Investigation of stretch on air permeability of knitted fabric part I: effect of spinning system

Air permeability of knitted fabrics is normally measured for the samples in their unstretched state. But, this air permeability values indicate the ability of these garments to allow air through them when they are not in use. But, the real-time condition is different and certainly the knitted garments mentioned above will subject to a degree of stretch during their usage. So, the measurement of air permeability under stretch and the fabric properties which would influence the air permeability of weft-knitted fabrics in their stretched state is of paramount importance. The paper aims to discuss these issues.,The aim of this research work is to investigate the change in air permeability values under the incremental extension of cotton tubular weft-knitted fabrics produced from the yarns of different spinning systems.,From the results, it is evident that the pique fabric samples of compact spun yarn displayed the highest air permeability values during the incremental stretch at all the three relaxation states. It is followed by the pique samples of ring spun yarn. Next to pique samples, the jersey samples made from the compact yarn and ring spun yarn revealed more air permeability, respectively. The core spun pique samples and core spun jersey samples displayed the least air permeability values, respectively. But, the pique and jersey samples made up of ring yarn and compact yarn showed gradual reduction in their air permeability towards the incremental stretch and the core spun pique samples and core spun jersey samples were uniformly seen with gradual increase in their air permeability during the incremental stretch.,Very limited quantity of research has been carried out in this area. So, a novel attempt has been made in this research work to investigate the influence of incremental stretch on air permeability of single knit structures.

[1]  A. Marmaralı Dimensional and Physical Properties of Cotton/Spandex Single Jersey Fabrics , 2003 .

[2]  Arzu Marmarali,et al.  HEAT, AIR AND WATER VAPOR TRANSFER PROPERTIES OF CIRCULAR KNITTED SPACER FABRICS , 2011 .

[3]  K. Thangamani,et al.  Establishing the Effect of Loop Length on Dimensional Stability of Single Jersey Knitted Fabric made from Cotton/lycra Core Spun Yarn , 2010 .

[4]  P. Kerpauskas,et al.  Investigation on Thermal Properties of Double-Layered Weft Knitted Fabrics , 2012 .

[5]  Kai Yang,et al.  Analysis and Prediction of the Dynamic Heat - Moisture Comfort Property of Fabric , 2008 .

[6]  J. Knapton,et al.  The Dimensional Properties of Knitted Wool Fabrics , 1970 .

[7]  B. P. Saville,et al.  Physical Testing of Textiles , 1999 .

[8]  G. Ramakrishnan,et al.  Effect of Blend Ratio, Loop Length, and Yarn Linear Density on Thermal Comfort Properties of Single Jersey Knitted Fabrics , 2013 .

[9]  B. Wilbik-Hałgas,et al.  Air and Water Vapour Permeability in Double - Layered Knitted Fabrics with Different Raw Materials , 2006 .

[10]  B. Karaguzel Characterization and Role of Porosity in Knitted Fabrics , 2004 .

[11]  Ryuzo Oinuma Effect of Stitch Length on Some Properties of Cotton 1×1 Rib Knitted Fabrics , 1990 .

[12]  A. Catarino,et al.  The Influence of Knitted Fabrics’ Structure on the Thermal and Moisture Management Properties , 2011 .

[13]  G. Ramakrishnan,et al.  Effect of blend proportion on thermal behaviour of bamboo knitted fabrics , 2013 .

[14]  G. Ramakrishnan,et al.  Effect of Plasma Treatment on Air and Water-Vapor Permeability of Bamboo Knitted Fabric , 2013 .