Effects of particle size on the fast pyrolysis of oil mallee woody biomass

This study aims to investigate the effects of biomass particle size (0.18–5.6 mm) on the yield and composition of bio-oil from the pyrolysis of Australian oil mallee woody biomass in a fluidised-bed reactor at 500 °C. The yield of bio-oil decreased as the average biomass particle size was increased from 0.3 to about 1.5 mm. Further increases in biomass particle size did not result in any further decreases in the bio-oil yield. These results are mainly due to the impact of particle size in the production of lignin-derived compounds. Possible inter-particle interactions between bio-oil vapour and char particles or homogeneous reactions in vapour phases were not responsible for the decreases in the bio-oil yield. The bio-oil samples were characterised with thermogravimetric analysis, UV-fluorescence spectroscopy, Karl–Fischer titration as well as precipitation in cold water. It was found that the yields of light bio-oil fractions increased and those of heavy bio-oil fractions decreased with increasing biomass particle size. The formation of pyrolytic water at low temperatures (<500 °C) is not greatly affected by temperature or particle size. It is believed that decreased heating rates experienced by large particles are a major factor responsible for the lower bio-oil yields from large particles and for the changes in the overall composition of resulting oils. Changes in biomass cell structure during grinding may also influence the yield and composition of bio-oil.

[1]  Chun-Zhu Li,et al.  UV-Fluorescence Spectroscopy of Coal Pyrolysis Tars , 1994 .

[2]  Hongwei Wu,et al.  Production of Mallee Biomass in Western Australia : Energy Balance Analysis , 2008 .

[3]  D. Meier,et al.  Characterization of the water-insoluble fraction from fast pyrolysis liquids (pyrolytic lignin) , 2001 .

[4]  Woojin Lee,et al.  Fast pyrolysis of Oil Mallee Woody Biomass : Effect of temperature on the yield and quality of pyrolysis products , 2008 .

[5]  A. Bridgwater,et al.  Overview of Applications of Biomass Fast Pyrolysis Oil , 2004 .

[6]  S. Şensöz,et al.  Olive bagasse (Olea europea L.) pyrolysis. , 2006, Bioresource technology.

[7]  Ayşe Eren Pütün,et al.  Fast pyrolysis of sesame stalk: yields and structural analysis of bio-oil , 2004 .

[8]  Anthony V. Bridgwater,et al.  Principles and practice of biomass fast pyrolysis processes for liquids , 1999 .

[9]  L. Stocker,et al.  Agriculture for Health and Profit in Western Australia: The Western Oil Mallee Project , 2001 .

[10]  R. Kandiyoti,et al.  Characterization of biomass pyrolysis tars produced in the relative absence of extraparticle secondary reactions , 1991 .

[11]  A. Chaala,et al.  Characterization of bio-oils in chemical families , 2007 .

[12]  D. Meier,et al.  State of the art of applied fast pyrolysis of lignocellulosic materials - a review , 1999 .

[13]  J. Pettersson,et al.  Optical and Mass Spectrometric Study of the Pyrolysis Gas of Wood Particles , 2003, Applied spectroscopy.

[14]  S. Şensöz,et al.  Influence of particle size on the pyrolysis of rapeseed (Brassica napus L.): fuel properties of bio-oil , 2000 .

[15]  Dietrich Meier,et al.  Characterization of the water-insoluble fraction from pyrolysis oil (pyrolytic lignin). Part I. PY–GC/MS, FTIR, and functional groups , 2001 .

[16]  D. Mohan,et al.  Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review , 2006 .

[17]  Ö. Onay.  Production of Bio-Oil from Biomass: Slow Pyrolysis of Rapeseed (Brassica napus L.) in a Fixed-Bed Reactor , 2003 .

[18]  Young-Kwon Park,et al.  Fast pyrolysis of radiata pine in a bench scale plant with a fluidized bed: Influence of a char separation system and reaction conditions on the production of bio-oil , 2006 .

[19]  Anja Oasmaa,et al.  Fuel oil quality of biomass pyrolysis oils-state of the art for the end users , 1999 .

[20]  Wolter Prins,et al.  Biomass Pyrolysis in a Fluidized Bed Reactor. Part 1: Literature Review and Model Simulations , 2005 .

[21]  Chun-Zhu Li,et al.  Primary Release of Alkali and Alkaline Earth Metallic Species during the Pyrolysis of Pulverized Biomass , 2005 .

[22]  A. Bridgwater,et al.  An overview of fast pyrolysis of biomass , 1999 .

[23]  E. Pütün,et al.  Rapid Pyrolysis of Olive Residue. 1. Effect of Heat and Mass Transfer Limitations on Product Yields and Bio-oil Compositions , 2007 .

[24]  R. Cunningham,et al.  The suitability of five Western Australian mallee eucalypt species for wood-cement composites , 2002 .

[25]  Wolter Prins,et al.  Biomass Pyrolysis in a Fluidized Bed Reactor. Part 2: Experimental Validation of Model Results , 2005 .

[26]  Woojin Lee,et al.  Effects of Temperature on the Formation of Lignin-Derived Oligomers during the Fast Pyrolysis of Mallee Woody Biomass , 2008 .

[27]  Colomba Di Blasi,et al.  Modeling intra- and extra-particle processes of wood fast pyrolysis , 2002 .

[28]  A. Pütün,et al.  Fast pyrolysis of soybean cake: product yields and compositions. , 2006, Bioresource technology.

[29]  William A. Peters,et al.  Heterogeneous cracking of wood pyrolysis tars over fresh wood char surfaces , 1989 .

[30]  Özlem Onay,et al.  Pyrolysis of rapeseed in a free fall reactor for production of bio-oil , 2006 .

[31]  Chun-Zhu Li.  Some recent advances in the understanding of the pyrolysis and gasification behaviour of Victorian brown coal , 2007 .

[32]  Jun-ichiro Hayashi,et al.  Volatilisation of alkali and alkaline earth metallic species during the pyrolysis of biomass: differences between sugar cane bagasse and cane trash. , 2005, Bioresource technology.

[33]  Piotr Majerski,et al.  A second look at fast pyrolysis of biomass—the RTI process , 1999 .

[34]  Chun-Zhu Li,et al.  Effects of Heating Rate and Ion-Exchangeable Cations on the Pyrolysis Yields from a Victorian Brown Coal , 1999 .

[35]  Anja Oasmaa,et al.  Characterization of biomass-based flash pyrolysis oils , 1998 .

[36]  Franco Berruti,et al.  A gas-solid reaction model for flash wood pyrolysis , 1989 .