Effects of the generic nature of polymers on their fire behavior

Fire behavior of four aliphatic and two aromatic C, H, O, N, S, and Cl atom containing polymers has been examined. Experiments were performed in three ASTM E 2058 Fire Propagation Apparatuses. The differences in the ignition behavior of polymers were found to be mainly due to differences in the ignition temperature. Chemical effects appear to contribute about 25 % towards the ignition resistance of the polymers. For thermoplastics, formation of polymer melt and its burning as a pool fire was found to increase the fire intensity by factors of two to four. The combustion efficiency and generation efficiency of CO2 were found to decrease and the generation efficiencies of CO and smoke were found to increase by changes in the generic nature of the polymers (aliphatic to aromatic to halogenated). About four times as much carbon atoms in the polymers converted to smoke than converted to CO. Large-scale fire propagation behavior of polymers was characterized by a Fire Propagation Index (FPI). The FPI values of melting type thermoplastics (showing rapid-fire propagation behavior) were high, whereas they were low for the engineered charring type and halogenated polymers (showing either slow or decelerating fire propagation behavior).

[1]  A. Tewarson.  Generation of Heat and Chemical Compounds in Fires , 2002 .

[2]  Guy Marlair,et al.  Evaluation of the performance of three ASTM E 2058 and NFPA 287 fire propagation apparatuses , 2001 .

[3]  Peter K. Wu,et al.  Flammability evaluation of clean room polymeric materials for the semiconductor industry , 2001 .

[4]  Reza Sharifi,et al.  Combustion Science and Technology , 2000 .

[5]  John R. Shields,et al.  Burning Behavior of Selected Automotive Parts From a Minivan. , 1998 .

[6]  Philip J. Cox,et al.  Physical properties of polymers handbook , 1997 .

[7]  A. Tewarson,et al.  Pyrolysis efficiency in upward flame spread. , 1996 .

[8]  R. Stephen Berry,et al.  Power and efficiency limits for internal combustion engines via methods of finite‐time thermodynamics , 1993 .

[9]  Hans Domininghaus,et al.  Plastics for Engineers: Materials, Properties, Applications , 1993 .

[10]  M. Delichatsios,et al.  Upward Fire Spread: Key Flammability Properties, Similarity Solutions And Flammability Indices , 1991 .

[11]  A. Tewarson,et al.  Fire Propagation Behavior Of Electrical Cables , 1989 .

[12]  Patrick J. Pagni,et al.  Fire safety science , 1986 .

[13]  J. Quintiere,et al.  Wall Flames and Implications for Upward Flame Spread , 1986 .

[14]  A. Fernandez-Pello,et al.  Controlling Mechanisms of Flame Spread , 1983 .

[15]  J. L. Lee,et al.  The influence of oxygen concentration on fuel parameters for fire modeling , 1981 .

[16]  Charles A. Harper,et al.  Handbook of plastics and elastomers , 1975 .

[17]  G. H. Markstein,et al.  Upward turbulent fire spread and burning of fuel surface , 1975 .

[18]  C. P. Fenimore,et al.  Flammability of polymers , 1966 .