Development of an integrated model for the Campaspe catchment: a tool to help improve understanding of the interaction between society, policy, farming decision, ecology, hydrology and climate

Abstract. Management of water resources requires understanding of the hydrology and hydrogeology, as well as the policy and human drivers and their impacts. This understanding requires relevant inputs from a wide range of disciplines, which will vary depending on the specific case study. One approach to gain understanding of the impact of climate and society on water resources is through the use of an integrated modelling process that engages stakeholders and experts in specifics of problem framing, co-design of the underpinning conceptual model, and discussion of the ensuing results. In this study, we have developed such an integrated modelling process for the Campaspe basin in northern Victoria, Australia. The numerical model built has a number of components: Node/link based surface water hydrology module based on the IHACRES rainfall-streamflow model Distributed groundwater model for the lower catchment (MODFLOW) Farm decision optimisation module (to determine irrigation requirements) Policy module (setting conditions on availability of water based on existing rules) Ecology module (determining the impacts of available streamflow on platypus, fish and river red gum trees) The integrated model is component based and has been developed in Python, with the MODFLOW and surface water hydrology model run in external programs, controlled by the master program (in Python). The integrated model has been calibrated using historical data, with the intention of exploring the impact of various scenarios (future climate scenarios, different policy options, water management options) on the water resources. The scenarios were selected based on workshops with, and a social survey of, stakeholders in the basin regarding what would be socially acceptable and physically plausible options for changes in management. An example of such a change is the introduction of a managed aquifer recharge system to capture dam overflows, and store at least a portion of this in the aquifer, thereby increasing the groundwater resource as well as reducing the impact of existing pumping levels.

[1]  Philipp Kraft,et al.  Using Python as a coupling platform for integrated catchment models , 2010 .

[2]  M Bakker,et al.  Scripting MODFLOW Model Development Using Python and FloPy , 2016, Ground water.

[3]  E. Gaddis,et al.  Lessons for successful participatory watershed modeling: A perspective from modeling practitioners , 2008 .

[4]  H. Ross,et al.  Participatory development of a Bayesian network model for catchment‐based water resource management , 2010 .

[5]  Laurence Smith,et al.  The role of expert opinion in environmental modelling , 2012, Environ. Model. Softw..

[6]  B. Croke,et al.  Overcoming the challenges of using a rainfall–runoff model to estimate the impacts of groundwater extraction on low flows in an ephemeral stream , 2014 .

[7]  Anthony J. Jakeman,et al.  Development of a distributed flow model for underpinning assessment of water allocation options in the Namoi River Basin, Australia , 2006 .

[8]  S. Wheeler,et al.  Key Findings from a Survey of Sellers to the Restoring the Balance Programme , 2013 .

[9]  M. Alston,et al.  Climate change and water policy in Australia's irrigation areas: a lost opportunity for a partnership model of governance , 2011 .

[10]  Anthony J. Jakeman,et al.  Integrated assessment and modelling: features, principles and examples for catchment management , 2003, Environ. Model. Softw..

[11]  Jin Teng,et al.  Assessment of GCM simulations of annual and seasonal rainfall and daily rainfall distribution across south‐east Australia , 2011 .

[12]  Anthony J. Jakeman,et al.  Ten iterative steps in development and evaluation of environmental models , 2006, Environ. Model. Softw..

[13]  Anthony J. Jakeman,et al.  A catchment moisture deficit module for the IHACRES rainfall-runoff model , 2004, Environ. Model. Softw..

[14]  Preliminary assessment of conjunctive use opportunities in the Murray-Darling Basin: A case study in the lower Campaspe catchment , 2017 .

[15]  Jan Adamowski,et al.  Development of a software tool for rapid, reproducible, and stakeholder-friendly dynamic coupling of system dynamics and physically-based models , 2017, Environ. Model. Softw..

[16]  T. Söderqvist,et al.  Participatory Social-Ecological Modeling in Eutrophication Management : the Case of Himmerfjarden, Sweden , 2011 .

[17]  B. Croke,et al.  Modeling the Impact of Watershed Development on Water Resources in India , 2015 .

[18]  John MacBeath,et al.  Connecting Leadership and Learning : Principles for Practice , 2008 .

[19]  Jean-Luc de Kok,et al.  Reusability of model components for environmental simulation - Case studies for integrated coastal zone management , 2015, Environ. Model. Softw..

[20]  Richard G. Niswonger,et al.  MODFLOW-NWT, A Newton Formulation for MODFLOW-2005 , 2014 .

[21]  A. Arad,et al.  The hydrogeology, hydrochemistry and environmental isotopes of the Campaspe River aquifer system, North-Central Victoria, Australia , 1987 .

[22]  Saleem H. Ali Water scarcity and institutional reform in Southern Africa , 1999 .

[23]  Dietmar Pfahl,et al.  What Do We Know about Scientific Software Development's Agile Practices? , 2012, Computing in Science & Engineering.

[24]  B. Timbal,et al.  The Millennium Drought in southeast Australia (2001–2009): Natural and human causes and implications for water resources, ecosystems, economy, and society , 2013 .