Identification of modal parameters based on moving load excitation

Abstract It is often desired to measure the model parameters of bridges, but normally the forcing function cannot be measured so it is necessary to use output-only system identification methods. A moving vehicle provides a force on a bridge that could be used for input-output analysis, which could be superior, but the force varies in space as well as time, so existing system identification methods are not directly applicable. To address this issue, this paper proposes a new strategy to use the moving load response to identify the modal parameters. A numerically simulated simply supported Euler-Bernoulli beam of known parameters is used as an example case to test the validity of the approach. Frequency Domain Decomposition is first implemented to extract the mode shapes from the simulated acceleration responses. Then, by applying the mode superposition method, the simulated force and acceleration responses are transformed into modal space. The accelerances of five modes are then processed using the Levenberg-Marquardt method such that the three unknown parameters, namely natural frequency, damping ratio, and modal mass, of each mode are determined simultaneously. The effectiveness of the proposed method is validated by the low percentage errors (less than 1.7%) for all three identified modal parameters compared to their actual values for four of the five modes.