The fluidal interface is where the action is in CO2 sequestration and storage: Hydromechanical analysis of mechanical failure

Abstract In this paper, conceptual modeling and numerical simulation of two-phase flow during CO2 injection into deep saline aquifers is presented. The work focuses on isothermal transport and deformation processes in the vicinity of the injection well including hydromechanical failure analysis. Governing differential equations are based on balance laws for mass and momentum completed by constitutive relations for the fluid and solid phases as well as their interactions. Constraint conditions for the partial saturations and the pressure fractions of CO2 and brine are defined. To characterize the stress state in the solid matrix the effective stress principle is applied. The coupled problem is solved using an in-house scientific finite element code, and verified with benchmarks. In terms of application-oriented aspects, we examine the mechanical integrity of a deep saline aquifer during the injection of supercritical CO2. The analysis is conducted with a numerical scheme of the capillary pressure and non-wetting phase pressure for the two-phase flow process. In this study, unidirectional hydromechanical coupling is considered. Caprock stability is monitored in time, referenced to the potential for hydraulic fracture and shear slip along an optimally oriented shear plane for a suite of injection pressures. For reasonable parameter values and the chosen aquifer geometry, significant mechanical failure (and potential breach of integrity) is expected in the shale caprock for all but low injection rates. This indicates that the analysis of the hydromechanical response is crucial for proper selection of injection sites, injection rates, and total storage capacity.

[1]  Stefan Bachu,et al.  Semianalytical solution for CO2 leakage through an abandoned well. , 2005, Environmental science & technology.

[2]  M. Celia,et al.  Analytical solutions for leakage rates through abandoned wells , 2004 .

[3]  Jonny Rutqvist,et al.  Coupled reservoir-geomechanical analysis of the potential for tensile and shear failure associated with CO2 injection in multilayered reservoir-caprock systems , 2008 .

[4]  R de Boer,et al.  Theory of Porous Media: Highlights in Historical Development and Current State , 2000 .

[5]  F. Gumrah,et al.  Simulating the Effects of Deep Saline Aquifer Properties for CO Sequestration , 2005 .

[6]  Erik Lindeberg,et al.  Escape of CO2 from aquifers , 1997 .

[7]  Olaf Kolditz,et al.  Using global node-based velocity in random walk particle tracking in variably saturated porous media: application to contaminant leaching from road constructions , 2008 .

[8]  Olaf Kolditz,et al.  Object‐oriented finite element analysis of thermo‐hydro‐mechanical (THM) problems in porous media , 2007 .

[9]  Prasad Saripalli,et al.  Semi-analytical approaches to modeling deep well injection of CO2 for geological sequestration , 2002 .

[10]  Lincoln Paterson,et al.  Role of Convective Mixing in the Long-Term Storage of Carbon Dioxide in Deep Saline Formations , 2005 .

[11]  I. S. Shivakumara,et al.  Convective Instability in Superposed Fluid and Porous Layers with Vertical Throughflow , 2003 .

[12]  K. Pruess,et al.  Numerical Modeling of Aquifer Disposal of CO2 , 2003 .

[13]  J. C. Jaeger,et al.  Fundamentals of rock mechanics , 1969 .

[14]  Olaf Kolditz,et al.  Numerical analysis of coupled hydrosystems based on an object-oriented compartment approach , 2008 .

[15]  C. Tsang,et al.  A study of caprock hydromechanical changes associated with CO2-injection into a brine formation , 2002 .

[16]  Karsten Pruess,et al.  Multiphase flow dynamics during CO2 disposal into saline aquifers , 2002 .

[17]  C. Doughty,et al.  Modeling Supercritical Carbon Dioxide Injection in Heterogeneous Porous Media , 2004, Vadose Zone Journal.

[18]  Daniel M. Tartakovsky,et al.  Abrupt-Interface Solution for Carbon Dioxide Injection into Porous Media , 2009 .