Eliminating the Hook of the Lap Joint by Double-Side Friction Stir Welding
暂无分享,去创建一个
[1] Chuansong Wu,et al. Effects of tool pin thread on temperature field and material mixing in friction stir welding of dissimilar Al/Mg alloys , 2022, Journal of Manufacturing Processes.
[2] Yang Guo,et al. Enhancing the mechanical performances of friction stir lap welded Al-Zn-Mg-Cu alloy joint by promoting diffusion of alloying element Zn toward the pre-positioned Cu interlayer , 2022, Materials Science and Engineering: A.
[3] S. Ji,et al. A novel non-keyhole friction stir welding process , 2022, Journal of Manufacturing Processes.
[4] Xinhua Yang,et al. Study on the thermal-assisted friction stir lap welding for dissimilar materials of 6061-T6 Al alloy and thermoplastic PC , 2021 .
[5] Surjya K. Pal,et al. Mechanism of microstructure evolution and grain growth in friction stir welding of AA6061-T6 and AISI304 in air and water media , 2021 .
[6] Surjya K. Pal,et al. Effect of weld parameters on joint quality in friction stir welding of Mg alloy to DP steel dissimilar materials , 2021 .
[7] G. Grant,et al. Microstructure and mechanical properties of friction stir welded Haynes 282 , 2021, Materials Characterization.
[8] Y. Su,et al. Microstructural evolution and mechanical properties of the Al–Cu dissimilar joint enhanced by stationary-dynamic shoulder friction stir welding , 2021, Journal of Materials Processing Technology.
[9] H. Hou,et al. Effect of incomplete penetration defects on mechanical and fatigue properties of friction-stir-welded 6802-T6 joint , 2021, Journal of Materials Research and Technology.
[10] Zhenxiong Wei,et al. Study on aluminum foam sandwich welding by friction stir welding technology , 2021 .
[11] Xuefeng Guo,et al. Effect of welding parameters on the microstructures and mechanical properties of double-pass aluminum/magnesium dissimilar metal friction stir lap welding joint , 2021 .
[12] Q. Wen,et al. Friction stir diffusion welding realized by a novel tool with turbo-like pin , 2021 .
[13] Y. Morisada,et al. Elucidation of interfacial microstructure and properties in friction stir lap welding of aluminium alloy and mild steel , 2020 .
[14] Q. Wen,et al. A novel friction stir diffusion bonding process using convex-vortex pin tools , 2020 .
[15] S. Kheirandish,et al. Employing hooking and effective sheet thickness to achieve optimum failure load in lap joints of friction stir welded AA5456 aluminum , 2020 .
[16] S. Ji,et al. Improving interface morphology and shear failure load of friction stir lap welding by changing material concentrated zone location , 2018 .
[17] Zhengwei Li,et al. Effect of rotating speed on joint morphology and lap shear properties of stationary shoulder friction stir lap welded 6061-T6 aluminum alloy , 2017 .
[18] Zhengwei Li,et al. Reducing the Hook Defect of Friction Stir Lap Welded Ti-6Al-4V Alloy by Slightly Penetrating into the Lower Sheet , 2017, Journal of Materials Engineering and Performance.
[19] Min Wang,et al. Hook formation and mechanical properties of friction spot welding in alloy 6061-T6 , 2016 .
[20] Z. Ma,et al. Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg–Al–Zn alloy joints , 2015 .
[21] Wenya Li,et al. Improving mechanical properties of pinless friction stir spot welded joints by eliminating hook defect , 2014 .
[22] N. Sun,et al. Hook formation and mechanical properties in AZ31 friction stir spot welds , 2010 .
[23] N. Sun,et al. Microstructures and mechanical properties in dissimilar AZ91/AZ31 spot welds , 2010 .
[24] X. Li,et al. Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets , 2009 .