Comparative performance of an adiabatic and a nonadiabatic PSA process for bulk gas separation—a numerical simulation

A detailed numerical model of a Skarstrom-like PSA process is used to investigate the separation performance of an adiabatic and a non-adiabatic process for removal of bulk CO2 impurity from inert He. The complexity of the gas phase adsorbate composition, adsorbate loading, and the adsorbent temperature profiles as functions of positions inside an adsorber at the start and end of each step of the PSA process are discussed. The separation performance of a non-adiabatic PSA process is generally inferior to that of the corresponding adiabatic process. Smaller adsorbent column diameter accentuates non-adiabatic operation and hence lower separation efficiency. Furthermore, the separation efficiency decreases more rapidly at short cycle times and smaller column diameters. Insulation of PSA columns of a process development unit operated under these conditions is recommended for reliable data analysis. This article is protected by copyright. All rights reserved.

[1]  M. Kothare,et al.  Column Dynamic Study of Mass Transfer of Pure N2 and O2 into Small Particles of Pelletized LiLSX Zeolite , 2014 .

[2]  Shivaji Sircar,et al.  Simultaneous Production of Hydrogen and Carbon Dioxide from Steam Reformer Off-Gas by Pressure Swing Adsorption , 1988 .

[3]  Shivaji Sircar,et al.  Separation of Methane and Carbon Dioxide Gas Mixtures by Pressure Swing Adsorption , 1988 .

[4]  Ravi Kumar,et al.  Adiabatic adsorption of bulk binary gas mixtures. Analysis by constant pattern model , 1983 .

[5]  Jeffrey Raymond Hufton,et al.  Why Does the Linear Driving Force Model for Adsorption Kinetics Work? , 2000 .

[6]  Isothermal and Isobaric Desorption of Carbon Dioxide by Purge , 1995 .

[7]  S. Ergun.  Fluid flow through packed columns , 1952 .

[8]  J. Hufton,et al.  Intraparticle adsorbate concentration profile for linear driving force model , 2000 .

[9]  S. Hyun,et al.  Equilibrium adsorption of ethane, ethylene, isobutane, carbon dioxide, and their binary mixtures on 13X molecular sieves , 1982 .

[10]  Regina de Fátima Peralta Muniz Moreira,et al.  Modeling of the fixed - bed adsorption of carbon dioxide and a carbon dioxide - nitrogen mixture on zeolite 13X , 2011 .

[11]  M. Kothare,et al.  Equilibrium isotherm and mass transfer coefficient for adsorption of pure argon on small particles of pelletized lithium-exchanged low silica X zeolite , 2015 .

[12]  J. A. Ritter,et al.  Periodic State Heat Effects in Pressure Swing Adsorption-Solvent Vapor Recovery , 1998 .

[13]  D. Gelbin,et al.  Heat and mass transfer in packed beds—III. Axial mass dispersion , 1978 .

[14]  M. Kothare,et al.  Rapid Pressure Swing Adsorption for Reduction of Bed Size Factor of a Medical Oxygen Concentrator , 2011 .

[15]  S. Sircar,et al.  Skin resistance for adsorbate mass transfer into extruded adsorbent pellets , 1986 .

[16]  Mayuresh V. Kothare,et al.  Anatomy of a rapid pressure swing adsorption process performance , 2015 .

[17]  Stuart W. Churchill,et al.  Correlating equations for laminar and turbulent free convection from a horizontal cylinder , 1975 .