Influence of Surface Properties and Characteristics on Fouling in Plate Heat Exchangers

Abstract The scope of the present work was to investigate the influence of surface properties of corrugated heat exchanger plates on calcium sulpate crystallization fouling from aqueous salt solutions. The applied surface treatment technologies for the heat exchanger plates are ion beam implantation, ion sputtering, carbo-nitriding & oxidizing, and Ni-P-PTFE coating. Ten pairs of Alfa Laval M3 heat exchanger plates were treated with these techniques and used for this study. Other process parameters such as temperature, solution composition, flow velocity, and the corrugation inclination angle of the plates were kept constant in order to allow for a comparison between the different surface treatments. To evaluate the influence of surface roughness on CaSO4 crystallization fouling, one pair of plates was electropolished. Surface energy and surface roughness measurements were carried out to characterize the treated surfaces.

[1]  R. Rowell,et al.  Physical Chemistry of Surfaces, 6th ed. , 1998 .

[2]  M. Bellon-Fontaine,et al.  The influence of metallic surface wettability on bacterial adhesion , 1993 .

[3]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[4]  S. S. Tulsi.  Composite PTFE-Nickel coatings for low friction applications , 1983 .

[5]  H. S. Myers,et al.  Electropolishing, Anodizing and Electrolytic Pickling of Metals , 1960 .

[6]  Swaraj Paul.  Surface coatings : science & technology , 1996 .

[7]  H. Steinhagen.  Fouling : The Ultimate Challenge for Heat Exchanger Design , 1993 .

[8]  H. Müller-Steinhagen,et al.  The effect of surface properties on CaSO4 scale formation during convective heat transfer and subcooled flow boiling , 2000 .

[9]  S. S. Tulsi.  Electroless Nickel-PTFE Composite Coatings , 1983 .

[10]  S. Yariv,et al.  Physical Chemistry of Surfaces , 1979 .

[11]  A. Niku-Lari,et al.  Metal Treatments Against Wear, Corrosion, Fretting and Fatigue , 1988 .

[12]  Hans Müller-Steinhagen,et al.  Investigation of low fouling surface alloys made by ion implantation technology , 1997 .

[13]  W. Domke.  Werkstoffkunde und Werkstoffprüfung , 1982 .

[14]  T. Bott.  CHAPTER 7 – Particulate Deposition , 1995 .

[15]  S. Hoppe,et al.  Fundamentals and applications of the combination of plasma nitrocarburizing and oxidizing , 1998 .

[16]  M. Mantel,et al.  Influence of the surface chemistry on the wettability of stainless steel , 1994 .

[17]  P. K. Datta,et al.  Coatings and surface treatment for corrosion and wear resistance , 1984 .

[18]  J. Donnet,et al.  Surface properties of high-energy solids , 1977 .

[19]  Hans Müller-Steinhagen,et al.  Effect of flow distribution on scale formation in plate and frame heat exchangers. , 1997 .

[20]  Wolfgang Augustin,et al.  Influence of the adhesion force crystal/heat exchanger surface on fouling mitigation , 1999 .

[21]  K. H. Maier,et al.  Erfahrungen mit Platten- und Spiral-Wärmeübertragern , 1996 .