Multiline short-pulse solid-state seeded carbon dioxide laser for extreme ultraviolet employing multipass radio frequency excited slab amplifier.

In this Letter we describe in more detail a solid-state seeded, nanosecond pulse, multiline CO(2) oscillator designed and built for the extreme ultraviolet (EUV) laser-produced-plasma (LPP) source. Our oscillator featured quantum cascade laser seeders, a diffraction-type seed beam combiner, and a radio-frequency-discharge-excited, diffusion-cooled, slab-waveguide CO(2) gain cell in a compact multipass regenerative amplifier configuration. The oscillator generated pulses of exceptional stability in terms of envelope, energy, and spectrum. Excellent stability of output was achieved without any additional techniques. The output spectrum consisted of two laser lines of a 00(0)1-10(0)0 band of a CO(2) molecule, P20 and P22, with a target of four lines P18-P24. The pulse duration was electronically adjustable between 11 and 35 ns at a repetition frequency from a few hertz to hundreds of kilohertz. Electronic adjustment of the pulse duration was achieved by relative timing offsets of individual seeders, opening an avenue to a range of on-line adjustments of pulse shape and spectral content timing. The jitter-tolerant operation allows for easy synchronization with an external event, such as a droplet target in an EUV LPP source. A resistance to parasitic seeding of more than 40 dB was recorded. The oscillator produced up to 20 W of average output power at a repetition rate of 100 kHz in a near-diffraction-limited beam of M(2)<1.3 and a pointing stability below 50 μrad.

[1]  Takashi Suganuma,et al.  Spectral characteristics of quantum-cascade laser operating at 10.6 μm wavelength for a seed application in laser-produced-plasma extreme UV source. , 2012, Optics letters.

[2]  D. Nakamura,et al.  Comparative study on EUV and debris emission from CO2 and Nd: YAG laser-produced tin plasmas , 2008 .

[3]  C. Wagner,et al.  EUV lithography: Lithography gets extreme , 2010 .

[4]  F. Goodwin,et al.  Intracavity CdTe modulators for CO 2 lasers , 1971 .

[5]  Takashi Suganuma,et al.  Wavefront measurement of single-mode quantum cascade laser beam for seed application in laser-produced plasma extreme ultraviolet system. , 2012, Optics letters.

[6]  A. Nath,et al.  Multiline operation of TEA CO2 laser with hot CO2, as an intracavity absorbing medium , 1979 .

[7]  R. Rooth,et al.  An independently adjustable multiline AM mode-locked TEA CO2laser , 1983, IEEE Journal of Quantum Electronics.

[8]  T Shimada,et al.  High-speed random access laser tuning. , 1999, Applied optics.

[9]  Bruno M. La Fontaine,et al.  LPP source system development for HVM , 2011, Advanced Lithography.

[10]  Toyohiko Yatagai,et al.  Systematic investigation of self-absorption and conversion efficiency of 6.7 nm extreme ultraviolet sources , 2010 .

[11]  Y. Kaufman Passive-Q-switching at high intensities and high absorber pressures. , 1976, Applied Optics.

[12]  S. Thomas,et al.  Amplification of multiline/multiband CO2 laser pulses , 1975 .

[13]  Koichi Toyoda,et al.  Characterization of various Sn targets with respect to debris and fast ion generation , 2007, SPIE Advanced Lithography.