THE CHITRANJAN RANAWAT AWARD: In Vivo Knee Forces after Total Knee Arthroplasty

Tibial forces were measured in vivo during the first year after total knee arthroplasty in a 66 kg, 80-year-old man. Forces were measured during activities of daily living, rehabilitation, and exercise. Peak tibial forces recorded during walking increased up to 12 months postoperatively (2.8 times body weight). Tibial forces correlated with increasing speed during treadmill walking. Rising from a chair generated peak forces of 2.6 times body weight. Stair descent generated higher peak forces than stair ascent (3.3 versus 2.9 times body weight, respectively). Exercising on a stair-climbing machine generated forces close to two times body weight whereas stationary bicycling generated even lower forces, near one times body weight. In general, the tibial forces recorded during walking and stair climbing were lower than most predicted values. These measurements can be used to validate in vitro and mathematical models of the knee. This should lead to refined surgical techniques and to enhanced prosthetic designs that will improve patient function, patient quality of life, and longevity of total knee arthroplasty implants.

[1]  J B Morrison,et al.  The mechanics of the knee joint in relation to normal walking. , 1970, Journal of biomechanics.

[2]  A Seireg,et al.  The prediction of muscular lad sharing and joint forces in the lower extremities during walking. , 1975, Journal of biomechanics.

[3]  T. Andriacchi,et al.  A study of lower-limb mechanics during stair-climbing. , 1980, The Journal of bone and joint surgery. American volume.

[4]  M L Hull,et al.  On the relation between joint moments and pedalling rates at constant power in bicycling. , 1986, Journal of biomechanics.

[5]  D. Winter,et al.  An integrated biomechanical analysis of normal stair ascent and descent. , 1988, Journal of biomechanics.

[6]  T. Andriacchi,et al.  The influence of chair height on lower limb mechanics during rising , 1989, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[7]  P. Walker,et al.  The Dominance of Cyclic Sliding in Producing Wear in Total Knee Replacements , 1991, Clinical orthopaedics and related research.

[8]  T. Kotake,et al.  An analysis of sit-to-stand movements. , 1993, Archives of physical medicine and rehabilitation.

[9]  S. E. Irby,et al.  Instrumented implant for measuring tibiofemoral forces. , 1996, Journal of biomechanics.

[10]  D. D’Lima,et al.  Polyethylene Wear and Variations in Knee Kinematics , 2001, Clinical orthopaedics and related research.

[11]  G. Bergmann,et al.  Musculo-skeletal loading conditions at the hip during walking and stair climbing. , 2001, Journal of biomechanics.

[12]  M Honl,et al.  Duration and frequency of every day activities in total hip patients. , 2001, Journal of biomechanics.

[13]  P. Walker,et al.  Forces and moments telemetered from two distal femoral replacements during various activities. , 2001, Journal of biomechanics.

[14]  D. D’Lima,et al.  e-Knee: Evolution of the Electronic Knee Prosthesis Telemetry Technology Development , 2001, The Journal of bone and joint surgery. American volume.

[15]  Mauricio Silva,et al.  Average patient walking activity approaches 2 million cycles per year: pedometers under-record walking activity. , 2002, The Journal of arthroplasty.

[16]  William R Taylor,et al.  Tibio‐femoral loading during human gait and stair climbing , 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[17]  D. D’Lima,et al.  An implantable telemetry device to measure intra-articular tibial forces. , 2005, Journal of biomechanics.

[18]  Christopher Townsend,et al.  A multiaxial force-sensing implantable tibial prosthesis. , 2006, Journal of biomechanics.

[19]  D. D’Lima,et al.  Tibial forces measured in vivo after total knee arthroplasty. , 2006, The Journal of arthroplasty.