EVALUATING THE PERFORMANCE OF

Distribution A – Approved for public release; further dissemination unlimited. DISCLAIMER This report was prepared as an account of work sponsored by the AirConditioning and Refrigeration Technology Institute (ARTI) under its " HVAC&R Research for the 21 st Century " (21-CR) program. Neither ARTI, the financial supporters of the 21-CR program, or any agency thereof, nor any of their employees, contractors, subcontractors or employees thereof-makes any warranty, expressed or implied; assumes any legal liability or responsibility for the accuracy, completeness, any third party's use of, or the results of such use of any information, apparatus, product, or process disclosed in this report; or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute nor imply its endorsement, recommendation, or favoring by ARTI, its sponsors, or any agency thereof or their contractors or subcontractors. The views and opinions of authors expressed herein do not necessarily state or reflect those of ARTI, the 21-CR program sponsors, or any agency thereof.

[1]  J. E. Braun,et al.  Theoretical evaluation of the optimal performance of a thermoacoustic refrigerator , 1997 .

[2]  G. W. Swift,et al.  Acoustic streaming in pulse tube refrigerators: tapered pulse tubes , 1997 .

[3]  Gusev,et al.  Acoustic streaming in annular thermoacoustic prime-movers , 2000, The Journal of the Acoustical Society of America.

[4]  Chi-Chuan Wang,et al.  Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers , 1999 .

[5]  Ashok Gopinath,et al.  Thermoacoustic streaming in a resonant channel: The time-averaged temperature distribution , 1998 .

[6]  Steven L. Garrett.  Reinventing the engine , 1999, Nature.

[7]  A model for transverse heat transfer in thermoacoustics , 1998 .

[8]  Stephen C. Ballister,et al.  Shipboard electronics thermoacoustic cooler , 1995 .

[9]  W. P. Arnott,et al.  Thermoacoustic engines , 1991, IEEE 1991 Ultrasonics Symposium,.

[10]  Ralph L. Webb,et al.  HEAT TRANSFER AND FRICTION CORRELATIONS FOR PLATE FINNED-TUBE HEAT EXCHANGERS HAVING PLAIN FINS , 1986 .

[11]  G. W. Swift,et al.  Thermoacoustics in pin‐array stacks , 1993 .

[12]  C. Trepp,et al.  AN ALTERNATIVE STACK ARRANGEMENT FOR THERMOACOUSTIC HEAT PUMPS AND REFRIGERATORS , 1999 .

[13]  Larry Allan Grant.  An investigation of the physical characteristics of a mass element resonator. , 1992 .

[14]  George Mozurkewich.  Heat transfer from a cylinder in an acoustic standing wave , 1995 .

[15]  W. Arnott,et al.  Radial wave thermoacoustic engines: Theory and examples for refrigerators and high‐gain narrow‐bandwidth photoacoustic spectrometers , 1996 .

[16]  Martin Wetzel,et al.  Experimental study of thermoacoustic effects on a single plate Part II: Heat transfer , 1999 .

[17]  Wakeland,et al.  Use of electrodynamic drivers in thermoacoustic refrigerators , 1999, The Journal of the Acoustical Society of America.

[18]  R. Radebaugh,et al.  Development of a thermoacoustically driven orifice pulse tube refrigerator , 1990 .

[19]  T. Hofler.  Thermoacoustic Refrigerator Design and Performance , 1986 .

[20]  R Raspet,et al.  Working gases in thermoacoustic engines. , 1999, The Journal of the Acoustical Society of America.

[21]  David K. Perkins,et al.  THERMOACOUSTIC REFRIGERATOR HEAT EXCHANGERS: DESIGN, ANALYSIS AND FABRICATION , 1994 .

[22]  Steven L. Garrett,et al.  A thermoacoustic refrigerator for space applications. , 1989 .

[23]  G. Mozurkewich.  Time-average temperature distribution in a thermoacoustic stack , 1998 .

[24]  G. Swift.  Thermoacoustics: A Unifying Perspective for Some Engines and Refrigerators , 2017 .

[25]  David K. Perkins,et al.  Thermoacoustic life sciences refrigerator , 1993 .

[26]  Rhys Adam Starr.  The effect of streaming on thermoacoustic systems , 2001 .

[27]  G. W. Swift,et al.  An intrinsically irreversible thermoacoustic heat engine , 1983 .

[28]  R. Waxler,et al.  Stationary velocity and pressure gradients in a thermoacoustic stack. , 2001, The Journal of the Acoustical Society of America.

[29]  Martin Wetzel,et al.  Experimental study of thermoacoustic effects on a single plate Part I: Temperature fields , 2000 .

[30]  Poese,et al.  Performance measurements on a thermoacoustic refrigerator driven at high amplitudes , 1998, The Journal of the Acoustical Society of America.

[31]  Gregory W. Swift,et al.  Analysis and performance of a large thermoacoustic engine , 1992 .

[32]  Gregory W. Swift,et al.  DESIGN ENVIRONMENT FOR LOW-AMPLITUDE THERMOACOUSTIC ENGINES , 1994 .

[33]  G. Swift,et al.  A thermoacoustic-Stirling heat engine: detailed study , 2000, The Journal of the Acoustical Society of America.

[34]  John J. Wollan,et al.  Thermoacoustic natural gas liquefier , 1995 .

[36]  David K. Perkins,et al.  Thermoacoustic Refrigeration , 1993 .

[37]  Anthony A. Atchley,et al.  Measurements with reticulated vitreous carbon stacks in thermoacoustic prime movers and refrigerators , 1996 .

[38]  H. Bass,et al.  Temperature discontinuities between elements of thermoacoustic devices , 1997 .

[39]  G. W. Swift,et al.  Experiments with a flow-through thermoacoustic refrigerator , 2000 .