Comparative durability analysis of CFRP-strengthened RC highway bridges

Abstract The paper presents parametric analysis of durability factors of RC highway bridges strengthened with CFRP laminates during their service life. Durability factors considered are concrete cover and CFRP laminate thickness. Three deterioration factors were considered. First, growth of live load with time. Second, resistance reduction due to chloride-attack corrosion which causes reduction in steel properties. Corrosion losses are evaluated through a time–temperature dependent corrosion current. Two types of corrosion are considered; uniform and pitting corrosion. Third, deterioration due to aging of CFRP. The reliability analysis is controlled by three failure modes; concrete crushing, CFRP mid span debonding and CFRP rupture. Monte-Carlo simulation is used to develop time dependent statistical models for rebar steel area and live load extreme effect. Reliability is estimated in term of reliability index using FORM algorithm. For illustrative purpose, a RC bridge is assumed as an example. The reliability of interior beam of the bridge is evaluated under various traffic volumes and different corrosion environments. The bridge design options follow AASHTO-LRFD specifications. The present work also extends to calibrate CFRP resistance safety factor corresponds to three target reliability levels, β  = 3.5, 3.85, and 4.2. The results of the analysis have shown that corrosion has the most significant effect on bridge life time followed by live load growth. Pitting corrosion type is more hazardous than uniform. Also, initial safety index is proved to be traffic dependent. AASHTO design equation (that corresponds β target  = 3.5) seems to be overestimated for strengthening purpose. Strengthening with ( β target  = 4.2) provide better reliability than β target proposed by AASHTO provision with no significant differences in CFRP amounts required.

[1]  Dimitri V. Val,et al.  Probabilistic evaluation of initiation time of chloride-induced corrosion , 2008, Reliab. Eng. Syst. Saf..

[2]  Scott T Smith,et al.  Intermediate crack-induced debonding in RC beams and slabs , 2003 .

[3]  Jian fei Chen,et al.  Anchorage strength models for FRP and steel plates bonded to concrete , 2001 .

[4]  Dimitris Diamantidis,et al.  The Joint Committee on Structural Safety (JCSS) Probabilistic Model Code for New and Existing Structures , 1999 .

[5]  F. Duprat,et al.  Reliability of RC beams under chloride-ingress , 2007 .

[6]  Robert E. Melchers,et al.  Life‐Cycle Performance of RC Bridges: Probabilistic Approach , 2000 .

[7]  Mark G. Stewart,et al.  Time-dependent reliability of deteriorating reinforced concrete bridge decks , 1998 .

[8]  T. Luping,et al.  On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete , 2007 .

[9]  Vistasp M. Karbhari,et al.  Consideration of material variability in reliability analysis of FRP strengthened bridge decks , 2005 .

[10]  Alaa Chateauneuf,et al.  Coupled reliability model of biodeterioration, chloride ingress and cracking for reinforced concrete structures , 2008 .

[11]  Giovanni Plizzari,et al.  Mechanical Properties of Corrosion-Damaged Reinforcement , 2005 .

[12]  Riadh Al-Mahaidi,et al.  Reliablity analysis of bridge beams retrofitted with fibre reinforced polymers , 2008 .

[13]  Richard E. Weyers,et al.  MODELING THE TIME-TO-CORROSION CRACKING IN CHLORIDE CONTAMINATED REINFORCED CONCRETE STRUCTURES , 1998 .

[14]  Yingshu Yuan,et al.  Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate , 2009 .

[15]  Mark G. Stewart,et al.  Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis , 2008, Reliab. Eng. Syst. Saf..

[16]  T. Triantafillou,et al.  RELIABILITY OF RC MEMBERS STRENGTHENED WITH CFRP LAMINATES , 1995 .

[17]  Christoph Czaderski,et al.  Debonding failure modes of flexural FRP-strengthened RC beams , 2008 .

[18]  Mark G. Stewart,et al.  Corrosion-Induced Cracking: Experimental Data and Predictive Models , 2005 .

[19]  Vistasp M. Karbhari,et al.  Design factors, reliability, and durability prediction of wet layup carbon/epoxy used in external strengthening , 2007 .

[20]  Emilio Bastidas-Arteaga,et al.  Probabilistic lifetime assessment of RC structures under coupled corrosion–fatigue deterioration processes , 2009 .

[21]  Vistasp M. Karbhari,et al.  Sources of uncertainty and design values for field-manufactured FRP , 2009 .

[22]  Riadh Al-Mahaidi,et al.  Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites , 2004 .

[23]  O. Isgor,et al.  The effect of temperature on the corrosion of steel in concrete. Part 2: Model verification and parametric study , 2009 .

[24]  Niels C. Lind,et al.  System reliability models for bridge structures , 1987 .

[25]  Haeng-Ki Lee,et al.  Behavior and performance of RC T-section deep beams externally strengthened in shear with CFRP sheets , 2011 .

[26]  Ashraf F. Ashour,et al.  Flexural strengthening of RC continuous beams using CFRP laminates , 2004 .

[27]  Stephanie L. Walkup,et al.  Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .

[28]  A. Almusallam,et al.  Effect of degree of corrosion on the properties of reinforcing steel bars , 2001 .

[29]  Robert E. Melchers,et al.  Analytical Model for Corrosion-Induced Crack Width in Reinforced Concrete Structures , 2006 .

[30]  Khaled Soudki,et al.  Evaluation of corrosion activity in FRP repaired RC beams , 2006 .

[31]  Andrzej S. Nowak,et al.  Live load model for highway bridges , 1993 .

[32]  M. Fardis,et al.  Physical and Chemical Characteristics Affecting the Durability of Concrete , 1991 .

[33]  H. Lee,et al.  Numerical evaluation of shear strengthening performance of CFRP sheets/strips and sprayed epoxy coating repair systems , 2008 .

[34]  Abhijit Mukherjee,et al.  Corrosion of steel reinforcements embedded in FRP wrapped concrete , 2009 .

[35]  Mark G. Stewart,et al.  Structural reliability of concrete bridges including improved chloride-induced corrosion models , 2000 .