Syntactic foams from copolymers based on epoxidized soybean oil

[1]  M. Porfiri,et al.  Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foams , 2010 .

[2]  M. Porfiri,et al.  Effect of volume fraction and wall thickness on the elastic properties of hollow particle filled composites , 2009 .

[3]  C. Xie,et al.  Preparation and properties of hollow glass microsphere-filled epoxy-matrix composites , 2009 .

[4]  N. Gupta,et al.  Analysis of a functionally graded particulate composite under flexural loading conditions , 2008 .

[5]  Soojin Park,et al.  Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils , 2008 .

[6]  H. D. Jerro,et al.  Enhancing tensile strength and toughness in syntactic foams through nanoclay reinforcement , 2007 .

[7]  Kishore,et al.  Investigation of bending modulus of fiber‐reinforced syntactic foams for sandwich and structural applications , 2007 .

[8]  Kishore,et al.  Effects of microballoons’ size and content in epoxy on compressive strength and modulus , 2006 .

[9]  N. Gupta,et al.  Comparison of compressive properties of layered syntactic foams having gradient in microballoon volume fraction and wall thickness , 2006 .

[10]  H. D. Jerro,et al.  Investigation of flexural strength properties of rubber and nanoclay reinforced hybrid syntactic foams , 2006 .

[11]  Kishore,et al.  Gradient syntactic foams: Tensile strength, modulus and fractographic features , 2005 .

[12]  Kishore,et al.  Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features , 2005 .

[13]  M. Misra,et al.  Fracture toughness and impact strength of anhydride‐cured biobased epoxy , 2005 .

[14]  Kishore,et al.  Flexural behaviour of fibre-reinforced syntactic foams , 2005 .

[15]  M. Misra,et al.  Novel biobased nanocomposites from functionalized vegetable oil and organically-modified layered silicate clay , 2005 .

[16]  Richard P. Wool,et al.  Bio-based polymers and composites , 2005 .

[17]  H. Kim,et al.  Manufacturing and failure mechanisms of syntactic foam under compression , 2004 .

[18]  Manjusri Misra,et al.  Thermo‐Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 1 , 2004 .

[19]  Manjusri Misra,et al.  Thermo-Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 2† , 2004 .

[20]  P. Mensah,et al.  Compression properties of syntactic foams: effect of cenosphere radius ratio and specimen aspect ratio , 2003 .

[21]  Kishore,et al.  Compressive fracture features of syntactic foams-microscopic examination , 2002 .

[22]  A. P. Costa,et al.  Dynamic mechanical and thermal behavior of epoxy resins based on soybean oil , 2002 .

[23]  P. Stefani,et al.  Epoxy-urethane copolymers: Relation between morphology and properties , 2001 .

[24]  Kishore,et al.  Studies on compressive failure features in syntactic foam material , 2001 .

[25]  D. Ratna.  Mechanical properties and morphology of epoxidized soyabean-oil-modified epoxy resin , 2001 .

[26]  C. Fringant,et al.  Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners , 2000 .