Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios

One of the least understood mechanisms of Li-ion batteries is the development of internal short circuits under mechanical loads. In this study, a micro mechanical model is developed and subjected to various loading scenarios to understand the sequence of failure in the multi-layer, multi-material structure of a Li-ion battery jellyroll. The constitutive response of each component of the electrode stack is obtained by comprehensive experimental tests using uniaxial and biaxial tensile and compressive loads. The homogenized response of the model is recovered through the computational homogenization theory. The model is validated by comparing the results of a macroscale simulation against experimental data. The study focuses next on the development of a failure criterion for the electrode stack based on the microstructural observations. Results show distinct failure mechanisms when the loading is predominantly tensile versus when it is compressive or combined tensile/compressive. A failure locus is plotted from the results of the simulations as a criterion to detect the onset of short circuit under complex multi-axial loading scenarios.

[1]  T. Wierzbicki,et al.  Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells , 2013 .

[2]  Alberto Salvadori,et al.  A multiscale framework for localizing microstructures towards the onset of macroscopic discontinuity , 2014 .

[3]  T. Wierzbicki,et al.  Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity , 2012 .

[4]  Mgd Marc Geers,et al.  Multi‐scale computational homogenization–localization for propagating discontinuities using X‐FEM , 2015 .

[5]  P. M. Squet.  Local and Global Aspects in the Mathematical Theory of Plasticity , 1985 .

[6]  T. Wierzbicki,et al.  Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions , 2012 .

[7]  Mgd Marc Geers,et al.  A multi-scale approach to bridge microscale damage and macroscale failure: a nested computational homogenization-localization framework , 2012, International Journal of Fracture.

[8]  J. Schröder,et al.  Computational homogenization analysis in finite plasticity Simulation of texture development in polycrystalline materials , 1999 .

[9]  J. Chaboche,et al.  FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials , 2000 .

[10]  Tomasz Wierzbicki,et al.  Modelling of cracks developed in lithium-ion cells under mechanical loading , 2015 .

[11]  Azadeh Sheidaei,et al.  Mechanical behavior of a battery separator in electrolyte solutions , 2011 .

[12]  W. Lai,et al.  Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions , 2014 .

[13]  Craig B. Arnold,et al.  Mechanical Properties of a Battery Separator under Compression and Tension , 2014 .

[14]  Fpt Frank Baaijens,et al.  An approach to micro-macro modeling of heterogeneous materials , 2001 .

[15]  W. Lai,et al.  Computational models for simulations of lithium-ion battery cells under constrained compression tests , 2013 .

[16]  Lars Greve,et al.  Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells , 2012 .

[17]  T. Wierzbicki,et al.  Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells , 2014 .