An X-Band SiGe driver amplifier

In this paper, an integrated driver amplifier operating at X-Band (7-10 GHz) frequencies is presented. This driver amplifier is implemented in a 0.25-μm SiGe BiCMOS process. The two-stage push-pull amplifier uses on-chip transformers for the purpose of single-ended to differential signal conversion as well as input and output impedance matching. Operating with a 3.3 V supply voltage, the amplifier exhibits a measured output power of 13 dBm at 1-dB compression point with power-added efficiency of 12% and small signal gain of 21 dB.

[1]  P. J. Tasker,et al.  A 40W push-pull power amplifier for high efficiency, decade bandwidth applications at microwave frequencies , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[2]  P. Weger,et al.  A Fully Integrated 3.3–3.8-GHz Power Amplifier With Autotransformer Balun , 2009, IEEE Transactions on Microwave Theory and Techniques.

[3]  M. Racanelli,et al.  SiGe BiCMOS technology for RF circuit applications , 2005, IEEE Transactions on Electron Devices.

[4]  Peter Weger,et al.  Fully monolithically integrated X-band power amplifier without external matching , 2010, 6th Conference on Ph.D. Research in Microelectronics & Electronics.

[5]  Songcheol Hong,et al.  A Wideband Transformer-Coupled CMOS Power Amplifier for $X$-Band Multifunction Chips , 2011, IEEE Transactions on Microwave Theory and Techniques.

[6]  W. Bakalski,et al.  A fully integrated 7-18 GHz power amplifier with on-chip output balun in 75 GHz-f/sub T/ SiGe-bipolar , 2003, 2003 Proceedings of the Bipolar/BiCMOS Circuits and Technology Meeting (IEEE Cat. No.03CH37440).