A review of finite element analysis of adhesively bonded joints

[1]  R. P. SHELDON,et al.  Adhesion and Adhesives , 1966, Nature.

[2]  Robert D. Adams,et al.  Stress analysis of adhesive-bonded lap joints , 1974 .

[3]  Robert D. Adams,et al.  Stress Analysis of Adhesive Bonded Tubular Lap Joints , 1977 .

[4]  Anthony J. Kinloch,et al.  Developments in adhesives , 1977 .

[5]  Robert D. Adams,et al.  Stress analysis of axisymmetric butt joints loaded in torsion and tension , 1978 .

[6]  Robert D. Adams,et al.  An Elasto-Plastic Investigation of the Peel Test , 1982 .

[7]  J. Harris,et al.  Strength prediction of bonded single lap joints by non-linear finite element methods , 1984 .

[8]  V. M. Malhotra,et al.  Structural adhesive joints in engineering , 1986 .

[9]  Robert D. Adams,et al.  The influence of local geometry on the strength of adhesive joints , 1987 .

[10]  Adhesives in civil engineering , 1993 .

[11]  Jaroslav Mackerle.  BIBLIOGRAPHY: Finite element analysis and simulation of adhesive bonding, soldering and brazing: A bibliography (1976 - 1996) , 1997 .

[12]  S. O. Oyadiji,et al.  Influence of adhesive characteristics on the transverse free vibration of single lap-jointed cantilevered beams , 2001 .

[13]  Jaroslav Mackerle,et al.  Finite element analysis and simulation of adhesive bonding, soldering and brazing—an addendum: a bibliography (1996–2002) , 2002 .

[14]  A. Al-Samhan,et al.  Thermal stresses developed in weld-bonded joints , 2004 .

[15]  A. Al-Samhan,et al.  Design rationale of weld-bonded joints , 2004 .

[16]  A. Al-Samhan,et al.  Peel and shear strength of spot-welded and weld-bonded dissimilar thickness joints , 2004 .

[17]  A. Baldan.  Adhesively-bonded joints in metallic alloys, polymers and composite materials: Mechanical and environmental durability performance , 2004 .

[18]  Saied Darwish,et al.  Analysis of weld-bonded dissimilar materials , 2004 .

[19]  L. F. Silva,et al.  Manufacture of adhesive joints and bulk specimens with high-temperature adhesives , 2004 .

[20]  A. Beukers,et al.  Experimental verification of a stress singularity model to predict the effect of bondline thickness on joint strength , 2004 .

[21]  Fehim Findik,et al.  Effects of various parameters on dynamic characteristics in adhesively bonded joints , 2004 .

[22]  A. Baldan.  Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatment , 2004 .

[23]  Hyonny Kim,et al.  Mechanisms of Damage Formation in Transversely Impacted Glass-Epoxy Bonded Lap Joints , 2005 .

[24]  Shangdong Tu,et al.  Creep Stress Redistribution of Single-Lap Weldbonded Joint , 2005 .

[25]  M. Heller,et al.  Theoretical and experimental research into optimal edge taper of bonded repair patches subject to fatigue loadings , 2005 .

[26]  M. Iwasa.  Study on the Strength of GFRP/Stainless Steel Adhesive Joints Reinforced with Glass Mat , 2005 .

[27]  José Costa,et al.  Stress analysis of lap joints involving natural fibre reinforced interface layers , 2005 .

[28]  Magd Abdel Wahab,et al.  Predicting the residual strength for environmentally degraded adhesive lap joints , 2006 .

[29]  Seung-Hwan Chang,et al.  Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures , 2006 .

[30]  M. Apalak.  Elastic stresses in an adhesively-bonded functionally-graded tubular single-lap joint in tension , 2006 .

[31]  I. Ashcroft,et al.  Modelling Environmental Degradation in EA9321-Bonded Joints using a Progressive Damage Failure Model , 2006 .

[32]  M.F.S.F. de Moura,et al.  Simulation of mechanical behaviour of composite bonded joints containing strip defects , 2006 .

[33]  R. Adams,et al.  Stress-free temperature in a mixed-adhesive joint , 2006 .

[34]  Marino Quaresimin,et al.  Stress intensity factors and strain energy release rates in single lap bonded joints in composite materials , 2006 .

[35]  J. Chousal,et al.  Effect of Adhesive Type and Thickness on the Lap Shear Strength , 2006 .

[36]  Ivan Bartoli,et al.  Modeling wave propagation in damped waveguides of arbitrary cross-section , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[37]  G. Kelly,et al.  Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints , 2006 .

[38]  J. G. Williams,et al.  A numerical analysis of the elastic-plastic peel test , 2006 .

[39]  G. M. Swallowe,et al.  Numerical and experimental investigation of three-dimensional strains in adhesively bonded joints , 2006 .

[40]  R. Gunes,et al.  Thermal residual stresses in an adhesively-bonded functionally graded single-lap joint , 2006 .

[41]  Erdogan Madenci,et al.  Influence of adhesive spew in bonded single-lap joints , 2006 .

[42]  G. Buckner,et al.  Vibration Analysis for Damage Detection in Metal-to-Metal Adhesive Joints , 2006 .

[43]  Piyush K. Dutta,et al.  Experimental–numerical studies of transverse impact response of adhesively bonded lap joints in composite structures , 2006 .

[44]  I. Ashcroft,et al.  Modelling the Environmental Degradation of the Interface in Adhesively Bonded Joints using a Cohesive Zone Approach , 2006 .

[45]  Farid Taheri,et al.  An Engineering Approach for Design and Analysis of Metallic Pipe Joints Under Torsion by the Finite Element Method , 2006 .

[46]  Hyonny Kim.  Closed form solution for strain energy release rate distribution in debonded one-edge free postbuckled composite flanged joints , 2006 .

[47]  An Evaluation of Interface Strength at a Vertex in a Three-Dimensional Joint Considering Residual Thermal Stresses Using Three Dimensional Boundary Element Method , 2006 .

[48]  M. Apalak,et al.  Optimal design of an adhesively-bonded corner joint with single support based on the free vibration analysis , 2006 .

[49]  M. Apalak,et al.  Thermal residual stresses in an adhesively bonded functionally graded tubular single lap joint , 2007 .

[50]  Min You,et al.  Three-dimensional stress analysis of adhesive-bonded joints under cleavage loading , 2007 .

[51]  Ulf Stigh,et al.  An explicit FE-model of impact fracture in an adhesive joint , 2007 .

[52]  F. Taheri,et al.  A simple approach for characterizing the performance of metallic tubular adhesively-bonded joints under torsion loading , 2007 .

[53]  M. D. de Moura,et al.  Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model , 2007 .

[54]  Hideaki Nakayama,et al.  Fatigue crack propagation behavior of adhesively-bonded CFRP/aluminum joints , 2007 .

[55]  Robert D. Adams,et al.  Joint strength predictions for adhesive joints to be used over a wide temperature range , 2007 .

[56]  Boualem Serier,et al.  Fracture energy for repaired cracks with bonded composite patch having two adhesive bands in aircraft structures , 2007 .

[57]  William S. Johnson,et al.  Analysis of the Effects of Interference and Sealant on Riveted Lap Joints , 2007 .

[58]  Continuum damage modelling of environmental degradation in joints bonded with E32 epoxy adhesive , 2007 .

[59]  Free Vibration Analysis and Optimal Design of a Cantilevered Adhesively Bonded Composite Tubular Single Lap Joint , 2007 .

[60]  A. R. Hutchinson,et al.  Evaluation of different lap-shear joint geometries for automotive applications , 2007 .

[61]  M. Apalak,et al.  Optimal vibration attenuation of an adhesively-bonded cantilevered single-lap joint , 2007 .

[62]  Min You,et al.  A numerical and experimental study of gap length on adhesively bonded aluminum double-lap joint , 2007 .

[63]  S. Tjin,et al.  Changes in the reflected spectra of embedded chirped fibre Bragg gratings used to monitor disbonding in bonded composite joints , 2007 .

[64]  Şemsettin Temiz,et al.  Effect of Curing Pressure on the Strength of Adhesively Bonded Joints , 2007 .

[65]  R. Gunes,et al.  Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends , 2007 .

[66]  Farid Taheri,et al.  Analysis of deformations and stresses in balanced and unbalanced adhesively bonded single-strap joints , 2007 .

[67]  Robert D. Adams,et al.  Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives , 2007 .

[68]  Mustafa Yildirim,et al.  The free vibration analysis and optimal design of an adhesively bonded functionally graded single lap joint , 2007 .

[69]  Study on Adhesive Strength Criterion under Complex Stresses , 2007 .

[70]  M. Yıldırım,et al.  Free Vibration Analysis and Design of an Adhesively Bonded Corner Joint with Double Support , 2007 .

[71]  G. M. Swallowe,et al.  Experimental and Numerical Investigation of Mechanical and Thermal Residual Strains in Adhesively Bonded Joints , 2007 .

[72]  G. Paulino,et al.  Cohesive Zone Modeling of Mode I Fracture in Adhesive Bonded Joints , 2007 .

[73]  A numerical study of parallel slot in adherend on the stress distribution in adhesively bonded aluminum single lap joint , 2007 .

[74]  S. K. Panigrahi,et al.  Adhesion failure propagation in adhesively-bonded single-lap laminated FRP composite joints , 2007 .

[75]  F. Taheri,et al.  The strain energy release rates in adhesively bonded balanced and unbalanced specimens and lap joints , 2008 .

[76]  A numerical and experimental study of adhesively bonded aluminium single lap joints with an inner chamfer on the adherends , 2008 .

[77]  Ian A. Ashcroft,et al.  Impact fatigue in adhesive joints , 2008 .

[78]  Antonino Cirello,et al.  Crack growth analysis at adhesive–adherent interface in bonded joints under mixed mode I/II , 2008 .

[79]  J. J. Cheng,et al.  Cohesive zone with continuum damage properties for simulation of delamination development in fibre composites and failure of adhesive joints , 2008 .

[80]  Modelling of deformation and failure of crash toughened adhesive bonded lap shear joints , 2008 .

[81]  Characteristics of Stress Singularity Field of Residual Thermal Stresses at Vertex in Three-Dimensional Bonded Joints , 2008 .

[82]  M.F.S.F. de Moura,et al.  Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading , 2008 .

[83]  Computational Modelling of the Residual Strength of Repaired Composite Laminates Using a Cohesive Damage Model , 2008 .

[84]  I. Ashcroft,et al.  Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive , 2008 .

[85]  J. Gegner,et al.  Klebtechnik – multifunktionales Fügen für den nachhaltigen Werkstoffeinsatz im 21. Jahrhundert , 2008 .

[86]  A. Crocombe.  Incorporating Environmental Degradation in Closed Form Adhesive Joint Stress Analyses , 2008 .

[87]  Gao Zhiyong.  Safety Analysis of Complex System Based on Small World Topological Model , 2008 .

[88]  Ramazan Kahraman,et al.  Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive , 2008 .

[89]  Thomas Pardoen,et al.  Numerical analysis of the energy contributions in peel tests: A steady-state multilevel finite element approach , 2008 .

[90]  Farid Taheri,et al.  An Asymptotic Solution for Evaluation of Stresses in Balanced and Unbalanced Adhesively Bonded Joints , 2008 .

[91]  Three-Dimensional Finite Element Analysis of the Stress Distribution in Bi-Adhesive Bonded Joints , 2008 .

[92]  M.F.S.F. de Moura,et al.  Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs , 2008 .

[93]  J. Cognard,et al.  Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour , 2008 .

[94]  Naghdali Choupani,et al.  Mixed-mode cohesive fracture of adhesive joints: Experimental and numerical studies , 2008 .

[95]  Graham T. Reed,et al.  Disbond growth detection in composite-composite single-lap joints using chirped FBG sensors , 2008 .

[96]  Xiaocong He,et al.  Self-pierce riveting for sheet materials: State of the art , 2008 .

[97]  E. Marques,et al.  Joint Strength Optimization of Adhesively Bonded Patches , 2008 .

[98]  M. Tsai,et al.  Transient Stress Distributions in NCF-Bonded COG Packages due to Moisture Diffusion , 2008, IEEE Transactions on Advanced Packaging.

[99]  J. Morais,et al.  Modelling the tensile fracture behaviour of CFRP scarf repairs , 2009 .

[100]  Guoqiang Li,et al.  Cohesive zone model based analytical solutions for adhesively bonded pipe joints under torsional loading , 2009 .

[101]  Thomas Keller,et al.  Through-thickness performance of adhesive joints between FRP bridge decks and steel girders , 2009 .

[102]  剛 岩本,et al.  構造用エポキシ系接着剤バルク材の変形挙動のひずみ速度依存性 : 第2報,三次元構成式定式化と有限要素シミュレーション , 2009 .

[103]  Robert D. Adams,et al.  Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry , 2009 .

[104]  A. D. Crocombe,et al.  An investigation into the crack initiation and propagation behaviour of bonded single-lap joints using backface strain , 2009 .

[105]  Robert D. Adams,et al.  Experimental and numerical analysis of single-lap joints for the automotive industry , 2009 .

[106]  M. Saber,et al.  Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions , 2009 .

[107]  M. Apalak,et al.  Free Vibration Analysis and Optimal Design of a Clamped-free Single Lap Joint with Unidirectional Laminated Narrow Plates , 2009 .

[108]  T. Sawa,et al.  A Finite Element Stress Analysis of Adhesive Joint Bonded by Epoxy Resin Structural Adhesive under Impact Loading , 2009 .

[109]  S. K. Panigrahi.  Damage Analyses of Adhesively Bonded Single Lap Joints Due to Delaminated FRP Composite Adherends , 2009 .

[110]  M. Ueda,et al.  Effect of Bond Thickness on the Fracture Toughness and the Strain Field around a Crack Tip in Adhesive Joints Using Epoxy Resin Modified with Solid Rubber Particles , 2009 .

[111]  Deformations in adhesively bonded joints on elastic foundations , 2009 .

[112]  Two-Dimensional Stress Analysis of Adhesive Butt Joints Filled With Elastic Circular Fillers in the Adhesive Subjected to Static Tensile Loadings , 2009 .

[113]  H. Koguchi,et al.  Intensity of Residual Thermal Stresses at the Vertex in Three-Dimensional Joints with Three Layers : Influence of Thickness of Interlayer , 2009 .

[114]  Fracture Behaviour of Adhesively Bonded Joints in Sandwich Composite Beams , 2009 .

[115]  M.F.S.F. de Moura,et al.  Pure mode II fracture characterization of composite bonded joints , 2009 .

[116]  R. Adams,et al.  Analysis of Mixed Adhesive Bonded Joints Part I: Theoretical Formulation , 2009 .

[117]  Numerical prediction of load–displacement behaviors of adhesively bonded joints at different extension rates and temperatures , 2009 .

[118]  F. Taheri,et al.  Stress Analysis of Tubular Adhesive Joints with Delaminated Adherend , 2009 .

[119]  M. Yıldırım,et al.  Determination of Structural Damping and Optimal Vibration Control of an Adhesively-Bonded Double Containment Cantilever Joint , 2009 .

[120]  António Pereira,et al.  Study on the fatigue strength of AA 6082-T6 adhesive lap joints , 2009 .

[121]  A. R. Hutchinson,et al.  Fatigue performance of metallic reverse‐bent joints , 2009 .

[122]  Bo Zhao,et al.  A Two-Dimensional Approach of Single-Lap Adhesive Bonded Joints , 2009 .

[123]  Experimental and Numerical Analysis of Clinch (Hemflange) Joints Used in the Automotive Industry , 2009 .

[124]  A. Pirondi,et al.  Clinch-Bonded and Rivet-Bonded Hybrid Joints: Application of Damage Models for Simulation of Forming and Failure , 2009 .

[125]  Experimental and Analytical Investigations of the Dynamic Analysis of Adhesively Bonded Joints for Composite Structures , 2009 .

[126]  A. Waas,et al.  Rate effects in mode-II fracture of plastically deforming, adhesively bonded structures , 2009 .

[127]  Guoqiang Li,et al.  Local Damage Evolution of Double Cantilever Beam Specimens During Crack Initiation Process: A Natural Boundary Condition Based Method , 2009 .

[128]  D. Ko,et al.  Evaluation of Adhesive Properties Using Cohesive Zone Model : Mode I , 2009 .

[129]  Energy release rate and phase angle of delamination in sandwich beams and symmetric adhesively bonded joints , 2009 .

[130]  Min You,et al.  A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint , 2009 .

[131]  I. Ashcroft,et al.  Modelling Cyclic Moisture Uptake in an Epoxy Adhesive , 2009 .

[132]  R. Campilho,et al.  Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes , 2009 .

[133]  Paulo J. C. das Neves,et al.  Analysis of Mixed Adhesive Bonded Joints Part II: Parametric Study , 2009 .

[134]  A Three-Dimensional Finite Element Stress Analysis and Strength Prediction of Stepped-Lap Adhesive Joints of Dissimilar Adherends Subjected to Tensile Loadings , 2009 .

[135]  R. Adams,et al.  Experimental and Numerical Analysis of T-peel Joints for the Automotive Industry , 2009 .

[136]  Guoqiang Li,et al.  Interfacial debonding of pipe joints under torsion loads: a model for arbitrary nonlinear cohesive laws , 2009 .

[137]  Xiao Cong He.  Dynamic Behaviour of Single Lap-Jointed Cantilevered Beams , 2009 .

[138]  S. Hernández,et al.  Benchmarking of three-dimensional finite element models of CFRP single-lap bonded joints , 2010 .

[139]  M.F.S.F. de Moura,et al.  Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures , 2010 .

[140]  P. Bártolo,et al.  Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints , 2010 .

[141]  U. Edlund,et al.  A finite element method for failure analysis of adhesively bonded structures , 2010 .

[142]  G. N. Labeas,et al.  Experimental and numerical investigation of the influence of imperfect bonding on the strength of NCF double-lap shear joints , 2010 .

[143]  Susheel Kumar,et al.  Behaviour of Bi-adhesive Joints , 2010 .

[144]  F. Ascione,et al.  Failure Criteria for FRP Adhesive Lap Joints: A Comparative Analysis , 2010 .

[145]  I. Ashcroft,et al.  A generalised damage model for constant amplitude fatigue loading of adhesively bonded joints , 2010 .

[146]  F. Lachaud,et al.  Orthodontic bonding: Finite element for standardized evaluations , 2010 .

[147]  R. Haghani,et al.  Stress Distribution in Adhesive Joints with Tapered Laminates — Effect of Tapering Length and Material Properties , 2010 .

[148]  J. Cognard,et al.  Numerical analysis and optimisation of cylindrical adhesive joints under tensile loads , 2010 .

[149]  Lucas F. M. da Silva,et al.  Journal of Adhesion: Guest Editorial , 2010 .

[150]  I. Ashcroft,et al.  Thermal residual stress analysis of epoxy bi-material laminates and bonded joints , 2010 .

[151]  Toshiyuki Sawa,et al.  Stress analysis and strength evaluation of scarf adhesive joints subjected to static tensile loadings , 2010 .

[152]  Ulf Stigh,et al.  Dynamic testing and simulation of hybrid joined bi-material beam , 2010 .

[153]  G. Challita,et al.  Finite-element analysis of SHPB tests on double-lap adhesive joints , 2010 .

[154]  Ian A. Ashcroft,et al.  Unified methodology for the prediction of the fatigue behaviour of adhesively bonded joints , 2010 .

[155]  A. Pirondi,et al.  A Progressive Damage Model for the Prediction of Fatigue Crack Growth in Bonded Joints , 2010 .

[156]  J. K. Spelt,et al.  Modified DCB and CLS specimens for mixed-mode fatigue testing of adhesively bonded thin sheets , 2010 .

[157]  Eric Paroissien,et al.  Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive , 2010 .

[158]  George W. Ritter,et al.  Qualification of adhesives for marine composite-to-steel applications , 2010 .

[159]  A. P. Vassilopoulos,et al.  Effects of low and high temperatures on tensile behavior of adhesively-bonded GFRP joints , 2010 .

[160]  T. Sawa,et al.  A three-dimensional finite element stress analysis and strength prediction of stepped-lap adhesive joints of dissimilar adherends subjected to bending moments , 2010 .

[161]  A. Rudawska.  Adhesive joint strength of hybrid assemblies: Titanium sheet-composites and aluminium sheet-composites—Experimental and numerical verification , 2010 .

[162]  Till Vallée,et al.  Influence of stress-reduction methods on the strength of adhesively bonded joints composed of orthotropic brittle adherends , 2010 .

[163]  A. Pirondi,et al.  Local Stress Analysis of the Fatigue Behaviour of Adhesively Bonded Thick Composite Laminates , 2010 .

[164]  Massimo Rossetto,et al.  Stress intensity factor in bonded joints: influence of the geometry , 2010 .

[165]  Bond Thickness Effects upon Dynamic Behaviour in Adhesive Joints , 2010 .

[166]  J. Nisar,et al.  Meso-scale laminate adhesive joints for pultrusions , 2010 .

[167]  Robert D. Adams,et al.  A new method for the determination of bending moments in single lap joints , 2010 .

[168]  Hyonny Kim,et al.  Damage resistance of single lap adhesive composite joints by transverse ice impact , 2010 .

[169]  F. Ascione,et al.  Axial/Bending Coupled Analysis for FRP Adhesive Lap Joints , 2010 .

[170]  J. Caron,et al.  Non-linear failure criteria for a double lap bonded joint , 2010 .

[171]  Stephen C Bayne,et al.  A review of adhesion science. , 2010, Dental materials : official publication of the Academy of Dental Materials.

[172]  Xiaocong He,et al.  Recent development in finite element analysis of clinched joints , 2010 .

[173]  Ian A. Ashcroft,et al.  Fatigue life and backface strain predictions in adhesively bonded joints , 2010 .

[174]  B. Pradhan,et al.  Adhesion failure analyses of bonded tubular single lap joints in laminated fibre reinforced plastic composites , 2010 .

[175]  Mustafa Yildirim,et al.  Free vibration analysis of adhesively bonded single lap joints with wide and narrow functionally graded plates , 2010 .

[176]  Yi-Ming Jen,et al.  Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parameters , 2010 .

[177]  A. D. Crocombe,et al.  Evaluation of Fatigue Damage in Adhesive Bonding: Part 2: Single Lap Joint , 2010 .

[178]  A. D. Crocombe,et al.  Mixed-mode fracture of adhesively bonded metallic joints under quasi-static loading , 2010 .

[179]  Massimiliano Avalle,et al.  Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites , 2010 .