Five Parameter PV Model Extraction and Improvement Based on Experimental Data

This paper presents a new approach of the single diode five parameters model extraction and performance evaluation. The proposed model is capable of analytically describing the I–V and P–V characteristics of a PV module in different conditions. The PV parameters identify, mainly, the accuracy of any PV model. The proposed model constructed in a method to be in a sounds level of accuracy and far from complication. In term of accuracy, different evaluation criteria have being used in this study, and results of all criteria showed merit level of accuracy comparison to those in the compared models. In addition, the performance of the five parameters has been improved and this improvement showed in the I–V and P–V characteristics. Effect of these five parameters on all of the maximum power point (MPP), short circuit current (Isc), and open circuit voltage (Voc) also showed in the results. The outcomes of this study could help in improving the total PV system performance and could be a guide for method of extraction the five parameters model, since it dependent mainly on real results.

[1]  Andrew Blakers,et al.  Constant voltage I-V curve flash tester for solar cells , 2004 .

[2]  Giuseppina Ciulla,et al.  An efficient analytical approach for obtaining a five parameters model of photovoltaic modules using only reference data , 2013 .

[3]  Ali Naci Celik,et al.  Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter models , 2007 .

[4]  Kashif Ishaque,et al.  An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE) , 2011 .

[5]  R Khezzar,et al.  Modeling improvement of the four parameter model for photovoltaic modules , 2014 .

[6]  Gabriel Cibira,et al.  Photovoltaic module parameters acquisition model , 2014 .

[7]  Wenyin Gong,et al.  Parameter extraction of solar cell models using repaired adaptive differential evolution , 2013 .

[8]  F.Z. Peng,et al.  Analytical Model for a Photovoltaic Module using the Electrical Characteristics provided by the Manufacturer Data Sheet , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[9]  Keith Hoffman,et al.  Real-time simulation of photovoltaic modules , 1996 .

[10]  N. Rajasekar,et al.  Bacterial Foraging Algorithm based solar PV parameter estimation , 2013 .

[11]  Alireza Maheri,et al.  An accurate method for the PV model identification based on a genetic algorithm and the interior-point method , 2014 .

[12]  A. Ortiz-Conde,et al.  New method to extract the model parameters of solar cells from the explicit analytic solutions of their illuminated I–V characteristics , 2006 .

[13]  D. Chan,et al.  Analytical methods for the extraction of solar-cell single- and double-diode model parameters from I-V characteristics , 1987, IEEE Transactions on Electron Devices.

[14]  Yanhong Luo,et al.  Hole-conductor-free perovskite organic lead iodide heterojunction thin-film solar cells: High efficiency and junction property , 2014 .

[15]  Giuseppina Ciulla,et al.  An improved five-parameter model for photovoltaic modules , 2010 .

[16]  N. K. Gautam,et al.  Simulation model for sizing of stand-alone solar PV system with interconnected array , 2005 .

[17]  Jae Hyun Kim,et al.  Intensity dependency of photovoltaic cell parameters under high illumination conditions: An analysis , 2014 .