A novel compound control strategy to achieve input voltage sharing and output current sharing for distributed input-series-output-parallel inverter system

Input-series-output-parallel (ISOP) inverter system is very suitable for high input voltage and high output current power conversion applications. The control objective of the system is to achieve input voltage sharing (IVS) and output current sharing (OCS) among the constituent modules. Aiming at the target, this paper presents a novel compound control strategy, i.e., the method entitled input voltage sharing combined with the same inductor current amplitude. In the proposed scheme, the phase of inductor current and accordingly the active power of each module are regulated by IVS loop based on the deviation between input voltage of respective module and average input voltage. And meanwhile, the amplitude of each inductor current is kept the same and so the OCS is realized. Furthermore, a new solution dedicated to distributed configuration is put forward, and the communications among the modules are realized through three buses. The experimental results validate the effectiveness of the control strategy and the distributed configuration.

[1]  T. Matsumoto,et al.  High power AC/DC converter and DC/AC inverter for high speed train applications , 2000, 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No.00CH37119).

[2]  Jung-Won Kim,et al.  Modeling, control, and design of input-series-output-parallel-connected converter for high-speed-train power system , 2001, IEEE Trans. Ind. Electron..

[3]  R. Ayyanar,et al.  Active input-voltage and load-current sharing in input-series and output-parallel connected modular DC-DC converters using dynamic input-voltage reference scheme , 2004, IEEE Transactions on Power Electronics.

[4]  R. Ayyanar,et al.  Fault Tolerant Circuit Topology and Control Method for Input-Series and Output-Parallel Modular DC-DC Converters , 2008, IEEE Transactions on Power Electronics.

[5]  Xinbo Ruan,et al.  Input-Series and Output-Parallel Connected Inverter System for High Input Voltage Applications , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[6]  Xinbo Ruan,et al.  Control strategy to achieve input voltage sharing and output current sharing for input-series-output-parallel inverter , 2008, 2008 IEEE Power Electronics Specialists Conference.

[7]  R. Ayyanar,et al.  Common duty ratio control of input series connected modular DC-DC converters with active input voltage and load current sharing , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[8]  Xinbo Ruan,et al.  DC/DC Conversion Systems Consisting of Multiple Converter Modules: Stability, Control, and Experimental Verifications , 2009, IEEE Transactions on Power Electronics.

[9]  Xinbo Ruan,et al.  Control Strategy to Achieve Input and Output Voltage Sharing for Input-Series–Output-Series-Connected Inverter Systems , 2010, IEEE Transactions on Power Electronics.

[10]  Byeong-Mun Song,et al.  A three-level DC-DC converter with wide-input voltage operations for ship-electric-power-distribution systems , 2003, IEEE Transactions on Plasma Science.

[11]  P.J. Grbovic Master/Slave Control of Input-Series- and Output-Parallel-Connected Converters: Concept for Low-Cost High-Voltage Auxiliary Power Supplies , 2009, IEEE Transactions on Power Electronics.

[12]  Xinbo Ruan,et al.  A Input-Series- and Output-Parallel-Connected Inverter System for High-Input-Voltage Applications , 2009, IEEE Transactions on Power Electronics.