Simulation of phase-change random access memory with ring-type contactor for low reset current by finite element modelling

A three-dimensional finite element models for phase change random access memory (PCRAM) is established to simulate thermal and electrical behaviours during RESET operation. The RESET behaviours of the conventional structure (CS) and the ring-type contact in bottom electrode (RIB) are compared with each other. The simulation results indicate that the RIB cell has advantages of high heat efficiency for melting phase change material in cell, reduction of contact area and lower RESET current with maintaining good resistance contrast. The RESET current decreases from 1.26mA to 1.2mA and the heat consumption in GST material during programming increases from 12% to 37% in RIB structure. Thus the RIB structure PCRAM cell is suitable for future device with high heat efficiency and smaller RESET current.

[1]  J. González-Hernández,et al.  Structural, electric and kinetic parameters of ternary alloys of GeSbTe , 2005 .

[2]  Dae-Hwan Kang,et al.  An experimental investigation on the switching reliability of a phase change memory device with an oxidized TiN electrode , 2006 .

[3]  Dae-Hwang Kim,et al.  Three-dimensional simulation model of switching dynamics in phase change random access memory cells , 2007 .

[4]  Modeling of Two Different Operation Modes of Phase Change Material for Phase-Change Random-Access Memory , 2005 .

[5]  J. F. Webb,et al.  One-dimensional heat conduction model for an electrical phase change random access memory device with an 8F2 memory cell (F=0.15 μm) , 2003 .

[6]  C. Peng,et al.  Experimental and theoretical investigations of laser-induced crystallization and amorphization in phase-change optical recording media , 1997 .

[7]  Sumio Hosaka,et al.  Simulation of Proposed Confined-Chalcogenide Phase-Change Random Access Memory for Low Reset Current by Finite Element Modelling , 2006 .

[8]  Young-Tae Kim,et al.  Ge2Sb2Te5 Confined Structures and Integration of 64 Mb Phase-Change Random Access Memory , 2005 .

[9]  Simulation for Reset Operation of Ge2Sb2Te5 Phase-Change Random Access Memory , 2005 .

[10]  Kinam Kim,et al.  Programming Characteristics of Phase Change Random Access Memory Using Phase Change Simulations , 2005 .

[11]  D. Kuhlmann-wilsdorf,et al.  Does plastic deformation proceed near thermodynamic equilibrium? The case made for shear-strained lamellar diblock copolymers , 1999 .