Continuation-Based Pull-In and Lift-Off Simulation Algorithms for Microelectromechanical Devices

The voltages at which microelectromechanical actuators and sensors become unstable, known as pull-in and lift-off voltages, are critical parameters in microelectromechanical systems (MEMS) design. The state-of-the-art MEMS simulators compute these parameters by simply sweeping the voltage, leading to either excessively large computational cost or to convergence failure near the pull-in or lift-off points. This paper proposes to simulate the behavior at pull-in and lift-off employing two continuation-based algorithms. The first algorithm appropriately adapts standard continuation methods, providing a complete set of static solutions. The second algorithm uses continuation to trace two kinds of curves and generates the sweep-up or sweep-down curves, which can provide more intuition for MEMS designers. The algorithms presented in this paper are robust and suitable for general-purpose industrial MEMS designs. Our algorithms have been implemented in a commercial MEMS/integrated circuits codesign tool, and their effectiveness is validated by comparisons against measurement data and the commercial finite-element/boundary-element (FEM/BEM) solver CoventorWare.

[1]  Tsu-Jae King Liu,et al.  Design, Optimization, and Scaling of MEM Relays for Ultra-Low-Power Digital Logic , 2011, IEEE Transactions on Electron Devices.

[2]  Jacob K. White,et al.  A relaxation/multipole-accelerated scheme for self-consistent electromechanical analysis of complex 3-D microelectromechanical structures , 1993, Proceedings of 1993 International Conference on Computer Aided Design (ICCAD).

[3]  L. Chua,et al.  Tracing solution curves of nonlinear equa-tions with sharp turning points , 1984 .

[4]  G. Rezazadeh,et al.  Application of the Generalized Differential Quadrature Method to the Study of Pull-In Phenomena of MEMS Switches , 2007, Journal of Microelectromechanical Systems.

[5]  Vladimir Stojanovic,et al.  Integrated circuit design with NEM relays , 2008, 2008 IEEE/ACM International Conference on Computer-Aided Design.

[6]  S. Senturia,et al.  Self-consistent simulation and modelling of electrostatically deformed diaphragms , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[7]  Farrokh Ayazi,et al.  Micromachined inertial sensors , 1998, Proc. IEEE.

[8]  Willy Govaerts,et al.  MATCONT: A MATLAB package for numerical bifurcation analysis of ODEs , 2003, TOMS.

[9]  C. Nguyen,et al.  Design of low actuation voltage RF MEMS switch , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[10]  Tsu-Jae King Liu,et al.  4-terminal relay technology for complementary logic , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[11]  Danny C. Sorensen,et al.  Deflation Techniques for an Implicitly Restarted Arnoldi Iteration , 1996, SIAM J. Matrix Anal. Appl..

[12]  H. Yie,et al.  Convergence properties of relaxation versus the surface-Newton generalized-conjugate residual algorithm for self-consistent electromechanical analysis of 3-D micro-electro-mechanical structures , 1994, Proceedings of International Workshop on Numerical Modeling of processes and Devices for Integrated Circuits: NUPAD V.

[13]  Tamal Mukherjee,et al.  Design automation issues for biofluidic microchips , 2005, ICCAD-2005. IEEE/ACM International Conference on Computer-Aided Design, 2005..

[14]  G Lorenz,et al.  Network-Type Modeling of Micromachined Sensor Systems , 1998 .

[15]  Gerhard Wachutka,et al.  Multi-parameter homotopy for the numerical analysis of mems , 2004 .

[16]  J. Stulemeijer,et al.  Efficient electrostatic-mechanical modeling of C-V curves of RF-MEMS switches , 2007, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.

[17]  Danny C. Sorensen,et al.  Implicit Application of Polynomial Filters in a k-Step Arnoldi Method , 1992, SIAM J. Matrix Anal. Appl..

[18]  O. Degani,et al.  Pull-in study of an electrostatic torsion microactuator , 1998 .

[19]  Jessika Eichel.  Practical Bifurcation And Stability Analysis From Equilibrium To Chaos , 2016 .

[20]  A. S. Morris,et al.  Tunable capacitor series/shunt design for integrated tunable wireless front end applications , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[21]  Hee Jung Lee,et al.  MEMS system design and verification tools , 1998, Smart Structures.

[22]  N. Aluru,et al.  Analysis of Hybrid Electrothermomechanical Microactuators With Integrated Electrothermal and Electrostatic Actuation , 2009, Journal of Microelectromechanical Systems.

[23]  Qi Jing,et al.  A hierarchical circuit-level design methodology for microelectromechanical systems , 1999 .

[24]  Romesh C. Batra,et al.  Symmetry breaking, snap-through and pull-in instabilities under dynamic loading of microelectromechanical shallow arches , 2009 .

[25]  Stephane Rouvillois,et al.  Novel 3D modeling methods for virtual fabrication and EDA compatible design of MEMS via parametric libraries , 2010 .

[26]  John A. Pelesko,et al.  Mathematical Analysis of Electrostatically Actuated MEMS Devices , 2000 .

[27]  G. Fedder,et al.  Structured Design Of Microelectromechanical Systems , 1997, Proceedings of the 34th Design Automation Conference.

[28]  L. Daniel,et al.  New simulation and experimental methodology for analyzing pull-in and release in MEMS switches , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[29]  Vladimir Stojanovic,et al.  Demonstration of integrated micro-electro-mechanical switch circuits for VLSI applications , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[30]  S. Senturia.  Microsystem Design , 2000 .

[31]  Jian Liu,et al.  NONLINEAR DYNAMICS OF A DUAL-BACKPLATE CAPACITIVE MEMS MICROPHONE , 2007 .

[32]  D. Elata.  Modeling the Electromechanical Response of RF-MEMS Switches , 2006, EuroSime 2006 - 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems.

[33]  Kristofer S. J. Pister,et al.  MEMS SIMULATION USING SUGAR v0.5 , 1998 .

[34]  Jacob K. White,et al.  A computer-aided design system for microelectromechanical systems (MEMCAD) , 1992 .

[35]  Robert Puers,et al.  Pull-in voltage analysis of electrostatically actuated beam structures with fixed–fixed and fixed–free end conditions , 2002 .

[36]  S. Cunningham,et al.  Planar MEMS RF capacitor integration , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[37]  Jaijeet S. Roychowdhury,et al.  Delivering global DC convergence for large mixed-signal circuits via homotopy/continuation methods , 2006, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[38]  Yu-Wei Lin,et al.  Series-resonant micromechanical resonator oscillator , 2003, IEEE International Electron Devices Meeting 2003.

[39]  L. J. Hornbeck,et al.  Digital Light Processing and MEMS: an overview , 1996, Digest IEEE/Leos 1996 Summer Topical Meeting. Advanced Applications of Lasers in Materials and Processing.