FOC and DTC comparison in PMSM for railway traction application

This paper presents a detailed comparison between two control strategies, field oriented control (FOC) and direct-torque control (DTC), in permanent-magnet synchronous machines (PMSM) for railway traction applications. The analysis is initially carried out in simulation, and some experimental results obtained from a 100 kW test bench are also included.

[1]  M.F. Rahman,et al.  A novel speed sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive , 2008, 2008 IEEE Power Electronics Specialists Conference.

[2]  J. Cusido,et al.  Torque ripple reduction in a PMSM driven by direct torque control , 2008, 2008 IEEE Power Electronics Specialists Conference.

[3]  E. Babaei,et al.  A new scheme to direct torque control of interior permanent magnet synchronous machine drives for constant inverter switching frequency and low torque ripple , 2011, 2011 International Conference on Electrical Machines and Systems.

[4]  Zdenek Peroutka,et al.  Control of permanent magnet synchronous machine wheel drive for low-floor tram , 2009, 2009 13th European Conference on Power Electronics and Applications.

[5]  Philippe Barret.  Machines synchrones, Fonctionnement en régime permanent , 1978 .

[6]  M. Depenbrock,et al.  Direct self-control (DSC) of inverter-fed induction machine , 1988 .

[7]  R. H. Staunton.  PM Motor Parametric Design Analyses for a Hybrid Electric Vehicle Traction Drive Application , 2004 .

[8]  A. Tani,et al.  Steady-state and transient performance evaluation of a DTC scheme in the low speed range , 2001 .

[9]  Joachim Holtz.  Pulsewidth modulation-a survey , 1992, IEEE Trans. Ind. Electron..

[10]  A. Tani,et al.  FOC and DTC: two viable schemes for induction motors torque control , 2002 .

[11]  Toshihiko Noguchi,et al.  A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor , 1986, IEEE Transactions on Industry Applications.

[12]  M. Depenbrock,et al.  Direct self control of inverter-fed induction machine, a basis for speed control without speed-measurement , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[13]  M.F. Rahman,et al.  A New Scheme to Direct Torque Control of Interior Permanent Magnet Synchronous Machine Drives for Constant Inverter Switching Frequency and Low Torque Ripple , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[14]  Andreas Steimel,et al.  Direct self control with minimum torque ripple and high dynamics for a double three-level GTO inverter drive , 2002, IEEE Trans. Ind. Electron..

[15]  P.N. Enjeti,et al.  Programmed PWM techniques to eliminate harmonics - A critical evaluation , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.