A comparison among some recent energy- and stress-based criteria for the fracture assessment of sharp V-notched components under Mode I loading

Abstract Fracture assessment of components weakened by sharp V-notches is typically carried out by means of the Notch Stress Intensity Factors (NSIFs), which quantify the asymptotic linear elastic stress field in the vicinity of the notch tip. Since units of the NSIFs do depend on the V-notch opening angle, a direct comparison in terms of the NSIFs needs the constancy of the opening angle. A criterion based on the strain energy density (SED) averaged over a material-dependent control volume surrounding the notch tip has been proposed by the authors. When the control volume is small enough to make negligible the influence of higher order terms of Williams’ solution, the SED can be theoretically linked to the NSIFs. Considering Mode I loading conditions, the expression of the critical Mode I NSIF at failure as a function of the V-notch opening angle as derived according to the averaged SED criterion is compared with those given by two different versions of the Finite Fracture Mechanics (FFM) criterion, the former due to Leguillon, the latter due to Carpinteri et alii. Finally, the considered criteria are applied to components weakened by sharp V-notches under Mode I loading conditions in order to investigate the predictive capability of each approach. A number of experimental data taken from the literature are used for comparison.

[1]  M. Ayatollahi,et al.  Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion , 2012 .

[2]  Guy Pluvinage,et al.  The use of notch stress intensity factor as a fatigue crack initiation parameter , 1995 .

[3]  Filippo Berto,et al.  Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches , 2014 .

[4]  Alberto Carpinteri,et al.  Stress-singularity and generalized fracture toughness at the vertex of re-entrant corners , 1987 .

[5]  Filippo Berto,et al.  Brittle failures from U- and V-notches in mode I and mixed, I + II, mode: a synthesis based on the strain energy density averaged on finite-size volumes , 2009 .

[6]  M. Williams,et al.  Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension , 1952 .

[7]  A. Kotousov,et al.  Three dimensional finite element mixed fracture mode under anti-plane loading of a crack , 2012 .

[8]  Y. Alizadeh,et al.  The effect of notch depth on J-integral and critical fracture load in plates made of functionally graded aluminum–silicone carbide composite with U-notches under bending , 2010 .

[9]  Zohar Yosibash,et al.  Crack onset at a v-notch. Influence of the notch tip radius , 2003 .

[10]  F. J. Gómez,et al.  Fracture loads for ceramic samples with rounded notches , 2006 .

[11]  David Taylor,et al.  Geometrical effects in fatigue: a unifying theoretical model , 1999 .

[12]  K. Tanaka,et al.  Engineering formulae for fatigue strength reduction due to crack-like notches , 1983 .

[13]  G. Irwin.  ANALYSIS OF STRESS AND STRAINS NEAR THE END OF A CRACK TRAVERSING A PLATE , 1957 .

[14]  Filippo Berto,et al.  Generalised Neuber Concept of Fictitious Notch Rounding , 2013 .

[15]  J-integral evaluation for U- and V-blunt notches under Mode I loading and materials obeying a power hardening law , 2007 .

[16]  M. Ayatollahi,et al.  Mixed mode fracture analysis of polycrystalline graphite – A modified MTS criterion , 2008 .

[17]  Martin L. Dunn,et al.  Fracture initiation at sharp notches under mode I, mode II, and mild mixed mode loading , 1997 .

[18]  Bernard Gross,et al.  Plane elastostatic analysis of V-notched plates , 1972 .

[19]  David Taylor,et al.  The theory of critical distances to predict static strength of notched brittle components subjected to mixed-mode loading , 2008 .

[20]  E. Beltrami,et al.  Sulle condizioni di resistenza dei corpi elastici , 1885 .

[21]  Filippo Berto,et al.  Fictitious Notch Rounding approach of pointed V-notch under in-plane shear , 2010 .

[22]  Guy Pluvinage,et al.  Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials , 1994 .

[23]  Paolo Lazzarin,et al.  A NOTCH INTENSITY FACTOR APPROACH TO THE STRESS ANALYSIS OF WELDS , 1998 .

[24]  David Taylor,et al.  A finite fracture mechanics approach to structures with sharp V-notches , 2008 .

[25]  A. Gradin,et al.  A Fracture Criterion for Edge-Bonded Bimaterial Bodies , 1982 .

[26]  Paolo Lazzarin,et al.  A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches , 1996 .

[27]  Zohar Yosibash,et al.  Failure criteria for brittle elastic materials , 2004 .

[28]  Zenon Mróz,et al.  A non-local stress failure condition for structural elements under multiaxial loading , 1995 .

[29]  Paolo Livieri,et al.  Use of J-integral to predict static failures in sharp V-notches and rounded U-notches , 2008 .

[30]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[31]  Pietro Cornetti,et al.  A Finite Fracture Mechanics approach to V-notched elements subjected to mixed-mode loading , 2013 .

[32]  Filippo Berto,et al.  Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the microstructural support factor for different failure hypotheses. Part I: Basic stress equations , 2008 .

[33]  Filippo Berto,et al.  Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the microstructural support factor for different failure hypotheses: Part II: Microstructural support analysis , 2009 .

[34]  Dominique Leguillon,et al.  Strength or toughness? A criterion for crack onset at a notch , 2002 .

[35]  Andrzej Seweryn,et al.  Brittle fracture criterion for structures with sharp notches , 1994 .

[36]  Paul A. Wawrzynek,et al.  3-D simulation of arbitrary crack growth using an energy-based formulation – Part II: Non-planar growth , 2014 .

[37]  H. Neuber,et al.  Theorie der technischen Formzahl , 1936 .

[38]  Filippo Berto,et al.  Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications , 2010 .

[39]  Roberto Tovo,et al.  Stress field parameters to predict the fatigue strength of notched components , 1999 .

[40]  G. C. Sih,et al.  Sharp notch fracture strength characterized by critical energy density , 1991 .

[41]  M. E. Haddad,et al.  Prediction of non propagating cracks , 1979 .

[42]  Paolo Lazzarin,et al.  A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches , 2001 .

[43]  F. J. Gómez,et al.  Generalizations and specializations of cohesive crack models , 2003 .

[44]  Zdeněk Knésl,et al.  A criterion of V-notch stability , 1991 .

[45]  Roberto Tovo,et al.  Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity , 1997 .

[46]  Alberto Carpinteri,et al.  Finite fracture mechanics: A coupled stress and energy failure criterion , 2006 .

[47]  David Taylor,et al.  The Theory of Critical Distances to estimate the static strength of notched samples of Al6082 loaded in combined tension and torsion. Part I: Material cracking behaviour , 2010 .

[48]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[49]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[50]  Andrei Kotousov,et al.  Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading , 2012 .

[51]  Majid R. Ayatollahi,et al.  A modified MTS criterion (MMTS) for mixed-mode fracture toughness assessment of brittle materials , 2010 .

[52]  Martin L. Dunn,et al.  Fracture initiation at sharp notches: Correlation using critical stress intensities , 1997 .

[53]  M. Elices,et al.  The cohesive zone model: advantages, limitations and challenges , 2002 .

[54]  S. Oyadiji,et al.  Strain energy approach to compute stress intensity factors for isotropic homogeneous and bi-material V-notches , 2013 .

[55]  Zohar Yosibash,et al.  A failure criterion for brittle elastic materials under mixed-mode loading , 2006 .

[56]  Paolo Lazzarin,et al.  From a local stress approach to fracture mechanics: a comprehensive evaluation of the fatigue strength of welded joints , 1999 .

[57]  Dominique Leguillon,et al.  A criterion for crack nucleation at a notch in homogeneous materials , 2001 .

[58]  Filippo Berto,et al.  A review of the volume-based strain energy density approach applied to V-notches and welded structures , 2009 .

[59]  F. J. Gómez,et al.  Fracture of components with V-shaped notches , 2003 .

[60]  Filippo Berto,et al.  Some advantages derived from the use of the strain energy density over a control volume in fatigue strength assessments of welded joints , 2008 .

[61]  Yves Verreman,et al.  Early development of fatigue cracking at manual fillet welds , 1996 .

[62]  V. V. Novozhilov,et al.  On a necessary and sufficient criterion for brittle strength: PMM vol. 33, n≗2, 1969, pp. 212–222 , 1969 .

[63]  Andrzej Seweryn,et al.  BRITTLE FRACTURE IN PLANE ELEMENTS WITH SHARP NOTCHES UNDER MIXED-MoDE LOADING , 1997 .