论文信息 - DC Standstill Torque Used to Measire Lq of Reluctance and Synchronous Machines

DC Standstill Torque Used to Measire Lq of Reluctance and Synchronous Machines

An experimental method for measuring the quadrature axis inductance (Lq) of polyphase synchronous machines is developed. It is based on a measurement of developed torque with the rotor at standstill and with the stator winding supplied with dc currents. While applicable to all synchronous machines, it is developed and explained for reluctance motors primarily. Special techniques are used to minimize measurement errors due to hysteresis and due to air gap permeance harmonics. Detailed results are presented for one reluctance motor which has a highly variable Lq, and correlation with other methods is found to be quite good. The effects of saturation are observed, and Lq is found to depend on quadrature axis current in the tested motor, with direct axis current having a slight effect on Lq at larger currents.

E. Klingshirn

[1] C. V. Jones,et al. An analysis of commutation for the unified-machine theory , 1958 .

[2] P. J. Lawrenson,et al. Theory and performance of polyphase reluctance machines , 1964 .

[3] Vernon B. Honsinger,et al. Steady-State Performance of Reluctance Machines , 1971 .

[4] Vernon B. Honsinger,et al. The Inductances Ld and Lq of Reluctance Machines , 1971 .

[5] R. W. Menzies,et al. Theory and Operation of Reluctance Motors with Magnetically Anisotropic Rotors Part I Analysis , 1972 .

[6] Vernon B. Honsinger. Inherently Stable Reluctance Motors Having Improved Performance , 1972 .

[7] M. Rashid,et al. Voltage-time integral method for measuring machine inductance , 1974 .

[8] B. Mellitt,et al. Voltage-time integral method of inductance measurement , 1975 .

[9] T.A. Lipo,et al. Steady-state analysis of a current source inverter/reluctance motor driveߞ Part II: Experimental and analytical results , 1977, IEEE Transactions on Power Apparatus and Systems.