Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts

In recent decades, fuel cell technology has been undergoing revolutionary developments, with fundamental progress being the replacement of electrolyte solutions with polymer electrolytes, making the device more compact in size and higher in power density. Nowadays, acidic polymer electrolytes, typically Nafion, are widely used. Despite great success, fuel cells based on acidic polyelectrolyte still depend heavily on noble metal catalysts, predominantly platinum (Pt), thus increasing the cost and hampering the widespread application of fuel cells. Here, we report a type of polymer electrolyte fuel cells (PEFC) employing a hydroxide ion-conductive polymer, quaternary ammonium polysulphone, as alkaline electrolyte and nonprecious metals, chromium-decorated nickel and silver, as the catalyst for the negative and positive electrodes, respectively. In addition to the development of a high-performance alkaline polymer electrolyte particularly suitable for fuel cells, key progress has been achieved in catalyst tailoring: The surface electronic structure of nickel has been tuned to suppress selectively the surface oxidative passivation with retained activity toward hydrogen oxidation. This report of a H2–O2 PEFC completely free from noble metal catalysts in both the positive and negative electrodes represents an important advancement in the research and development of fuel cells.

[1]  Koji Yamada,et al.  A platinum-free zero-carbon-emission easy fuelling direct hydrazine fuel cell for vehicles. , 2007, Angewandte Chemie.

[2]  R. Slade,et al.  Development of Cathode Architectures Customized for H2/O2 Metal-Cation-Free Alkaline Membrane Fuel Cells , 2007 .

[3]  Chun–Chen Yang.  Synthesis and characterization of the cross-linked PVA/TiO2 composite polymer membrane for alkaline DMFC , 2007 .

[4]  L. Zhuang,et al.  First-principles considerations in the design of Pd-alloy catalysts for oxygen reduction. , 2007, Angewandte Chemie.

[5]  J. Fauvarque,et al.  Characterization and use of anionic membranes for alkaline fuel cells , 2001 .

[6]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[7]  L. Zhuang,et al.  A feasibility analysis for alkaline membrane direct methanol fuel cell: thermodynamic disadvantages versus kinetic advantages , 2003 .

[8]  J. Varcoe.  Investigations of the ex situ ionic conductivities at 30 degrees C of metal-cation-free quaternary ammonium alkaline anion-exchange membranes in static atmospheres of different relative humidities. , 2007, Physical chemistry chemical physics : PCCP.

[9]  R. Slade,et al.  Poly(ethylene-co-tetrafluoroethylene)-Derived Radiation-Grafted Anion-Exchange Membrane with Properties Specifically Tailored for Application in Metal-Cation-Free Alkaline Polymer Electrolyte Fuel Cells , 2007 .

[10]  T. Abe,et al.  Alkaline direct alcohol fuel cells using an anion exchange membrane , 2005 .

[11]  R. Slade,et al.  An alkaline polymer electrochemical interface: a breakthrough in application of alkaline anion-exchange membranes in fuel cells. , 2006, Chemical communications.

[12]  R. Slade,et al.  The radiation-grafting of vinylbenzyl chloride onto poly(hexafluoropropylene-co-tetrafluoroethylene) films with subsequent conversion to alkaline anion-exchange membranes: optimisation of the experimental conditions and characterisation , 2003 .

[13]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[14]  R. Slade,et al.  Alkaline anion-exchange radiation-grafted membranes for possible electrochemical application in fuel cells , 2003 .

[15]  Ribes Greus,et al.  Alkaline Fuel Cells , 2010 .

[16]  Cy H. Fujimoto,et al.  Transport Properties of Hydroxide and Proton Conducting Membranes , 2008 .

[17]  M. Shao,et al.  Pd-Fe nanoparticles as electrocatalysts for oxygen reduction. , 2006, Journal of the American Chemical Society.

[18]  Mahlon Wilson,et al.  Scientific aspects of polymer electrolyte fuel cell durability and degradation. , 2007, Chemical reviews.

[19]  R. Slade,et al.  Investigations of conductivity in FEP-based radiation-grafted alkaline anion-exchange membranes , 2005 .

[20]  M. Schulze,et al.  Activation of nickel-anodes for alkaline fuel cells , 2001 .

[21]  Robert C T Slade,et al.  A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell. , 2008, ChemSusChem.

[22]  José L. Fernández,et al.  Pd-Ti and Pd-Co-Au electrocatalysts as a replacement for platinum for oxygen reduction in proton exchange membrane fuel cells. , 2005, Journal of the American Chemical Society.

[23]  R. Slade,et al.  An electron-beam-grafted ETFE alkaline anion-exchange membrane in metal-cation-free solid-state alkaline fuel cells , 2006 .

[24]  Keith Scott,et al.  Development of direct methanol alkaline fuel cells using anion exchange membranes , 2004 .

[25]  José L. Fernández,et al.  Thermodynamic guidelines for the design of bimetallic catalysts for oxygen electroreduction and rapid screening by scanning electrochemical microscopy. M-co (M: Pd, Ag, Au). , 2005, Journal of the American Chemical Society.

[26]  W. Colella,et al.  Cleaning the Air and Improving Health with Hydrogen Fuel-Cell Vehicles , 2005, Science.

[27]  Won-Yong Lee,et al.  Performance of solid alkaline fuel cells employing anion-exchange membranes , 2008 .

[28]  Piotr Zelenay,et al.  A class of non-precious metal composite catalysts for fuel cells , 2006, Nature.

[29]  Robert C T Slade,et al.  Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes. , 2006, The journal of physical chemistry. B.