J‐integral fracture toughness and tearing modulus measurement of radiation cross‐linked UHMWPE

[1]  L. Pruitt,et al.  Study of fatigue resistance of chemical and radiation crosslinked medical grade ultrahigh molecular weight polyethylene. , 1999, Journal of biomedical materials research.

[2]  A. Edidin,et al.  Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. , 1999, Biomaterials.

[3]  C. Jewett,et al.  Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading conditions. , 1999, Biomaterials.

[4]  W. Harris,et al.  Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE). , 1999, Biomaterials.

[5]  F. Shen,et al.  Development of an extremely wear‐resistant ultra high molecular weight polythylene for total hip replacements , 1999, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[6]  T. Bauer,et al.  Comparison and quantitation of wear debris of failed total hip and total knee arthroplasty. , 1996, Journal of biomedical materials research.

[7]  A Sarmiento,et al.  The origin of submicron polyethylene wear debris in total hip arthroplasty. , 1995, Clinical orthopaedics and related research.

[8]  A H Burstein,et al.  Ultra-high molecular weight polyethylene. The material and its use in total joint implants. , 1994, The Journal of bone and joint surgery. American volume.

[9]  A. Pennings,et al.  Cross-linking of ultra-high molecular weight polyethylene in the melt by means of electron beam irradiation , 1989 .

[10]  P. Hendra,et al.  The morphology of linear polyethylenes crosslinked in their melts. The structure of melt crystallized polymers in general , 1987 .

[11]  M. Coscia,et al.  Foreign body reaction to polymeric debris following total hip arthroplasty. , 1987, Clinical orthopaedics and related research.

[12]  Kumar,et al.  Engineering approach for elastic-plastic fracture analysis , 1981 .

[13]  John R. Rice,et al.  Continuing crack-tip deformation and fracture for plane-strain crack growth in elastic-plastic solids , 1978 .

[14]  B. Wunderlich,et al.  Heat of fusion of polyethylene , 1967 .

[15]  R. Porter,et al.  Effect of temperature and polymer type on gel permeation chromatography , 1967 .

[16]  M. Jasty.  WEAR AND HIGH CYCLE FATIGUE OF A HIGHLY CROSSLINKED UHMWPE , 1999 .

[17]  A. Argon,et al.  Microstructural fracture processes accompanying growing cracks in tough rubber-modified polyamides , 1995 .