Comparative study of gas–oil and gas–water two-phase flow in a vertical pipe

Abstract A wire-mesh sensor has been employed to study air/water and air/silicone oil two-phase flow in a vertical pipe of 67 mm diameter and 6 m length. The sensor was operated with a conductivity-measuring electronics for air/water flow and a permittivity-measuring one for air/silicone oil flow. The experimental setup enabled a direct comparison of both two-phase flow types for the given pipe geometry and volumetric flow rates of the flow constituents. The data have been interrogated at a number of levels. The time series of cross-sectionally averaged void fraction was used to determine characteristics in amplitude and frequency space. In a more three-dimensional examination, radial gas volume fraction profiles and bubble size distributions were processed from the wire-mesh sensor data and compared for both flow types. Information from time series and bubble size distribution data was used to identify flow patterns for each of the flow rates studied.

[1]  C. Brennen,et al.  Small amplitude kinematic wave propagation in two-component media , 1991 .

[2]  Geoffrey F. Hewitt,et al.  Prediction of the slug-to-churn flow transition in vertical two-phase flow , 1992 .

[3]  Barry J. Azzopardi,et al.  Effects of initial bubble size on flow pattern transition in a 28.9 mm diameter column , 2002 .

[4]  R. V. A. Oliemans,et al.  Influence of bubble size on the transition from low-Re bubbly flow to slug flow in a vertical pipe , 2002 .

[5]  Barry J. Azzopardi,et al.  High-resolution gas–oil two-phase flow visualization with a capacitance wire-mesh sensor , 2010 .

[6]  Trevor A. York.  Status of electrical tomography in industrial applications , 2001, J. Electronic Imaging.

[7]  G. Geraci,et al.  Effect of inclination on circumferential film thickness variation in annular gas/liquid flow , 2007 .

[8]  Geoffrey F. Hewitt,et al.  To churn or not to churn , 1993 .

[9]  N. Zuber,et al.  Average volumetric concentration in two-phase flow systems , 1965 .

[10]  U. Hampel,et al.  An ultra fast electron beam x-ray tomography scanner , 2008 .

[11]  Jiyuan Tu,et al.  Gas-liquid flows , 2009 .

[12]  Geir Anton Johansen.  Nuclear tomography methods in industry , 2005 .

[13]  M. D. Mantle,et al.  Dynamic MRI in chemical process and reaction engineering , 2003 .

[14]  R. Hampel,et al.  Approach towards spatial phase reconstruction in transient bubbly flow using a wire-mesh sensor , 2002 .

[15]  Horst-Michael Prasser,et al.  Wire-mesh sensors for high-resolving two-phase flow studies at high pressures and temperatures , 2007 .

[16]  D. Chisholm,et al.  Void Fraction during Two-Phase Flow: , 1973 .

[17]  Frank-Peter Weiss,et al.  Evolution of the structure of a gas–liquid two-phase flow in a large vertical pipe , 2007 .

[18]  B. Azzopardi,et al.  EXTRACTING INFORMATION FROM TIME SERIES DATA IN VERTICAL UPFLOW , 2009 .

[19]  G. Hewitt,et al.  Pressure effects on the slug to churn transition , 1999 .

[20]  Ion Tiseanu,et al.  Comparison between wire-mesh sensor and ultra-fast X-ray tomograph for an air–water flow in a vertical pipe , 2005 .

[21]  Gabriel Wild,et al.  Measuring techniques in gas–liquid and gas–liquid–solid reactors , 2002 .

[22]  H.-M. Prasser,et al.  Bubble recognition algorithms for the processing of wire-mesh sensor data; 6th International Conference on Multiphase Flow 2007; ; Proceedings of the ICMF 2007, 6th International Conference on Multiphase Flow : Leipzig July 9. - 13. 2007 , 2007 .

[23]  Todd Pugsley,et al.  The influence of permittivity models on phantom images obtained from electrical capacitance tomography , 2002 .

[24]  D. Mewes,et al.  Tomographic Measurement Techniques – Visualization of Multiphase Flows , 1998 .

[25]  H. Prasser,et al.  A new electrode-mesh tomograph for gas–liquid flows , 1998 .

[26]  Frank-Peter Weiss,et al.  Influence of the Pipe Diameter on the Structure of the Gas-Liquid Interface in a Vertical Two-Phase Pipe Flow , 2005 .

[27]  Studies of the Interaction of Ionic Liquid and Gas in a Small-Diameter Bubble Column , 2009 .

[28]  Milorad P. Dudukovic,et al.  Opaque multiphase flows: experiments and modeling , 2002 .

[29]  Dvora Barnea,et al.  Transition from annular flow and from dispersed bubble flow—unified models for the whole range of pipe inclinations , 1986 .

[30]  Eckhard Krepper,et al.  Development of co-current air–water flow in a vertical pipe , 2005 .

[31]  Barry J. Azzopardi,et al.  Fluctuations in dense phase pneumatic conveying of pulverised coal measured using electrical capacitance tomography , 2008 .

[32]  Joseph N. Gray,et al.  An X-ray system for visualizing fluid flows , 2008 .

[33]  Zai-Sha Mao,et al.  The myth of churn flow , 1993 .

[34]  U. Hampel,et al.  Capacitance wire-mesh sensor for fast measurement of phase fraction distributions , 2007 .

[35]  A. Cartellier,et al.  Local phase detection probes in fluid/fluid two‐phase flows , 1991 .

[36]  H. Prasser,et al.  Bubble size measurement using wire-mesh sensors , 2001 .

[37]  A. E. Dukler,et al.  Modelling flow pattern transitions for steady upward gas‐liquid flow in vertical tubes , 1980 .

[38]  H. No,et al.  Investigation of bubble flow developments and its transition based on the instability of void fraction waves , 1995 .