N. Melkote,et al.  Optimal Fixture Design Accounting for the Effect of Workpiece Dynamics , 2001 .

[10]  Joseph J. Rencis,et al.  Development of a Finite Element Analysis Tool for Fixture Design Integrity Verification and Optimization , 2002 .

[11]  Bing Li,et al.  Fixture Configuration Design for Sheet Metal Assembly with Laser Welding: A Case Study , 2002 .

[12]  Shreyes N. Melkote,et al.  Improved workpiece location accuracy through fixture layout optimization , 1999 .

[13]  Jingxia Yuan,et al.  Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations , 1996 .

[14]  Andrew Y. C. Nee,et al.  Modeling, analysis, and verification of optimal fixturing design , 2004, IEEE Transactions on Automation Science and Engineering.

[15]  W Cai,et al.  Fixture optimization for sheet panel assembly considering welding gun variations , 2008 .

[16]  K. P. Padmanaban,et al.  Machining fixture layout optimization using FEM and evolutionary techniques , 2007 .