Strategy on Safety Function Implementation: Case Study Involving Risk Assessment and Functional Safety Analysis for a Power Assist System

Power assist systems are expected to bring many benefits in various fields, and some of them have already been introduced in the welfare and manufacturing industries. As power assist systems demand manual contact with a human operator, it is important to prevent hazards that originate from system faults. The objectives of this paper are to introduce a strategy on safety function implementation by means of a case study for a power assist system and to propose an approach for safety function design. This paper describes details of the strategy for Skill-Assist — the power assist system adopted as the experimental platform. First, the safety integrity level (SIL) required for Skill-Assist was determined, following which top-down and bottom-up risk assessments were conducted. A safety-related system (SRS) with a fail-safe fault detection device and dual-channel voting architecture was then constructed based on the risk assessment result. A functional safety analysis was performed for the SRS and we found that the SRS satisfied the required SIL. An experiment on the functionality of the SRS was performed and we verified the safety function for Skill-Assist set by the proposed strategy.

[1]  Suwoong Lee,et al.  Skill-Assist Safety and Intelligence Technology , 2009, Int. J. Autom. Technol..

[2]  Bev Littlewood,et al.  Modeling the Effects of Combining Diverse Software Fault Detection Techniques , 2000, IEEE Trans. Software Eng..

[3]  Masao Mukaidono,et al.  LSI Implementation and Safety Verification of Window Comparator Used in Fail-Safe Multiple-Valued Logic Operations (Special Issue on Multiple-Valued Integrated Circuits) , 1993 .

[4]  Günter Pritschow,et al.  A Fail-Safe Dual Channel Robot Control for Surgery Applications , 2001, SAFECOMP.

[5]  Yoji Yamada,et al.  FTA-based issues on securing human safety in a human/robot coexistence system , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[6]  Yoji Yamada,et al.  Proposal of Skill-Assist: a system of assisting human workers by reflecting their skills in positioning tasks , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[7]  Alin Albu-Schäffer,et al.  Requirements for Safe Robots: Measurements, Analysis and New Insights , 2009, Int. J. Robotics Res..

[8]  Edward J. McCluskey,et al.  A design diversity metric and reliability analysis for redundant systems , 1999, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034).

[9]  Rolf Dieter Schraft,et al.  PowerMate – A Safe and Intuitive Robot Assistant for Handling and Assembly Tasks , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[10]  E Hicham,et al.  Failure Mode and Effects Analysis (FMEA) , 2007 .

[11]  Aarnout Brombacher,et al.  Using a failure modes, effects and diagnostic analysis (FMEDA) to measure diagnostic coverage in programmable electronic systems , 1999 .

[12]  Hiroshi Maeda,et al.  Omnidirectional Cart with Power-assist System , 2002, J. Robotics Mechatronics.