High-speed optical modulator for application in instrumentation

The design and characterization of the first integrated optic modulator for a commercial instrument application are described. Alternative forms of modulation, including direct laser current modulation and optical heterodyne techniques, are reviewed for the application, which requires modulation to 20 GHz. The advantages of an integrated optic modulator fabricated using titanium in-diffused lithium niobate are discussed. Performance tradeoffs between x-cut and z-cut LiNbO/sub 3/ including bandwidth, modulation efficiency, bias point stability, and acoustic resonances are detailed. The x-cut device is found to give the best overall performance for this instrument application. Device reliability and testing, including temperature cycling, humidity, electrostatic discharge, mechanical shock, and vibration are described for complete packaged and pigtailed devices. >

[1]  John E. Bowers,et al.  InGaAs PIN photodetectors with modulation response to millimetre wavelengths , 1985 .

[2]  William K. Burns,et al.  Novel electrostatic mechanism in the thermal instability of z‐cut LiNbO3 interferometers , 1986 .

[3]  J. Orr,et al.  A Stable 2-26 .5 GHz Two-Stage Dual-Gate Distributed MMIC Amplifier , 1986, 1986 IEEE MTT-S International Microwave Symposium Digest.

[4]  S. Kawanishi,et al.  Wideband frequency response measurement of photodetectors using optical heterodyne detection technique , 1986 .

[5]  Tsutomu Kitoh,et al.  New travelling-wave electrode Mach-Zehnder optical modulator with 20 GHz bandwidth and 4.7 V driving voltage at 1.52 mu m wavelength , 1989 .

[6]  S Uehara.  Calibration of optical modulator frequency response with application to signal level control. , 1978, Applied optics.

[7]  Moshe Nazarathy,et al.  Coded phase-reversal LiNbO 3 modulator with bandwidth greater than 20 GHz at 1.3μm wavelength , 1987 .

[8]  P. C. Willis,et al.  Characterization of frequency dispersion in Ti‐indiffused lithium niobate optical devices , 1987 .

[9]  R. Alferness.  Waveguide Electrooptic Modulators , 1982 .

[10]  R. C. Booth,et al.  High Performance Hermetic Package For LiNbO3 Electro-Optic Waveguide Devices , 1989, Other Conferences.

[11]  R. Becker.  Circuit effect in LiNbO(3) channel-waveguide modulators. , 1985, Optics letters.

[12]  R. L. Jungerman,et al.  Optical receiver and modulator frequency response measurement with a Nd:YAG ring laser heterodyn technique , 1989 .

[13]  R. L. Jungerman,et al.  Low-frequency acoustic anomalies in lithium niobate Mach-Zehnder interferometers , 1988 .

[14]  Gregory Raybon,et al.  Optical intensity modulation to 40 GHz using a waveguide electro‐optic switch , 1987 .

[15]  R. B. Lauer,et al.  InGaAsP buried heterostructure laser with 22 GHz bandwidth and high modulation efficiency , 1987 .

[16]  John E. Bowers,et al.  High-speed InGaAsP constricted-mesa lasers , 1986 .

[17]  G. Astfalk,et al.  The photorefractive effect in titanium indiffused lithium niobate optical directional couplers at 1.3 µm , 1986 .

[18]  Moshe Nazarathy,et al.  Spread spectrum frequency response of coded phase reversal traveling wave modulators , 1987 .

[19]  R. C. Williamson,et al.  Photorefractive effects in LiNbO3 channel waveguides: Model and experimental verification , 1985 .

[20]  J. Mellis,et al.  Miniature packaged external-cavity semiconductor laser with 50 GHz continuous electrical tuning range , 1988 .

[21]  Hiroshi Ishikawa,et al.  Ultra-High speed InGaAsP/InP DFB lasers emitting at 1.3 µm wavelength , 1987 .