Three-dimensional transient numerical study on latent heat thermal storage for waste heat recovery from a low temperature gas flow

[1]  Bernd Epple,et al.  Progress in dynamic simulation of thermal power plants , 2017 .

[2]  M. Prieto,et al.  Fluid flow and heat transfer in PCM panels arranged vertically and horizontally for application in heating systems , 2016 .

[3]  Luisa F. Cabeza,et al.  Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review , 2016 .

[4]  Kai Wang,et al.  Stirling cycle engines for recovering low and moderate temperature heat: A review , 2016 .

[5]  F. Haghighat,et al.  Air-PCM heat exchanger for peak load management: Experimental and simulation , 2016 .

[6]  Falah Alobaid,et al.  Investigation on the dynamic behaviour of a parabolic trough power plant during strongly cloudy days , 2016 .

[7]  Guoqiang Zhang,et al.  A new utilization approach of the waste heat with mid-low temperature in the combined heating and power system integrating heat pump , 2015 .

[8]  Muhammad Fairuz Remeli,et al.  Passive heat recovery system using combination of heat pipe and thermoelectric generator , 2015 .

[9]  Luisa F. Cabeza,et al.  Industrial waste heat recovery technologies: An economic analysis of heat transformation technologies , 2015 .

[10]  M. Olcese,et al.  Experimental and Numerical Investigation of a Pilot Scale Latent Heat Thermal Energy Storage for CSP Power Plant , 2015 .

[11]  Hailong Li,et al.  Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES) , 2014 .

[12]  Kihyung Lee,et al.  Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchanger , 2014 .

[13]  Hong Wang,et al.  A review of waste heat recovery technologies towards molten slag in steel industry , 2013 .

[14]  Pascal Henry Biwole,et al.  Phase-change materials to improve solar panel's performance , 2013 .

[15]  Naijun Zhou,et al.  Experimental study on Organic Rankine Cycle for waste heat recovery from low-temperature flue gas , 2013 .

[16]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[17]  Kamaruzzaman Sopian,et al.  CFD applications for latent heat thermal energy storage: a review , 2013 .

[18]  Markus Haider,et al.  Heat exchangers and thermal energy storage concepts for the off-gas heat of steelmaking devices , 2012 .

[19]  George Papadakis,et al.  Low­grade heat conversion into power using organic Rankine cycles - A review of various applications , 2011 .

[20]  Yue-Tzu Yang,et al.  Three-dimensional transient cooling simulations of a portable electronic device using PCM (phase change materials) in multi-fin heat sink , 2011 .

[21]  M. Rosen,et al.  Analytical approximation for solidification processes in PCM storage with internal fins: imposed heat flux , 2011 .

[22]  T. Bauer,et al.  Thermal energy storage for direct steam generation , 2011 .

[23]  R. Velraj,et al.  Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system , 2011 .

[24]  Ilhan Ozturk,et al.  On the relationship between energy consumption, CO2 emissions and economic growth in Europe , 2010 .

[25]  Jorma Heikkinen,et al.  Temperature optimisation of a diesel engine using exhaust gas heat recovery and thermal energy storage (diesel engine with thermal energy storage) , 2010 .

[26]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[27]  Jose M. Marin,et al.  PCM-air heat exchangers for free-cooling applications in buildings: Empirical model and application to design , 2009 .

[28]  Subrata Mondal,et al.  Phase change materials for smart textiles – An overview , 2008 .

[29]  Arun S. Mujumdar,et al.  Transient cooling of electronics using phase change material (PCM)-based heat sinks , 2008 .

[30]  Nobuhiro Maruoka,et al.  Exergy recovery from steelmaking off-gas by latent heat storage for methanol production , 2006 .

[31]  Philip C. Eames,et al.  Thermal regulation of building-integrated photovoltaics using phase change materials , 2004 .

[32]  A. Sari,et al.  Thermal and heat transfer characteristics in a latent heat storage system using lauric acid , 2002 .

[33]  José María Sala,et al.  Technological recovery potential of waste heat in the industry of the Basque Country , 1997 .

[34]  David P. Colvin,et al.  Microencapsulated phase-change material suspensions for heat transfer in spacecraft thermal systems , 1996 .

[35]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[36]  D. Gray,et al.  The validity of the boussinesq approximation for liquids and gases , 1976 .

[37]  Antonio Fasano,et al.  Numerical solution of phase-change problems , 1973 .