A porous building approach for modelling flow and heat transfer around and inside an isolated building on night ventilation and thermal mass

Recently, more and more attention is paid on passive energy saving technologies in buildings, including night ventilation and thermal mass. In the paper, a porous building model is proposed to investigate wind and thermal environment around and inside an isolated building on different amounts of night ventilation and amounts of thermal mass. Inside the building, the Brinkman-Forchheimer extended Darcy model (BFED model) and the local thermal non-equilibrium model (LTNE model) are first adopted, to represent flow and heat transfer between airflow and thermal mass. The reliability of the model is validated with published wind tunnel experimental data. After that, local wind and thermal characteristics, cooling effects of night ventilation are obtained. The effects of three key parameters: airflow velocity, airflow temperature and equivalent porosity of the building are investigated in detail. The results indicate that, the outdoor air temperature has a larger influence on the effects of night ventilation than airflow velocity. And the proposed porous building model shows great advantages in modelling heat transfer between airflow and thermal mass. The investigation provides thoughts for dealing with urban wind environment, outdoor thermal environment and wind environment of building arrays.

[1]  Xin Wang,et al.  Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation , 2009 .

[2]  Jianlei Niu,et al.  CFD simulation of the wind environment around an isolated high-rise building: An evaluation of SRANS, LES and DES models , 2016 .

[3]  R. L. Jensen,et al.  Experimental Investigation of Convective Heat Transfer during Night Cooling with Different Ventilation Systems and Surface Emissivities , 2013 .

[4]  Liu Yang,et al.  Zero energy buildings and sustainable development implications – A review , 2013 .

[5]  R Rubina Ramponi,et al.  Influence of the urban environment on the effectiveness of natural night-ventilation of an office building , 2014 .

[6]  Jiaping Liu,et al.  Development of passive design zones in China using bioclimatic approach , 2006 .

[7]  Yuguo Li,et al.  Macroscopic simulations of turbulent flows through high-rise building arrays using a porous turbulence model , 2012 .

[8]  Bje Bert Blocken,et al.  Review of external convective heat transfer coefficient models in building energy simulation programs: implementation and uncertainty , 2013 .

[9]  Robert F. Boehm,et al.  Passive building energy savings: A review of building envelope components , 2011 .

[10]  Jian Hang,et al.  Wind Conditions in Idealized Building Clusters: Macroscopic Simulations Using a Porous Turbulence Model , 2010 .

[11]  Yang Liu,et al.  A new method to develop typical weather years in different climates for building energy use studies , 2011 .

[12]  Brent R. Young,et al.  Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling , 2015, Thermal Energy Storage with Phase Change Materials.

[13]  Qingyan Chen,et al.  Ventilation performance prediction for buildings: A method overview and recent applications , 2009 .

[14]  Dominique Derome,et al.  CFD analysis of forced convective heat transfer coefficients at windward building facades: influence of building geometry , 2015 .

[15]  Baruch Givoni,et al.  Effectiveness of mass and night ventilation in lowering the indoor daytime temperatures. Part I: 1993 experimental periods , 1998 .

[16]  Edna Shaviv,et al.  Thermal mass and night ventilation as passive cooling design strategy , 2001 .

[17]  Qiuwang Wang,et al.  Energy and exergy analysis for waste heat cascade utilization in sinter cooling bed , 2014 .

[18]  Yan Liu,et al.  Experimental investigation of fluid flow and heat transfer in a randomly packed bed of sinter particles , 2016 .

[19]  Jing Liu,et al.  Evaluation of various non-linear k–ɛ models for predicting wind flow around an isolated high-rise building within the surface boundary layer , 2012 .

[20]  Xiaoxue Wang,et al.  A combined fully-resolved and porous approach for building cluster wind flows , 2017 .

[21]  A. Bejan,et al.  Convection in Porous Media , 1992 .

[22]  Jan Carmeliet,et al.  CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer , 2010 .

[23]  K. Pavlou,et al.  On the efficiency of night ventilation techniques applied to residential buildings , 2010 .

[24]  Alison Kwok,et al.  Addressing climate change in comfort standards , 2010 .

[25]  Shuzo Murakami,et al.  A study on a porous residential building model in hot and humid regions part 2—reducing the cooling load by component-scale voids and the CO2 emission reduction effect of the building model , 2006 .

[26]  S. Ergun.  Fluid flow through packed columns , 1952 .

[27]  Bje Bert Blocken,et al.  Pedestrian-level wind conditions around buildings: Review of wind-tunnel and CFD techniques and their accuracy for wind comfort assessment , 2016 .

[28]  Y. Tominaga.  Flow around a high-rise building using steady and unsteady RANS CFD: Effect of large-scale fluctuations on the velocity statistics , 2015 .

[29]  Min Zeng,et al.  Forced Convection Heat Transfer Enhancement by Porous Pin Fins in Rectangular Channels , 2010 .

[30]  Lina Yang,et al.  Cooling load reduction by using thermal mass and night ventilation , 2008 .

[31]  Yoshihide Tominaga,et al.  Numerical simulation of dispersion around an isolated cubic building: Comparison of various types of k–ɛ models , 2009 .

[32]  Shuzo Murakami,et al.  A study on a porous residential building model in hot and humid regions: Part 1—the natural ventilation performance and the cooling load reduction effect of the building model , 2006 .

[33]  Rasmus Lund Jensen,et al.  Experimental investigation of heat transfer during night-time ventilation , 2010 .

[34]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[35]  Bje Bert Blocken,et al.  Computational Fluid Dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations , 2015 .

[36]  Kambiz Vafai,et al.  Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions , 2002 .

[37]  Yanfeng Liu,et al.  Effect of the night ventilation rate on the indoor environment and air-conditioning load while considering wall inner surface moisture transfer , 2014 .