Suppression of Manganese-ion Dissolution by SiO2 Aerosol Addition from Spray Pyrolyzed Li2MnO3-LiMn1/3Ni1/3Co1/3O2

[1]  Feng Wu,et al.  Modified electrochemical performance of high potential cathode using a sand-like carbonate electrolyte , 2014 .

[2]  R. Axelbaum,et al.  Effects of synthesis conditions on the physical and electrochemical properties of Li1.2Mn0.54Ni0.13Co0.13O2 prepared by spray pyrolysis , 2014 .

[3]  Toyoki Okumura,et al.  The effects of Al2O3 coating on the performance of layered Li1.20Mn0.55Ni0.16Co0.09O2 materials for lithium-ion rechargeable battery , 2014 .

[4]  J. S. Chae,et al.  Enhanced high-temperature cycling of Li2O–2B2O3-coated spinel-structured LiNi0.5Mn1.5O4 cathode material for application to lithium-ion batteries , 2014 .

[5]  De-cheng Li,et al.  High-Rate Capability of Lithium-Rich Layered Li1.2Ni0.18Mn0.59Co0.03O2 Cathode Material Prepared from Size-Regulated Precursor Fine Particles , 2014 .

[6]  Satoshi Hashigami,et al.  Improvement of the redox durability of Ni-gadolinia doped ceria anodes due to the use of the composite particles prepared by spray pyrolysis method , 2014 .

[7]  Jiangfeng Qian,et al.  Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material , 2013 .

[8]  Kevin G. Gallagher,et al.  Correlating hysteresis and voltage fade in lithium- and manganese-rich layered transition-metal oxide electrodes , 2013 .

[9]  Young Jun Hong,et al.  Effects of ratios of Li2MnO3 and Li(Ni1/3Mn1/3Co1/3)O2 phases on the properties of composite cathode powders in spray pyrolysis , 2013 .

[10]  Kevin G. Gallagher,et al.  Examining Hysteresis in Composite xLi2MnO3·(1−x)LiMO2 Cathode Structures , 2013 .

[11]  Young Jun Hong,et al.  Effect of boric acid on the properties of Li2MnO3·LiNi0.5Mn0.5O2 composite cathode powders prepared by large-scale spray pyrolysis with droplet classifier , 2012 .

[12]  G. Lindbergh,et al.  Electrochemical properties of nanocrystalline LiFexMn2−xO4 (x = 0.2–1.0) cathode particles prepared by ultrasonic spray pyrolysis method , 2012 .

[13]  J. Flake,et al.  Low temperature preparation of crystalline ZrO2 coatings for improved elevated-temperature performances of Li-ion battery cathodes. , 2012, Chemical communications.

[14]  Tsutomu Ohzuku,et al.  High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g−1 , 2011 .

[15]  Martin Winter,et al.  Synthesis and electrochemical performance of the high voltage cathode material Li[Li0.2Mn0.56Ni0.16Co0.08]O2 with improved rate capability , 2011 .

[16]  G. P. Kalaignan,et al.  Synthesis and electrochemical characterizations of Nano-SiO2-coated LiMn2O4 cathode materials for rechargeable lithium batteries , 2008 .

[17]  Yong Yang,et al.  Structural and electrochemical characterization of xLi[Li1/3Mn2/3]O2·(1 − x)Li[Ni1/3Mn1/3Co1/3]O2 (0 ≤ x ≤ 0.9) as cathode materials for lithium ion batteries , 2008 .

[18]  John T. Vaughey,et al.  Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3·(1 − x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7) , 2008 .

[19]  De-cheng Li,et al.  A new approach to improve the high-voltage cyclic performance of Li-rich layered cathode material by electrochemical pre-treatment , 2008 .

[20]  T. Inagaki,et al.  Synthesis of matrix-type NiO-SDC composite particles by spray pyrolysis with acid addition for development of SOFC cermet anode , 2007 .

[21]  Jian-qing Zhang,et al.  Effects of the nanostructured SiO2 coating on the performance of LiNi0.5Mn1.5O4 cathode materials for high-voltage Li-ion batteries , 2007 .

[22]  Christopher S. Johnson,et al.  Anomalous capacity and cycling stability of xLi2MnO3 · (1 − x)LiMO2 electrodes (M = Mn, Ni, Co) in lithium batteries at 50 °C , 2007 .

[23]  H. Deguchi,et al.  Study on pyrolysing behavior of NiO-SDC composite particles prepared by spray pyrolysis technique , 2007 .

[24]  Jingyu Xi,et al.  Enhanced high-potential and elevated-temperature cycling stability of LiMn2O4 cathode by TiO2 modification for Li-ion battery , 2006 .

[25]  John T. Vaughey,et al.  The Effects of Acid Treatment on the Electrochemical Properties of 0.5 Li2MnO3 ∙ 0.5 LiNi0.44Co0.25Mn0.31O2 Electrodes in Lithium Cells , 2006 .

[26]  R. Holze,et al.  Cathode materials modified by surface coating for lithium ion batteries , 2006 .

[27]  M. Wakihara,et al.  Particle morphology and electrochemical performances of spinel LiMn2O4 powders synthesized using ultrasonic spray pyrolysis method , 2002 .

[28]  M. Yoshio,et al.  Enhancing the elevated temperature performance of Li/LiMn2O4 cells by reducing LiMn2O4 surface area , 2000 .

[29]  T. Ohzuku,et al.  Comparative study of LiCoO2, LiNi12Co12O2 and LiNiO2 for 4 volt secondary lithium cells , 1993 .

[30]  Guohua Chen,et al.  The effects of persulfate treatment on the electrochemical properties of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material , 2013 .